Current Probes - Page 30

Manufacturer: Fluke Corporation Brand: Fluke Model: 617727

The Fluke i410 current clamp is an accessory that extends the range of digital multimeters for measuring current in electrical testing applications. An attached 1.6m output cable connects the clamp to a compatible multimeter that can accept safety-shrouded banana plugs and display 1 milliVolt (mV). It has a clamp that measures AC and DC current to 400 amp. The clamp has two jaws that can close around an electrical conductor up to 30mm in diameter to measure current without touching or interrupting the circuit. It has a zero error adjustment to set the mulitmeter's display to zero for accurate DC readings. The unit operates on one 9V battery. It meets International Electrotechnical Commission (IEC) safety standards 61010-1 and is rated for CAT III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The European Conformity (CE) marking indicates compliance with applicable European Union directives. The unit comes with a battery and instructions. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.SpecificationsMaximum AC input400 ampMaximum DC input400 ampOutput level1mV per amp DC or ACBasic accuracy3.5% + 0.5 ampInstallation ratingCAT III, 600VStandards metIEC safety standard 61010, CE markingPower supply9VWeight0.5 kg/17.6 oz.Dimensions209 x 78 x 48mm/3.09 x 8.21 x 1.87 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Clamp meters, also called clamp-on meters, measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. A current clamp has two ...

Manufacturer: AEMC Brand: AEMC Model: SR193-BK

Model SR193-BK is a AC current probe with 10 feet leads. Model SR193-BK is of 1200A capacity. For use with models 3945/3945-B, 8220, 8230, 8335, L104 and L564.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV300

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Fluke Brand: Fluke Model: 4542264

The Fluke Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications.

Manufacturer: IDI Brand: IDGroup

Contact Probes HEADED 4PT CROWN

Manufacturer: AEMC Brand: AEMC

AC/DC Current Probe Model SL201 measures low DC or AC from 50mA to 150ADC, 120AAC. This battery-powered clamp-on probe may be used with digital multimeters, voltmeters, or other voltage-measuring instruments. The probe jaws clamp around the conductor under test, allowing current measurements without breaking the circuit. Hall sensor technology senses the magnetic field produced by the current measured, and generates a millivolt DC or AC output signal. The narrow jaw is designed for optimum use in crowded wiring in industrial and automotive environments.

Manufacturer: GMW Associates Brand: GMW Associates

The CPCO Series (77mm) DC-AC Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of +/-500A, +/-1000A, +/-2000 or +/-4000A with an accuracy of +/-1% and non-linearity of

Manufacturer: GMW Associates Brand: GMW Associates

The CPCO Series (77mm) DC-AC Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of +/-500A, +/-1000A, +/-2000 or +/-4000A with an accuracy of +/-1% and non-linearity of

Manufacturer: GMW Associates Brand: GMW Associates

The CPCO Series (77mm) DC-AC Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of +/-500A, +/-1000A, +/-2000 or +/-4000A with an accuracy of +/-1% and non-linearity of

Manufacturer: GMW Associates Brand: GMW Associates

The CPCO Series (77mm) DC-AC Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of +/-500A, +/-1000A, +/-2000 or +/-4000A with an accuracy of +/-1% and non-linearity of