Multi Testers - Page 42

Manufacturer: Fluke Corporation Brand: Fluke Model: 59Max+

The Fluke 59 Series Infrared Thermometer is designed to provide precise laser technology for more accurate and repeatable measurements. It has a large, easy-to-read backlit LCD display for easy viewing. It is small and lightweight design fits easily fits into your tool box. It displays the minimum, maximum or average temperature, or the difference between two measurements. It has Hi and Lo alarms for rapid display of measurements outside the limits. It is powered by one (1) AA battery, and comes with a one year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: TL970

Kit includes 1 mini-hook test lead set, 1 mini-pincer test lead set, 1 micro-hook test lead set. 1 Year warranty.

Manufacturer: Northern Laboratories Brand: Formula 1

CARNAUBA PASTE WAX 12OZ

Manufacturer: TENMARS Brand: Tenmars Model: TM-191

Display 3-1/2 digits LCD, maximum reading 1999 Range 200/2000 mG,20/200μT Resolution 0.1/1 mG or 0.01/0.1 μT Frequency response 30Hz to 300Hz Sensor Single Axis Accuracy ± (2.5%+6dgt) at 50Hz/60Hz Over load LCD display "OL" Sample rate 2.5 times per second Battery 9V NEDA 1604, IEC 6F22 or JIS 006P Battery life Approximate 100 hours Operating temperature & humidity 5℃ to 40℃,below 80% RH Storage temperature & humidity -10℃ to 60℃, below 70% Weight About 170g Dimensions 130(L)*56(W)*38(H)mm Accessories User's manual, 9V battery, Carrying case

Manufacturer: Shenzhenshi Kelushi Keji Youxiangongsi Brand: KELUSHI

Model name:10mW visual fault locator Universally connector for test different ST,SC,FC interfaces Test for both single-mode and multi-mode cables with optional 2.5mm fiber optic(Standard) connectors to 1.25mm adapter(Optional) High effective power circuits allow for stable power Fiber Optic Cleaver FC-6S: Coating Diameter: 0.25mm - 0.9mm (Single) Cladding Diameter: 0.125mm Cleave Length:9mm - 16mm (Single Fiber - 0.25mm coating) 10mm - 16mm (Single Fiber - 0.9mm coating) Typical Cleave Angle: 0.5 Degrees Typical Blade Life: 36,000 Fiber Cleaves Number of Steps for Cleave: 2 Blade Adjustments Rotational & Height Note:the FC-6S fiber cleaver is only used for cold connector,can not used with the fiber splicer. CFS-2 Plier: 250 μm coated fiber of 125 μm fiber Opening at the top of 1.98mm can be used for stripping fiber outer The jaw factory has been adjusted, shall not be adjusted Will not damage optical fiber green fiber stripping tool: Universal Stripper for 3.1x2.0mm FTTH drop cables with steel wire or FRP strength member. Made of zinc alloy steel with PVC non-slip handle. Improve cable splicing, more efficient and easy to use. kit include: 1.small fiber tool bag 2.grey optical power meter(-70~+10dBm) 3.Visual Fault Locator VFL-10 4.FC-6S fiber cleaver 5.Fiber Optic Stripper Clauss CFS-2 6.green fiber stripping tool 7.alcohol bottle 8.other fiber accessories.About the service:If you have any questions, please do not hesitate to contact us.

Manufacturer: SainSonic Brand: SainSonic Model: 20mw+ OP-600

SainSonic WattsOut OP-600 miniature handheld optical power meter is for installation, operation and maintenance of optical fiber network special design of a precise, durable, convenient portable test instrument. With clever appearance, can choose to switch back light display, automatic shutdown function, super wide optical power test range, accurate testing accuracy and new users auto-calibration function and general interface design. Features * Wavelength(nm): 800nm to 1700nm * High sensitivity, big dynamic range * Common interface design: FC/SC/ST interface, with standard FC, SC adapter interface * Miniature chassis protection design, compact and easy, prevent accident drop damage instrument detectors. * Rapid response, no preheating * Low voltage function display * The automatic shutdown function can be chosen * Automatically shut off the backlight function can be chosen * New user auto-calibration function * Logarithm power (dBm) and linear power (xW) measurement * Larger screen and LED backlit The 20mW visual fault locator is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement. Specifications * Wavelength: 650nm ± 20nm * Output Power: >20mW * Dynamic Distance: >18km * Connector: 2.5mm Universal connector * Packaging Size: 210*73*30 * Weight: 150g * Power Supply: AA * 2 * Operating Temperature: -10 -- +50 °C, < 90%RH * Storage Temperature: 20 -- +60 °C, < 90%RH Package Content 1 x 20mW Pen-type Visual Fault Finder 1 x Carrying Bag 1 x Power Meter 1 x Carrying case 1 x ST,FC,SC connector 1 x English manual 1 x Power Meter 1 x Carrying case 1 x ST,FC,SC connector 1 x English manual 　

Manufacturer: Reed Brand: REED Instruments Model: ST-335

Resistance to 40 megaohm. Temperature range to 2372 degree F (1300 degree C). Capacitance to 100 microF. EN 61010-1 CAT 600V. Complete with test leads, type K thermocouple wire probe, batteries and carrying case. Specifications: AC current range: 400.0, 4000 microA, 4.000, 40.00, 400.0A. AC voltage range: 400.0mV, 4.000, 40.00, 400.0, 600V. DC voltage range: 200.0mV, 2.000, 20.00, 200.0, 600V. Resistance range: 400.0 ohm, 4.000, 40.00, 400.0 kohm, 4.000, 40.00 megaohm. Capacitance range: 40.00, 400.0nF, 4.000, 40.00, 100.0 microF. Frequency range: 5.000, 50.00, 500.0Hz, 5.000, 50.00, 150.0kHz. Temperature range: -58 to 2372 degree F (-50 to 1300 degree C). Duty cycle: 0.5 to 99.0 percent. Power supply: 2 x "AAA" 1.5V batteries. Jaw opening: 0.9" (23mm). Measures 8-3/32" length by 2-3/4" width by 1-1/2" depth.

Manufacturer: Mastercool Brand: Mastercool Model: 62010 Color: Gray/Yellow

30 lb. Refrigerant Recovery Tank without Float Switch and 1/4" FL-M (7/16-20) Powder coated cylinder for high gloss, durable finish. Y-valve for liquid/vapor. 3/4” NPT opening accepts 80% fill float switch shut-off device. 1/4” opening for air purge valve. Collar design for ease of handling. Reusable and conforms to DOT-4BA400 specifications and ARI guidelines. Pre-charged cylinder provides a clean, dry interior. Storage and transport of recovered refrigerant gases. Valve & Float Switch UL Listed. AUS Approved and TC Canadian Approved. Specifications: • Size (w x h): 9.125"" x 17.52" • Tare Weight: 17.99 lb. • Standard Specification: DOT-4BA400 • Nominal Water Capacity: 26.2 lb. / 11.9 L • Service Pressure: 400 PSI / 2.7 MPa • Tank Test Pressure: 800 PSI / 5.5 MPa • Relief Valve Pressure: 600 PSI / 4.1 MPa • Air Tightness Pressure: 400 PSI / 2.7 MPa • Body Material: HP295

Manufacturer: Psiber Brand: Psiber

CT12 High Power CableTracker Toner.   Activate link lights to identify a connected hub or switch port Transmits four audible tones RJ-45 male or female connection Detachable DMM alligator clips Detects short or open circuits Low Battery Indicator   Psiber CT12 High Power CableTracker Toner   CableTracker CT12 The most powerful Tone Generator available A Tone Generator for Network Testing Traditional Tone Generators were designed for one primary mission; to identify the termination point of a cable. Unfortunately, these were designed for telephony, not network maintenance. Why else would they have RJ-11 plugs? The CT10 incorporates 3 link light activation speeds to easily identify user cable termination ports by simply looking for the blinking lights. Why three? Because ethernet switches do not react the same to activation. Three speeds ensures the widest compatibility available. Easy Cable Connection The CableTracker CT10 is designed to accommodate both Ethernet and telephony cabling. Simply connect to the LAN with either the female RJ-45 jack or directly to the wallplate with the included RJ-45 patch cord. The Cabletracker CT10 even provides alligator clips for punch down blocks or non-terminated cables. Up to 10 times more powerful Trace tone signals on high performance twisted pair, coaxial and even shielded cables. The CableTracker 12 Ultra High Power Tone Generator is up to 10 times more powerful than other generators. The CableTracker's incredible 190mW power output helps to quickly and accurately solve the most difficult cabling installation and maintenance jobs. Simple to Use "ON" transmits the tone signals continuously until the operator turns the unit off. "AUTO" transmits the tone signals for approximately 12 minutes and then shuts down to conserve battery life

Manufacturer: Greenlee Brand: Greenlee Model: DM-200A

FEATURES:• Auto and Manual Ranging• Non-contact and single-probe voltage detection• Beep-JackTM audible and visible warning to guard against improper A and mA terminal plug in.• High visibility 6000 count LCD display• Auto power off, display backlight, analog bar graph• PC interface capability using optional USB RS-232 cable with  data recording PC software.• Lifetime Limited Warranty.SPECIFICATIONS:• Voltage Measurement: 60mV to 1000V AC/DC• Amperage Measurement: 600mA to 8A AC/DC• Resistance: 600Ω to 60MΩ•Frequency (Hz): 50 ~ 400• Measurement Category: Cat IV, 300V; Cat III 600V, Cat II 1000V