Oscilloscopes - Page 37

Manufacturer: Pico Brand: Pico

Pico 2205 MSO KIT PicoScope with Analog and Digital Probes Full-Featured oscilloscope The picoScope 2205 mSo from pico technology is a 2+16 channel, 8-bit resolution oscilloscope. this means that along with 2 analog channels, the picoScope 2205 mSo also has 16 digital inputs, so you can view your digital and analog signals simultaneously. The picoScope 2205 mSo is a full-featured oscilloscope. A function generator and arbitrary waveform generator are built in and include a sweep function. it also offers mask limit testing, math and reference channels, advanced digital triggering, serial decoding, automatic measurements and color persistence display. Triggering The picoScope 2205 mSo offers a comprehensive set of advanced digital triggers including: pulse width, windowed and dropout triggers to help you capture the data you need. Digital triggering reduces timing errors and allows our oscilloscopes to trigger on the smallest signals, even at the full bandwidth. trigger levels and hysteresis can be set with high resolution. Digital triggering reduces rearm delay and, combined with the segmented memory, allows the triggering and capture of events that happen in rapid sequence. the mask limit testing function can then scan through these waveforms to highlight failed waveforms for viewing in the waveform buffer. The 16 digital inputs can be displayed individually or in arbitrary groups labelled with binary, decimal or hexadecimal values. A separate logic threshold from -5 V to +5 V can be defined for each 8-bit input port. the digital trigger can be activated by any bit pattern combined with an optional transition on any single input. Advanced logic triggers can be set on either the analog or digital input channels, or both. Selecting digital channels, or groups Selecting the digital channels in the software couldn't be easier. Just open the user interface, and then drag and drop to add the channels you want to see

Manufacturer: LeCroy Brand: LeCroy

Manufacturer: GW Instek Brand: GW Instek Model: GOS-620FG

The Instek GOS-620FG is a 20MHz, two-channel analog oscilloscope with a built-in function generator, ALT triggering, Z-axis input, TV synchronization capability, and channel 1 output for electronics applications such as production lines and electrical engineering education, among others. The function generator produces sine, square and triangle waveforms with a frequency from 0.1Hz to 1MHz for testing circuits. This oscilloscope has a vertical sensitivity to 1mV per division for capturing low-level signals. An ALT triggering function displays the signal from both channels simultaneously. The Z-axis input modulates the intensity of the waveform, the TV synchronization circuit allows triggering of TV-V and TV-H signals, and the channel 1 output can apply a signal to an external device, such as a frequency counter (sold separately). Additional specifications include a rise time of 17.5ns and various triggering features. The oscilloscope has a 6" CRT (cathode ray tube) display with an internal 8 x 10 division grid (each division is 1 cm) for viewing waveforms. It has European Conformity (CE) marking. It comes with two 20MHz passive voltage probes, a power cord for 115/230VAC, 50/60Hz, and a user manual. SpecificationsDisplay6" CRTBandwidth20MHzChannelsTwoFunction generator waveformsSine, square, triangleFunction generator frequency range0.1Hz to 1MHzRise time17.5nsSweep time0.2μs to 0.5s per divisionStandard metCE markingPower sourcePower cord for 115/230VAC, 50/60HzDimensions (H x W x D)150 x 310 x 455 mmWeightApproximately 8.5 kgH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Oscilloscopes are electrical testing devices used to verify the functionality of equipment that generates an electrical signal. Oscilloscopes measure the voltage of an electrical signal over time, and display the measurement as a waveform in a visual graph. The waveform shows the sweeps (or refresh) of voltage on...

Manufacturer: TENMA Brand: Tenma Model: 72-10175

Bandwidth: 60MHz. Bandwidth: 60MHz. Input Impedance: 1Mohm. Input Impedance: 1Mohm. Meter Display Type: -. Meter Display Type: -. Plug Type: -. Plug Type: -. Rise Time: 5. 8ns. Rise Time: 5. 8ns. SVHC: To Be Advised. Sampling Rate: 200MSPS. Sampling Rate: 200MSPS. Scope Channels: 4 Analogue. Scope Channels: 4 Analogue. Scope Type: PC Based. Scope Type: PC Based. Series: -. Series: (Not Ava

Manufacturer: Hioki Brand: Hioki

Easily Connect to Hioki Memory HiCorders and HiLoggers for High Voltage Testing The P9000 is a differential probe used to measure high voltage with Hioki Memory HiCorders. Note: This product is used by connecting it to the analog inputs on a Memory HiCorder. It requires an AC adapter, USB bus power, or other power supply to operate.

Manufacturer: Rigol Brand: Rigol

Rigol S1210 EMI Pre-Compliance Test PC Software Licence   ×   Introduce the workspace concept; manage multiple measurements Support the demo mode for you to enjoy a great user experience with the software, without connecting the instrument or obtaining a license Provide data manager function for you to edit required files for the software The Rigol S1210 EMI Pre-compliance Software is a PC application software developed by RIGOL for DSA1000A, DSA1000, DSA800 and DSA800E (with the EMI-DSA800 option) with the EMI function. This software is designed on the basis of the standard drive VISA and you can realize the communication between the software and instrument via USB-TMC or LAN interface to control the instrument. You can perform conduction and radiation tests using S1210 EMI Pre-compliance Software and RIGOL DSA series spectrum analyzer. You can measure the interference voltage on the power cable using the linear impedance stability network (LISN) and perform amplitude correction on the results by loading the correction factor (preamplifier, attenuator, antenna, cable, or correction array) automatically in the radiation test. This software also provides various functions to facilitate your measurements. You can set various parameters (such as the frequency range, resolution bandwidth, and scan time) via the scan table. After performing a scan, the results can be displayed in log or linear format. You can search for signal peak value and view the results displayed in the peak table. Besides, you can mark and delete the undesired signal, as well as easily recognize signals that do not pass the standard limit line. The software also supports the marker table

Manufacturer: TEKTRONIX Brand: Tektronix

Tektronix TBS1052B-EDU Oscilloscope As the world's first dedicated teaching oscilloscope, the TBS1000B-EDU Series is designed specifically to make oscilloscope-based teaching and learning more effective than ever before. An innovative new courseware eco-system lets educators create and seamlessly integrate teaching materials and present information directly on the oscilloscope display to provide step-by-step instructions, background theory, hints and tips or an efficient way for students to document their lab work. You can even share lab experiments and ideas with other academicians via a Tektronix-hosted courseware web page. Password control enables or disables the Autoset function to help students gain more insights into oscilloscope fundamentals instead of allowing them to take shortcuts. Standard features include a best-in-class, always-on sampling rate up to 2 GS/S on both analog channels; 34 automated measurements; 2.5k points record length; FFT analysis; advanced triggering; built-in dual-channel HW-based frequency counter; new DPO-style user interface with zoom function; context-sensitive help menu; USB connectivity; and 7" WVGA high-resolution display. Includes: (2) TPP0051 Passive Probes, Calibration Certificate, User Manuals, Documentation CD, Education CD, and power cord. 5-year Warranty. Specifications: Bandwidth: 50 MHz Channels: 2 Sample Rate per Channel: 1.0 GS/s

Manufacturer: Hioki Brand: Hioki

Sensor Extension Cable for CM7290 20m.

Manufacturer: JYE Tech Brand: JYETech

DSO 068 DIY kit uses through-hole components as much as it can. This makes the scope unique among peers. With through-hole components the kit eases off the requirement of assembly skills and at the same time allows deeper user involvement. Most importantly it brings in the freedom for users to test, modify, experiment, and even design their own projects. And this means more fun! More over, DSO 068 is not just a kit for training but also a practical tool for everyday use. It was designed on the base of DSO 062 kit and comprises many enhancements in hardware and firmware. Major improvements include: Higher sensitivity (10mV/div vs 100mV/div) Wider analog bandwidth (3MHz vs 1MHz) Larger capture buffer (1024 points vs 256 points) Variable trigger position (1% - 100%) with indicator Test signal generator with variable frequency and amplitude USB connection Upload of captured raw data as CSV file [ Example ] Work as USB scope (with jyeLab) and data logger (8 channels, 10-bit resolution) Higher sensitivity (0.2Vpp vs 3Vpp) in built-in frequecy meter Battery/USB powered (Battery not included. USB Cable not included) Fully enclosures Operations of DSO 068 are even easier thanks to silicone pushbuttons and rotary encoder. Parameter setting is simply, straightforward, and quick. Mode switch and utilities are driven by menu. Absolutely no complicate navigation. This kit is particularly suitable for educational use. It is a great tool for college students. Soldering and assembly required.

Manufacturer: SainSmart Brand: SainSmart Model: DDS-120

Overview: SainSmart DDS-120 is a medium-performance oscilloscope. The highlighting advantage is the high performance price ratio. When you do not want to spend a high price to buy a traditional oscilloscope, this product will be a good choice. DDS-120 takes operation of traditional oscilloscope operation and part function of display transfer drawing into the computer by the software to achieve. As long as the DDS-120 via USB cable into your compute, it will form a complete oscilloscope test system after running the software. Features: • Computer USB supply power directly • Support XP~Win10 series of operating system • Waveform recording and continuous playback as well as specified frame playback functions by frame-by-frame • Input channel arithmetic and FFT analysis • Anti-aliasing features of waveform drawing to reduce rendering errors further • Memory unction of user personalization settings • The rapid completion of the mouse to control the trigger function settings • Optional colors of black and white pattern to create reports document screenshot Applications: • Site engineer travel to debug • Electronics Engineer develop tools • AE engineers diagnose equipment and solve the problem for customer on-site • The ideal partner of electronic enthusiasts for their amateur making • Fault diagnosis equipment for repair personnel Demonstration Teaching Laboratory aids of colleges • Automatic test equipment for production Download: http://s3.amazonaws.com/s3.image.smart/download/101-10-143.rar Note:Please manually install the driver from XP folder for Win10