Current Probes - Page 48

Manufacturer: Radiall Brand: Radiall

Test Leads BLM N FR3 N 10CM BLM N

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Clips MINI CLIP / 2mm BJAK

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-54-2 B 60HZ

The Fluke 50 Series II digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40" cables that measure from -40 to +260 degrees C (-40 to +500 degrees F). It can store up to 500 points of data for analysis and monitoring, and it has an infrared communication port for exporting data to a computer for analysis. This thermometer provides the relative time of minimum, maximum, and average temperature measurements for monitoring. It has an offset function that allows the operator to compensate for thermocouple errors and increase accuracy. The thermometer body protects against splashing water and dust, and it comes in a holster that absorbs impact to help protect against damage if dropped. The thermometer enters sleep mode after 20 minutes of inactivity to help preserve battery life. It conforms to National Institute of Standards and Technology (NIST) standards for compliance with regulations. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and CSA mark indicates compliance with applicable Canadian Standards Association directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in industrial and manufacturing environments. Specifications Type K temperature range -200 to +1372 degrees C (-328 to +2501 degrees F) Type J temperature range -210 to +1200 degrees C (-346 to +2192 degrees F) Type T temperature range -250 to +400 degrees C (-418 to +752 degrees F) Type E temperature range -150 to +1000 degrees C (-238 to +1832 degrees F) Type N temperature range -200 to +1300 degrees C (-328 to +2372 degrees F) Type R and Type S temperature range 0 to 1767 degrees C (32 to 3212 de...

Manufacturer: AEMC Brand: AEMC Model: 2151.23

Lead – One Shielded Safety Lead (Red) 45 Feet with Hippo Clips (15kV) for Megohmmeter Models 6550 and 6555.

Manufacturer: Mueller Electric Brand: Mueller Electric

Test Plugs & Test Jacks Black Dual Ban Plug

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Plugs & Test Jacks 4MM BANANA JACK TO 2MM BA

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 5323014

The Mahr P2004F Millimar series inductive probe includes a non-detachable 8' length of cable and is intended for use with Millimar series evaluation instruments (sold separately) that accept Mahr Federal-style probes. The probe has a measuring range of +/- 0.079" and a 0.75N measuring force at the electrical zero point. This inductive probe meets Ingress Protection (IP) 64 standard for protection from dust and water, and is suitable for use in a variety of linear and angular measurement applications, such as the radial or axial runout of a machined piece.Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital display. Dial indicator gauges measure through a spring-loaded plunger driven into its shaft. The pointer on the dial display marks the degree the plunger is depressed, while an additional turn counter may track the number of times the pointer has spun around the dial. For all types of indicator gauges, runout is typically measured when the tip of the plunger (the point) is held perpendicular to the rotating workpiece. Indicator gauges are typically used in manufacturing, machining, and mechanical engineering.Mahr Federal manufactures dimensional metrology instruments and metering systems. The company, founded in 1861, is headquartered in Goettingen, Germany.

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Leads 48" W/BAN PLUG BLK BU-2020-A-48-0

Manufacturer: IDI Brand: IDGroup

Contact Probes 101628 Probe

Manufacturer: Fluke Brand: Fluke Model: 4629295

A fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect enabled units.