Current Probes - Page 14

Manufacturer: AEMC Brand: AEMC Model: MN05

Small and compact, the AC current probe model MN05 is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications. With its two ranges, it offers excellent resolution for measuring AC intensities from 5mA to 100A. Designed to EN 61010, 600V CAT III safety standard. Double insulation. CE mark. Applications: Measuring in breaker panels. Industrial loads. HVAC. Residential and commercial sites. Data logging/recording. Fall height 4.92 ft (1.5m) (IEC 68-2-32). Shock protection 3.52 oz (100g)/6ms/half-period (IEC 68-2-27). Self-extinguishing capability casing UL94 V2. Vibration resistance IEC 68-2-6. Measures 4-27/63" length by 1-15/32" width by 1-1/64" depth.

Manufacturer: IDI Brand: IDGroup

Contact Probes CONCAVE .100 CENTER

Manufacturer: Fluke Corporation Brand: Fluke Model: FVF-BASIC

FlukeView Forms Basic can be used alone to download measurement data and create reports that can be saved and printed. FlukeView Forms comes with an array of standard analysis and reporting forms that get you started on displaying your data in tables, graphs or helpful diagrams. You can leave notes on the forms to draw attention to a particular event. Share or store your data with co-workers or clients - print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data. To address the increasing demands for reporting and documentation. It increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. The ability of FlukeView Forms to support multiple instruments enables the user to install and learn only one software application in order to use these multiple tools fully. Owners of Fluke 280 series, 180 series, 789 and 1550B, who do not need the full power of FlukeView forms, can use FlukeView Basic version. Transfer data points from your meter to your PC and use the two standard, non-customizable forms to display your readings in table or graphical form. For a larger array of forms or to use FlukeView Forms Designer to customize your forms, upgrade to FlukeView Forms version 3.3 with FVF-UG (sold separately). Comes with USB/IR cable. Number of standard forms: 2. Number of multiple meters whose data can be viewed simultaneously: 1. Number of concurrently running instances of FlukeView Forms allowed: 1. Requirements: Operating system: Windows 2000, Windows XP, Windows Vista or Windows 7. Minimum PC Hardware: Pentium class or better microprocessor, 32 MB RAM, 70 MB hard disk space (100 MB to install), USB port. FlukeView Forms supports the following test tools: 280 Series, 789, 1550B, 1653, 180 Series. Size: 203 x 100 x 50mm.

Manufacturer: Fluke Corporation Brand: Fluke Model: TLK282

Kit includes insulation piercing clip set, automotive back probe pins (five), SureGrip silicone test lead set, SureGrip test probe set. Also includes SureGrip alligator clip set, SureGrip large jaw alligator clip set, SureGrip hook clip set, Soft case. Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and MAP sensors. A hook probe with plunger actuation allows quick connection to pins or exposed conductors. Tested to 60V DC.

Manufacturer: Fluke Corporation Brand: Fluke Color: T+PRO-1AC KIT

The T+Pro-1AC Electrical Tester and AC Voltage Detector Kit includes the Fluke T+Pro electrical tester for measuring AC and DC voltage to 600V and the Fluke 1AC-II voltage detector to test for energized circuits. The T+Pro electrical tester measures AC and DC voltage to 600V and resistance to 9.99 kilohms, and it indicates voltage via an LED light bar, sound, and vibration. An audible and visible continuity sensor confirms that a circuit conducts electricity. Its LCD screen displays test results, and backlighting helps eliminate light reflections and improves contrast in low-light conditions. A data hold function keeps a reading on the display for recording. It has a built-in flashlight for use in low light, and a GFCI (ground fault circuit interrupter) trip to verify functionality of GFCI circuits or components. It can detect the direction of a rotary field in a three-phase system when measured phase to phase. The unit operates on two AAA batteries, and it has a low-battery indicator that signals when the batteries need to be replaced. It meets International Electrotechnical Commission (IEC) safety standards 61010-1, and is rated for CAT IV installations to 600V, which covers measurements at the source of the low-voltage supply such as electricity meters and overcurrent protection devices, and CAT III installations to 1,000V, which covers items used with enclosed building circuit installations, such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply. It comes with a test lead wrap, a pair of test probes, and instructions.The T+Pro comes with the Fluke 1AC-II voltage detector for detecting AC voltage from 90V to 1,000V. This voltage detector has visible and audible voltage indicators, and it performs a self-test to visually indicate that it is working. The unit automatically turns off after five minutes of nonuse to conserve battery life, and it signals when the meter's batteries need to be replaced. The unit operates on two AAA batteries....

Manufacturer: Fluke Corporation Brand: Fluke Model: 3460346 Color: Yellow

Fluke IR Windows are the most rugged on the market, with a heavy duty aluminum housing and arc-flash resistance to increase safety when conducting thermal inspections. Engineered and tested to withstand electric-arcs up to 50 kA for 30 cycles. Certified by UL and CSA for Type 3/12 (outdoor) environments in North America, these C-Range windows are tested to withstand the long term aging effects of UV exposure. Certified by SIRA Certification IP65 (outdoor) environments in Europe. The CLIRVU coating-exclusive to Fluke IR Windows-seals the optic prior to assembly to protect against moisture degradation. The Quadraband optic is IR-Fusion compatible, allowing the thermographer to see potential problems in visual light and thermographic mode. Each C-Range window is delivered with an identification plate attached for unique, on-site numbering for rapid location confirmation and faster repairs. Each infrared window comes complete with a security access key, installation instructions and self-adhesive drilling template. Maximum temperature: 659 degrees C. Warranty: lifetime replacement against manufacturing defects.

Manufacturer: Fluke Corporation Brand: Fluke Model: TL1550B

Replacement test lead set for the Fluke 1550B MegaohmMeter. 3 test leads (red, black, green) connected to low-leakage probes. 3 alligator clips (red, black, green). Maximum jaw opening: 26mm (1"). Length (lead only): 2.6m (8.6'). Cat II 1000 V, Cat III 600 V, 5kV DC max (probes). Cat II 1000 V, Cat III 600 V, 20 amps (alligator clips).

Manufacturer: Fluke Corporation Brand: Fluke Model: FVF-SC2

FlukeView Forms plus Designer allows a user to edit an existing form or create a new form to customize the report to individual needs. To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. The ability of FlukeView Forms to support multiple instruments enables the user to install and learn only one software application in order to use these multiple tools fully. Use the FlukeView Forms plus Designer to customize your reports or add your company logo. Share or store your data with co-workers or clients - print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data. With USB/IR cable. FlukeView Forms supports the following test tools: 280 Series, 53-II B and 54-II B, 789, 1550B, 1653, 180 Series. Number of standard forms: 9. Able to modify standard forms. Includes FlukeView Forms Designer for customizing forms. Number of multiple meters whose data can be viewed simultaneously: 8. Number of concurrently running instances of FlukeView Forms allowed: 4. Ability to change company name on report. Supports multi-page forms. Requirements: Operating system: Windows 2000, Windows XP, Windows Vista or Windows 7. Minimum PC Hardware: Pentium class or better microprocessor, 32 MB RAM, 70 MB hard disk space (100 MB to install), USB port. Size: 203 x 100 x 50mm.

Manufacturer: Harwin Brand: Harwin

Test Sockets SMT PCB Socket Horizfor 1mm P

Manufacturer: AEMC Brand: AEMC Model: 2960.1

Battery – Replacement 12V NiCD for Models 4500, 5100 and 5110.