Flowmeters - Page 4

Manufacturer: Kartell Brand: Kartell Model: DYNCR 227145

This bright red paddlewheel flow Indicator is made of polystyrene and indicates liquid or gas flow from 5mL per second to 95mL per second. The clear outer case allows for unobstructed view of the wheel which spins freely with flow. It is not for use with corrosive fluids or temperatures over 122°F (50°C). It can be used to connect tubing with internal dimensions of 3/8 to 9/16 inch (10-14mm). Dimensions (L x W x H): 3.5 x 0.625 x 1.625 inch. Dynalon #: 227145.

Manufacturer: PRM Brand: PRM Model: WM125PVX

PRM multi-jet water meters are known for their wide range, simplicity, and accuracy in low quality water. Features: Silicone Rubber Seals, Sealed Dry Dial for Clear Readings, Internal Strainer to Protect Meter from Particulate Damage, Magnetic Drive for lower resistance. Specifications: Class:B, Accuracy: Transitional Flow: ± 5% Nominal Flow: ± 2%. Maximum Water Temperature: 104°F. Maximum Water Pressure: 232 psi. Mounting Orientation: Horizontal. Materials: Body: Brass, polyethylene, Couplings: Brass, Measuring Chamber: Polyethylene, Paint: Epoxy Coated, Seal: Black: Silicone Rubber, White: HDPE; Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS.

Manufacturer: Fill-Rite Brand: Fill-Rite Model: 807C1

The 807C1 Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and heptane. Fill-Rite meters provide precision and durability in a cost-effective design. The 807C1 is a 3 wheel mechanical meter designed for transfer pumps with a flow rate of 5 to 20 gallons per minute. This meter has a 1 " inlet and outlet.

Manufacturer: Racine Federated Brand: Hedland Model: H629-004-R

EZ-View flow meters for water. EZ to install, in any position. Radel R for more aggressive media. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Radel R plastic body and cone, polysulfone piston. Common parts are T300-series stainless spring, Buna N indicator ring, Buna N pressure seals, PVC fittings, Polypropylene limit indicators, PH15 - 7MO stainless retaining ring. Optional are Teflon coated spring and retaining ring. NPT ANSI/ASME B1.20.1, BSPT ISOR7 fittings/ threads.

Manufacturer: GPI Brand: GPI® The Proven Choice® Model: 126300-04

The GPI model 126300-04 is a MR 5-30-L8N, MR 5-30 Series Mechanical Fuel Meter. This Mechanical Fuel Meter is calibrated in liters with 1" NPT thread inlet/outlet connection. It is C UL US Listed, and its flow range is 19 to 114 LPM. Its unique features are that it has a large, easy to read display and a turn knob to reset. It's to be used with Diesel, Gasohol (Gasoline/Ethanol blends - E10 maximum), Gasoline, and Kerosene. It has an aluminum housing, and its operating temperature is -20 to 125°F.

Manufacturer: Fill-Rite Brand: Fill-Rite

Fill-Rite 3/4" Mechanical Flow MeterMechanical flow meters that provide precision and durability in acost-effective design.The Series 800C meter's exclusive unicastcomponent mounting configuration assures consistency, particularly ingravity flow applications. The 800C is accurate to within ± 1%. Large, easy to read register Flow ports can be positioned vertically or horizontally UL/cUL listed Gallon or liter reading Handles fluid of any viscosity Strainer for gravity-flow applications traps tank contaminants

Manufacturer: Racine Federated Brand: Hedland Model: H601A-015

Manufacturer: Racine Federated Brand: Hedland Model: H601A-010

Flow Meter For Petroleum Fluids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 0.876 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. COMMON PARTS are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: SAE 1070/1090 Carbon Steel, Retaining Spring: SAE 1070/1090 Carbon Steel, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.

Manufacturer: Racine Federated Brand: Hedland Model: H601A-002

Flow Meter For Petroleum Fluids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 0.876 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. COMMON PARTS are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: SAE 1070/1090 Carbon Steel, Retaining Spring: SAE 1070/1090 Carbon Steel, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.

Manufacturer: Tuthill Brand: Fill-Rite Model: 901C

The 901 Mechanical Flow Meter has a large easy to read display, flow ports can be positioned vertically or horizontally, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and heptane. Fill-Rite meters provide precision and durability in a cost-effective design. The 901 meter is a 4 wheel mechanical meter designed for transfer pumps with a flow rate of 6 to 40 GPM (gallons per minute). This meter has a 1 " inlet and outlet.