Multi Testers - Page 32

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 22983 Color: Red/Yellow/Blue

45° end for easy installation in tight areas gaskets resist deterioration from existing cfc, hcfc and hfc refrigerants and oils available with sealright fittings on both ends UL recognized assemblies (file Sa9737) made in the USA low loss anti-blow back sealright fitting immediately traps refrigerant in the hose when disconnected, helping meet non-venting regulations.

Manufacturer: Standard Plumbing Supply Brand: Fieldpiece Model: LT83A Color: Multicolored

The LT83A is a basic classic style multimeter at a great price. It's a manual ranging meter that includes common HVAC/R electrical parameters. Add our optional detachable test lead set, and the LT83A works with our accessory heads to test non-electrical parameters too. The LT83A meter measures voltage, resistance, amps, continuity and more. Test leads store in the meter body along with the tilt stand and magnetic hanger. The body is constructed of durable ABS plastic and a blue backlight makes the large LCD even more visible. It's a good, solid meter and a real value.

Manufacturer: INNOVA Brand: Innova Model: 3347

The INNOVA Digital Multimeter AMP Probe is ideal for testing alternator output, starter and battery current draw as well as all other electrical wiring circuits. The red/green indicator light shows power and low battery. Features 2-foot test lead, slide switch for measurement selection and zero adjuster for calibration. Designed to work with all Digital Multimeters.

Manufacturer: Dr.meter Brand: Dr.Meter

The newly released Dr.meter MS8268 is an auto/manual ranging digital multimeter. It is packed with many nice features such as sound and light warning for the jacks and back-lit LCD Screen. This meter powers on three AAA batteries. Accessories include test leads & user Manual Technical Details AC/DC 1000V/10A 200KHz 200uF 40Mohm Relative Measurement hFE Diode Check Continuity LED / Sound Warning when incorrect banana jacks are used relative to function switch setting Auto and Manual Ranging with Relative measurement (all ranges except frequency) All range fused (resettable) with 1 Year Warranty Auto power off (could be disabled) & Blue LED Back-lit LCD display

Manufacturer: Pro'sKit Brand: Pro'sKit Model: MT-7062

The MT-7062 HDMI cable tester allows the fast and accurate verification of both HDMI type A and Type C cables, mapping continuity and proper configuration and displays 19 pins and shield connection status on both main and remote unit. For HDMI cables Type A, C Test all HDMI cables with Type A to A, A to C and C to C connectors, especially for fragile, easily damaged HDMI patch cord and in-wall HDMI cables. Loopback function Designed with loopback function allows test HDMI type A to A, A to C on main unit. 3 Test Modes • Automatically fast scan for testing all conductors status in a cable • Automatically slow scan for testing all conductor's satatus in a cable • Manual test for step by step detecting individual conductors for intermittent faults. HDMI Cable Mapping Automatically detect wiring on HDMI type A or type C condition in straight、short、open、crossover in all RGB conductors Troubleshooting Quickly troubleshoot and verify HDTV installation and DIY termination in the field.

Manufacturer: Bacharach Brand: Bacharach Model: 0011-7029

Accuracy is within 0.5% CO2 or 02. Test gases up to 850 Degree Fahrenheit. Replacement part for Pyrite CO2 and O2 Testing Kit. Image shown may NOT be accurate - Some show devices instead of parts; This is a PART, not the whole device. .

Manufacturer: ICM Controls Brand: ICM Controls Model: ICM281 Color: Multicolored

Furnace Control - replacement for OEM models including Carrier CES0110057-xx series control boards.

Manufacturer: SainSmart Brand: SainSmart

* Panel Type: TFT * Interface Type: Digital * The number of wiring: 50 PIN Digital (TTL) TCON

Manufacturer: Honeywell Brand: Honeywell Model: UC100E1006 Color: White

Original Factory Replacement (UC100E1006) UV Bulb for Honeywell UV Germicidal Lamp - 18 Watt SnapLamp knob and bulb assembly.  With this knob/lamp assembly, future lamp replacement will require only the new lamp (UC18W1004) as the lamp itself is removeable. Fits:Model UV100E1043 Single-Lamp Reurn Air Unit.   Older Model UV100A1000 Return Air UnitReplaces UC100A1005 - (same bulb, blue handle rather than tan).  Overall bulb length is 8½ inches, glass length measures 7½ inches. The bulb has has two glass tubes fused together and two filaments, each tube is ¾" in diameter.

Manufacturer: Shenzhenshi Kelushi Keji Youxiangongsi Brand: KELUSHI

APM820 Optical Power Meter Features User self calibration function Comfortable LCD display and optional backlight LCD display supports night operation Power measurements in dBm or mw and insertion loss in dB Low battery consumption, more than 150 hours continual operation time for two 1.5V alkaline batteries Optional 10 minutes Auto-off function Specifications 1) Insertion loss test in dB 2) Wide measuremen range High resolution: 0.01dB; Good accuracy:±0.2dB; 3) Insertion loss test in dB; 4) SM or MM applications 5) 2.5mm universal and FC, SC, ST, LC; 6) 850/1300/1310/1490/1550/1625nm calibrated wavelengths; 7) APM820 is for telecom testing, APM830 is for CATV testing; 8) Energy save mode: about 10 minutes no operation will cause the device automatic power off (can be cancelled); 9) Reference value storage; 10) Full energy can support above 150hours operation Fiber Optic Cable Tester Output optical power:>10mW Output distance:10 kilometers Output wavelength:650+-10nm Fiber Adapter：2.5mm universal and FC, SC, ST, LC Operating temperature：-20℃~60℃ Storage temperature:-40℃~85℃ Type of battery:2 X AAA alkaline batteries Fiber category:SM，MM product weight:120g Application Telecom Maintenance CCTV Maintenance Comprehensive cable construction system Optical instruments research and development Optical communication education and lab testing Other optical project