Flowmeters

Manufacturer: DIGITEN Brand: DIGITEN

Voltage:DC12V Operation mode:N/C,normal close. Inlet/Outlet Ports:3/4" to 3/4",GB screw thread Response Time:ON≤0.15s,OFF≤0.3s Rectification: synchronous rectification Pressure:0.02-0.8Mpa Temperature:0-100°C Estimated Valve Life:500,000 Cycles Filter Screen:Stainless Steel Inlet Filter Flow characteristic:0.02Mpa≥3 L/min;0.1Mpa≥12 L/min;0.8Mpa≥35 L/min Usage:water and low viscosity fluids.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMA-26

The Dwyer Rate-Master series RMA flowmeter is a 2" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 4% of full scale. An integral flow guide stabilizes the float throughout the range for consistent readings. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Models are available for measuring air flow in scfh, lpm, or cc/min. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow, or with a top-mounted valve for vacuum applications. Hardware is included for panel or surface mounting. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices. SpecificationsScale length2"Accuracy+ or – 4% of full scaleConnections1/8" female NPT inlet and outletPressure rating100 psi/6.9 barTemperature rating54 degrees C/130 degrees FWetted materialsBody: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve); float (varies by range): black glass, nickel/copper alloy, stainless steel, or tungsten carbideDimensions (H x W x D)12.22 x 2.54 x 3.02 mm/4-13/16 x 1 x 1-3/16 inchesWeight113.4 g/4 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applica...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMA-1

The Dwyer Rate-Master series RMA flowmeter is a 2" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 4% of full scale. An integral flow guide stabilizes the float throughout the range for consistent readings. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Models are available for measuring air flow in scfh, lpm, or cc/min. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow, or with a top-mounted valve for vacuum applications. Hardware is included for panel or surface mounting. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices. SpecificationsScale length2"Accuracy+ or – 4% of full scaleConnections1/8" female NPT inlet and outletPressure rating100 psi/6.9 barTemperature rating54 degrees C/130 degrees FWetted materialsBody: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve); float (varies by range): black glass, nickel/copper alloy, stainless steel, or tungsten carbideDimensions (H x W x D)12.22 x 2.54 x 3.02 mm/4-13/16 x 1 x 1-3/16 inchesWeight113.4 g/4 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applica...

Manufacturer: HealthCentre Brand: HealthLand

The Wrights peak flow meter with a standard EU scale used for the assessment of flow rate an indicater of Asthma and other pulmonary conditions

Manufacturer: uxcell Brand: uxcell Model: a11072800ux0014

LZM serial flow meter, which is made of plastic material, is used to measure the single-phase non-pulsating flux of liquid.

Manufacturer: uxcell Brand: uxcell Model: a15112000ux0004

With 2-port flow meter, which is mainly made of plastic material, is used to measure the single-phase non-pulsating flux of liquid.Straight tube style connect the liquid tube by two male thread, easy to read for its clear scale.

Manufacturer: Koolance Brand: Koolance Model: DCB-FM01

The DCB-FM01 displays flow rate or pulse signals from Koolance INS-FM16, INS-FM17N, INS-FM18, or INS-FM19 flow meters. Display units can be toggled between liters per minute, gallons per minute, or raw impeller pulse rate (Hz). Pulse rate conversion can also be manually configured on the DCB-FM01 for custom flow meters. An aluminum mounting bracket is included for computer 5.25in drive bay installation. DCM-FM01 has a separate output, if used, which multiplies the flow meter signal for readability by most fan tachometer headers. This output is intended to allow fan detection software or BIOS to enable the appropriate alarm or shutdown procedure if the flow meter impeller stops rotating. The "RPMs" represent approximate coolant flow rate in mL/min and not the flow meter's revolutions. Power input is 12V DC.  

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMA-2-BV

The Dwyer Rate-Master series RMA flowmeter is a 2" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 4% of full scale. An integral flow guide stabilizes the float throughout the range for consistent readings. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Models are available for measuring air flow in scfh, lpm, or cc/min. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow, or with a top-mounted valve for vacuum applications. Hardware is included for panel or surface mounting. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices. SpecificationsScale length2"Accuracy+ or – 4% of full scaleConnections1/8" female NPT inlet and outletPressure rating100 psi/6.9 barTemperature rating54 degrees C/130 degrees FWetted materialsBody: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve); float (varies by range): black glass, nickel/copper alloy, stainless steel, or tungsten carbideDimensions (H x W x D)12.22 x 2.54 x 3.02 mm/4-13/16 x 1 x 1-3/16 inchesWeight113.4 g/4 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applica...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMA-12-SSV

The Dwyer Rate-Master series RMA flowmeter is a 2" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 4% of full scale. An integral flow guide stabilizes the float throughout the range for consistent readings. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Models are available for measuring air flow in scfh, lpm, or cc/min. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow, or with a top-mounted valve for vacuum applications. Hardware is included for panel or surface mounting. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices. SpecificationsScale length2"Accuracy+ or – 4% of full scaleConnections1/8" female NPT inlet and outletPressure rating100 psi/6.9 barTemperature rating54 degrees C/130 degrees FWetted materialsBody: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve); float (varies by range): black glass, nickel/copper alloy, stainless steel, or tungsten carbideDimensions (H x W x D)12.22 x 2.54 x 3.02 mm/4-13/16 x 1 x 1-3/16 inchesWeight113.4 g/4 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applica...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMA-21-SSV

The Dwyer Rate-Master series RMA flowmeter is a 2" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 4% of full scale. An integral flow guide stabilizes the float throughout the range for consistent readings. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Models are available for measuring air flow in scfh, lpm, or cc/min. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow, or with a top-mounted valve for vacuum applications. Hardware is included for panel or surface mounting. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices. SpecificationsScale length2"Accuracy+ or – 4% of full scaleConnections1/8" female NPT inlet and outletPressure rating100 psi/6.9 barTemperature rating54 degrees C/130 degrees FWetted materialsBody: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve); float (varies by range): black glass, nickel/copper alloy, stainless steel, or tungsten carbideDimensions (H x W x D)12.22 x 2.54 x 3.02 mm/4-13/16 x 1 x 1-3/16 inchesWeight113.4 g/4 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applica...