Logic Analyzers - Page 5

Manufacturer: BOSCH AUTOMOTIVE SERVICE SOLUTIONS Brand: BOSCH

Gm Hi-Volume Ecm Anlyzr Set.

Manufacturer: Linkinstruments Brand: Link Instruments

As a logic analyzer the IO-3208A topping out at 200Msa/s, the IO-3208A records at a blistering rate of 6.4Gbs/s into its deep 256Kpt buffer. Event resolution of 5ns can easily be analyzed. But what makes it so special is the integrated 8 ch Pattern Generator. The Pattern Generator is capable of clocking data out at the same furious rate as the Logic Analyzer. Precise sample to sample Input to output switching means that the IO-3208A can inject and listen to data on your bus. For ASIC designers, the IO-3208A offers a low cost solution to ASIC validation. For FPGA designers, you will no longer need to allocate precious logic and routing resources to soft logic analyzers. Timing closure can be achieved with a smaller device, just think of the cost saving in that! For embedded designers, external peripheral functions can be simulated using the Pattern Generator, which will greatly optimize your design workflow. For designers that need mostly logic analysis and occasional pattern generation, the IO-3208A offers an attractive lower cost option. Max sample rate: 200 MSa/s (internal), 200 Mhz (external) Channels: 32 (Logic Analyzer) + 8 (Pattern Generator) Buffer size: 256 KPt/channel Package contents: IO-3208A main unit, 4 wire harnesses, 11 clips, USB cable, CD

Manufacturer: Vizio Brand: ShopJimmy Model: EEPROM-E550VL-3655-0152-0150

IMPORTANT: These main boards can have multiple failures, in addition to the EEPROM. If EEPROM replacement does not repair your board, there are likely additional problems. Symptoms EEPROM replacement CAN fix: - Display is frozen on VIZIO logo screen - TV turns on when first plugged-in, but it won't turn back on after 30 minutes of being off - TV shuts off and goes back to standby mode (orange VIZIO lit) after you turn it on Symptoms EEPROM replacement CAN NOT Fix: - TV turns on but has NO backlight - TV turns on AND backlights are on, but has no video display at all - HDMI issues - Audio issues

Manufacturer: Vizio Brand: ShopJimmy Model: EEPROM-E421VL-3642-1242-0150

IMPORTANT: These main boards can have multiple failures, in addition to the EEPROM. If EEPROM replacement does not repair your board, there are likely additional problems. Symptoms EEPROM replacement MAY fix: - On screen display is stuck on logo screen - TV wonÆ’??t power on with remote or buttons (LED indicator remains same color) - TV wonÆ’??t turn on after being off for 30+ minutes - TV shuts off by itself during channel scan or when switching inputs - TV turns on and is stuck in color test pattern mode forever - TV turns on but there is no backlight (LED indicator shows TV is on but there is no image)

Manufacturer: RCA Brand: ShopJimmy Model: EEPROM-V390HJ1-L02-E12080184

IMPORTANT: These main boards can have multiple failures, in addition to the EEPROM. If EEPROM replacement does not repair your board, there are likely additional problems. Symptoms EEPROM replacement CAN fix: - TV won't power on with remote/buttons when plugged-in Symptoms EEPROM replacement CAN NOT Fix: - TV turns on but has NO backlight - TV turns on AND backlights are on, but has no video display at all - HDMI issues - Audio issues

Manufacturer: MF Brand: Man Friday Model: -

1PCS USB Logic Analyzer Device Set 24MHz 8CH MCU ARM Debug ToolDescription : Crystal +/-20ppm, 24MHz Input low voltage -0.5V to 0.8V Input high voltage 2.0V to 5.25V Input voltage range -0.5V to 5.25V Works with 5V, 3.3V, 2.5V, 2.0V systems,May work with 1.8V but not recommended Input Impedance 1Mohm || 10pF (typical, approximate) Error/accuracy pulse-width measurement: +/- 42ns (at 24MHz) Channel sampling rate 24M/s. General applications around 10M Sampling rate up to 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz Feature This logic analyser contains generic Cypress CY7C68013A microcontroller based hardware.It is re-programmable so that quite flexible in what you can do with it. By default its USB interface is programmed with a VID (Vendor ID) & PID (Product ID) identification which makes it appear as a logic analyser and therefore will work with this software out of the box. However the VID & PID can be changed to anything you want which can allow it to work with other software such as USB. Package Included :1 x usb cable 10 x dupont line 1 x analyser deviceDetail Pictures : Thank you for surfing our website. Welcome your kindly suggestion and your product requirements,we will provide our best service for you.

Manufacturer: BANNER Brand: BANNER Model: 45LM5D

Banner 45Lm5d Logic Module Delay Logic Plus Signal Strength Display 15 Sec. Max

Manufacturer: SeeedStudio Brand: Seeedstudio Model: 109990064

LA1016 is a high-performance logic analyzer with 16 channels and 100M sampling rate. It is composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc.LA1016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved. Features: - Portable and lightweight- 100M sampling rate @ full channels- Large sampling depth and support compression- The built-in PWM generator- Compatible USB2.0/3.0 interface- Powerful software and easy to use- Support online upgrade automaticallySpecification: - Input channels number: 16- Max sampling rate: 100M- Measurement bandwidth: 20M- Min pulse width can be captured: 20ns- Hardware memory size: 1Gbits- Hardware sampling depth: 50M/channel- Max compressed depth: 10G/channel- Input voltage range: -50V ~ +50V- Input impedance: 220K¦¸, 12pF- Threshold voltage: low level < 0.8V, high level > 1.6V- PWM channels number: 2- PWM frequency range: 0.1 ~ 20MHz- PWM frequency adjust step: 10ns- PWM pulse width adjust step: 5ns- PWM output voltage: +3.3V- PWM output impedance: 50¦¸- Standby current: 130mA- Max operating current: 260mA- Dimensions: 95mm * 55mm * 23mm- Support OS: Windows XP, Vista, Windows 7/8(32bit/64bit)- Support standard protocols: UART(RS-232/485/422), I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, Simple Parallel, PS/2 Keyboard/Mouse, UNI/O, USB1.1

Manufacturer: Balance World Inc Brand: Balance World Inc

Max Samplerate: 400MHz @ 4 Channels 200MHz @ 8 Channels 100MHz @ 16 Channels Max Sample Depth: 1G(stream mode)/16M(buffer mode) Adjustable Threshold: 0 ~ 5V (Continuous) Advanced Trigger: 16 stages Protected Voltage : ±30 V (DC+AC peak) Input Characteristics: 250KΩ // ~7 pF Input Channel Analog Bandwidth: 50MHz Max State Clock Input: 50MHz Part List: DSLogic Pro core module: x1 USB cable: x1 Shielded wire bundles: x1 Clips for logic analyzer: x16

Manufacturer: Logic Controls Brand: Logic Controls

eNet KDS Bundle (LS6000 KB1700 Bump Bar XPIENT LEGEND Cables)