|
|
-
4.3 of 5.0 with 14 Reviews
SALE PRICE: $200.85 1% OFF
Manufacturer: Black Box
Brand: Black Box
Model: LSPGIG
Manufacturer: Black Box
Brand: Black Box
Model: LSPGIG
10/100/1000 BASE T SFP W/ RJ-
-
4.3 of 5.0 with 39 Reviews
SALE PRICE: $210.50 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: VERSIV-SM-CASE
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: VERSIV-SM-CASE
VERSIV SMALL CARRY CASE
-
4.3 of 5.0 with 19 Reviews
SALE PRICE: $219.41 1% OFF
Manufacturer: Byte Brothers, Inc.
Brand: Byte Brothers
Manufacturer: Byte Brothers, Inc.
Brand: Byte Brothers
Cat 5/6 cables are jammed with data, VoIP phones IP security cameras and 48 volts of PoE ("Power over Ethernet"). The Power Panel DVM spots these devices. Plus, two interactive buttons exercise switches by prompting both data and power (PoE). If you install IP cameras or VoIP phones, there is an inline model that passes PoE power to the device and measures power in watts.
-
4.3 of 5.0 with 29 Reviews
SALE PRICE: $226.50 2% OFF
Manufacturer: Greenlee
Brand: Greenlee
Model: TM-700T
Manufacturer: Greenlee
Brand: Greenlee
Model: TM-700T
|
ase. DSL compatible in both Monitor and Talk modes, the TM-700 s LCD screen makes reading polarity, voltage, current, and ringing frequencies easier than ever, and clearly shows speed dials and recent numbers for faster access The TM-700 features over-voltage and over-current detection for safer operation and also features an intercom mode, a built in toner for pair tracing, and DTMF detection and measurement for enhanced productivity. Use the built in loudspeaker or with a headset (included) for easy hands free operation. The Greenlee Communications TM-700 makes your job faster, safer, and easier. Features LCD for easy dialing, programming, caller ID, voltage, current, ringing, and DTMF measurements Safe over voltage and over current protection Intercom for dead-pair talking SmartIntercom between Tele-Mate Pros (including PE830); allows ringing the far end Tone generator for pair identification Luminescent (glow-in-the-dark) keypad DSL line filter Super Impedance Amplifier to monitor lines without disrupting traffic Tone and Pulse dialing for old and new phone lines with Pause and Flash (TBR) User options allow USA or ETSI telephony with individual options available RJ11 socket for easy cord changes Ten last number redial . Allows alerting over a dead pair of wires. When a call is requested from one unit, the other unit wakes up, validates the request and acknowledges with a unique tone. Intercom . Talk over a dead pair of wires Toner . A built-in pair tracing toner is provided. The frequencies chosen are suitable for use with Greenlee probes, as well as any other probe that works in the audio range. Loudspeaker . Make many jobs hands free. Note: Loudspeaker does not allow duplex speech, use supplied headset instead. Headset . Convenient 2.5mm jack is provided for use with earpiece and microphone. Photo-Luminescent Keymat . Advanced silicone rubber keypad glows after exposure to light, aiding operation in low light conditions. Warranty . One year limited warranty
-
4.3 of 5.0 with 24 Reviews
SALE PRICE: $241.99 1% OFF
Manufacturer: T3 Innovation
Brand: T3 Innovation
Model: SSK250
Manufacturer: T3 Innovation
Brand: T3 Innovation
Model: SSK250
|
The T3 Innovation SSK250 Snap Shot cable finder is a hand-held meter to test voice, data, or video cables, either uninstalled or installed and energized, for length, faults, and distance to faults from one end up to 3,000'. This unit is compatible with coaxial, data, or electrical cables. The meter uses spread spectrum time-domain reflectometry (SSTDR) and measures in both feet and meters with an accuracy of at least 1 percent. Functions of this meter include calibrating nominal velocity of propagation (NVP) values, storage of most used NVP values, loop test for continuous testing, four-tone generator for cable tracing and identification, and auto-off. The LCD screen is backlight for visibility. The unit requires 4 AA alkaline batteries (sold separately) and comes with an F-to-RJ45 plug, BNC-to-alligator clips cable, F-connector-to-alligator clips cable, F-connector coupler, F-jack-to-BNC adapter, tone probe, and a hanging carrying pouch.SpecificationsCable compatibilityCoaxial, data, or electricalTests performedFaults, total cable distance, and cable distance to faultPower supply4 AA alkaline batteriesWeight340 g (12.0 oz.) with batteries (sold separately)Dimensions*17.3 x 8.0 x 3.3 cm (6.8 x 3.15 x 1.3 inches) (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.T3 Innovation manufactures handheld testing equipment for use in the telecommunications, networking, and electrical design and maintenance industries. Established in 2009, T3 Innovation is headquartered in Camarillo, CA.What's in the Box?SS250 SnapShot main unitCA001 Cable assembly, insulated push-on F to RJ45 plugCA002 Cable assembly, insulated BNC to alligator clipsCA003 Cable assembly, insulated push-on F-connector to alligator clipsAD001 F-Connector coupler, high performance F81AD002 Adapter, F-Jack to BNC jackTP200 TrakAll Tone ProbeCP100 Hanging T3 pouch
-
4.3 of 5.0 with 23 Reviews
SALE PRICE: $243.98 1% OFF
Manufacturer: Tellid Communication Technology CO., LTD
Brand: Tellid
Model: TLD1485-2
Manufacturer: Tellid Communication Technology CO., LTD
Brand: Tellid
Model: TLD1485-2
|
TLD1485 system are the integrated device of optical power Meter and Optical Laser source, which can be used for optical power module 0.63 ~ 1.65 ¦Ì m band in the optical power detection. The device are supplied by the original manufacturer Tellid, the unique shell. We supply CE certification, one year warranty. It has mw, dB and dBm units for optical power measurement which can be used to direct optical power measurement< br> Technical Specification Type:TLD1485-2 Detector: InGaAs Measurement Range: -50~ +26DBm Optical interface:FC Emitter Type: LD or DFB-LD Operating Wavelength:850,1300nm Output Power(dBm): < -7 Dimensions(cm): 16.5¡Ã8.0¡Ã3.5cm Weight(g):350g Optical converter:FC(SC,ST optional) Standard Packages Handheld Optical Multi Meter:1pc Package bag:1pc Manual:1pc AC adapter for power supply:1pc ST/SC Converters( Optional):1pc Applications Optical device production and research Testing and maintenance of fiber-optic network Teaching and test optical communication
-
4.3 of 5.0 with 6 Reviews
SALE PRICE: $252.13 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: DSP-PM14A
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: DSP-PM14A
TE Connectivity ULTIM8 (T568A) Personality Module
-
4.3 of 5.0 with 6 Reviews
SALE PRICE: $293.96 22% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: T-300
Manufacturer: Amprobe
Brand: Amprobe
Model: T-300
T-300Current Tracer Transmitter for Amprobe advanced circuit tracers.
-
4.3 of 5.0 with 27 Reviews
SALE PRICE: $295.00 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: TRC-MPO-PP-B
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: TRC-MPO-PP-B
Fluke Networks Type B polarity - Testing device cable - MPO (M) - MPO (M) - 3.3 ft - for MultiFiber Pro Optical Power Meter and Fiber Test Kits
-
4.3 of 5.0 with 18 Reviews
SALE PRICE: $325.00 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 52801RJ9
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 52801RJ9
The Fluke Networks TS52 PRO Test Set features the latest in test set technology. Designed with a superior, radiant liquid crystal display (LCD) user interface, it allows you to see what cannot be heard in any outside plant environment. The back lit LCD and phosphorescent (glow-in-the-dark) keypad brings light to even the darkest of work environments, providing perfect line diagnostic clarity. The TS52 PRO Test Set is also equipped with 2-way speakerphone and DataSafeâ„¢ Pro data protection technology featuring superior high-impedance monitoring, Data Lockout and Lockout Override, making you completely safe.
|
|