HHIP 4101-0010 (M0-) Pin Gage Set (0.011" - 0.060"), 50 Piece

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class X inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage. All gages measure 2” long, and are within .00002â�...

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class X inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage. All gages measure 2” long, and are within .00002â�...

Manufacturer: AR Specialties LLC Brand: AR Specialties LLC

The Field gauge is used to measure the absolute maximum allowable, safe chamber headspace. If the bolt closes on the Field Gauge it is considered unsafe and should be taken out of service for repair. This gauge ships only in the USA, No export or APO...

Manufacturer: Fibre-Metal Brand: Howard Leight Model: 280-WFG

Blades pivot for easy measuring of eleven most specific fillet dimensions. Carry in pocket. Etched increments standard and metric equivalents. Fits in 4 1/2 inch x 2 inch case. Measures concave or Convex seams. Stainless steel blades.

Manufacturer: AR Specialties LLC Brand: AR Specialties LLC

The 5.56 NATO MAX gage is used to measure the maximum allowable 5.56 chamber headspace. If the bolt closes on the MAX Gage it is considered unsafe headspace and should be taken out of service for repair. This is the 5.56 spec 1.4736" gage, and not th...

Manufacturer: Forster Brand: Forster Products

The Go gauge is used to measure the minimum allowable, safe chamber headspace. If the bolt does not close on a Go gauge, it is considered unsafe. Must have for rechamber jobs to set the new headspace. This gauge ships only in the USA, No export or AP...

Manufacturer: AR Specialties LLC Brand: AR Specialties LLC

Forster marks this gauge as 308 since it is in the 308 family. But it is custom sized and only marked with the size. It is not marked GO since it is not SAAMI sized GO specs. No instructions, since this is custom sized for setting headspace during ba...

Manufacturer: AR Specialties LLC Brand: AR Specialties LLC

The GO gauge is used to measure the minimum allowable, safe chamber headspace. If the bolt does not close on a GO gauge, it is considered unsafe. Must have for rechamber jobs to set the new headspace or to verify the correct headspace of a new barrel...

Manufacturer: HHIP Brand: HHIP Model: 4101-0011

Supplied in a plastic, sturdy, dust-proof case. ~ Sizes are marked on the case for easy Identification. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Class ZZ ~ Overall length is 2". ~ Set is -0.0002" + 0.0000".