Multi Testers - Page 7

Manufacturer: UEi Brand: UEi Test Instruments Model: PSMR1 Color: Multicolored

The PSMR1 combines a 3-phase sequence indicator and a motor rotation tester. The PSMR1 is designed to help professionals ensure the proper installation of conveyors, pumps, and other electrical devices. Bright, easy-to-read indicators help identify open phases and indicate the sequence of connected lines. The motor rotation indicator provides information about the direction the motor will turn when connected to a 3-phase supply. Saftey rated to CAT III 600V and tested to meet IEC1010.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98301

DiST's are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS. The DiST family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry. This tester features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of TDS is based on Ohm's Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiST's non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results. When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester. Range: 1999 ppm ( milligrams per liter). Resolution: 1 ppm ( milligrams per liter). Accuracy: +/-2 percent F.S. TDS Factor: 0.5. Calibration Solution: HI70442. Calibration: manual, 1 point. Probe: HI73301. Temperature Compensation: automatic, 0 to 50 degree C (32 to 122 degree F). Battery Type/Life: 1.5V (4)/approximate 200 hours of continuous use. Environment: 0 to 50 degree C (32 to 122 degree F); RH max 95 percent. Weight: 3.4 oz. Measures 1-19/32" length by -57/64" width by 6-57/64" height.

Manufacturer: Amprobe Brand: Amprobe Model: IR608A Color: Red

The Amprobe IR608A infrared thermometer with laser pointer is designed to measure temperature in a variety of HVAC, electrical, automotive, industrial maintenance, quality control, and fire prevention applications. The meter has a 8:1 distance-to-spot (D:S) ratio, and fixed emissivity (0.95). A single laser pointer helps ensure more accurate targeting, and a back-lit LED screen assists reading in low-light areas. Dual-scale temperature readings range from 0 to 750 degrees F (-18 to 400 degrees C), with a resolution of 0.5 degrees F (0.2 degrees C). The device operates on one 9V battery, which provides approximately 12 hours of use. Specifications Accuracy + or - 2 percent of reading, or + or - 3.5 degrees F (2 degrees C), whichever is greater Repeatability + or - 0.5 percent of reading, or + or - 1 degree C, whichever is greater Spectral response 7 to 18 microns Laser sighting and power Single-point laser with output greater than 1 milliwatt Class 2, wavelength is 630 to 670 nanometers Response time (95%) 500 milliseconds Operating temperature 32 to 104 degrees F (0 to 40 degrees C), at less than 75 percent relative humidity (non-condensing) Storage temperature (with battery removed) -4 to 140 degrees F (-20 to 60 degrees C) Dimensions Approximately 6 x 4 x 1.5 inches (152 x 101 x 38 mm) (H x W x D) Weight Approximately 05 lb. (227g) Safety compliance EN 61010-1, EN 60825-1 EMC compliance EN 61326-1 H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Thermometers are used to measure temperature for various applications such as education, general purpose Quality Control (QC) labs and research lab testing, and for biological process monitoring.Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WAWhat’s in the Box?...

Manufacturer: Simpson Brand: Simpson

The Simpson 00248 Carrying Case Color Black, For Use with Mfr. 260 Series, Features Rolltop.

Manufacturer: ICP Heil Tempstar Sears Kenmore Brand: ICP Heil Tempstar Sears Kenmore Color: Multicolored

Replaces: ICP 1010238P ICP 1010324 ICP 1013833 Mars 10705 ICP 1708-607 ICP 1708-607P ICP 1708607 Emerson 3111 ICP 4MH28 Fasco 7021-10275 Fasco 7021-7700 Fasco 7021-8735 Fasco 7021-8736 Fasco 7021-9335 Fasco 7021-9477 Fasco 7021-9918 Rotom FB-RFB833 ICP J238-1393 Jakel J238-1393

Manufacturer: BILUSOCN Brand: BILUSOCN Model: 1M-250

This is an electric match. They burn very hot as they are intended to ignite professional fireworks and used in pyrotechnics shows. Can be set off by almost any DC power source from flash light batteries, watch batteries, to car batteries. They also work well for emergency/survival fire starters because they are wind and waterproof, burning hot enough to light most tinder and kindling material. Are an excellent replacement for copper model rocket engine igniters. This is for 250 units. Pre-Spliced lead wires and safety caps.

Manufacturer: Janisa Brand: Janisa Model: PM18 Color: Black Orange

Overview: The Janisa PM18 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is an ideal muti-functional meter. Features:  1.The design for the meter shows a great deal of originality 2.Backlit LCD with large digits and the flashlight on the back for visibility in dimly lit areas  3.The non_contact voltage indicator makes the dangerous visible  4.Displays results quickly with 2-3 readings per second update speed  5.Provide display up to 6000 counts Specifications: DC Voltage Range snd Accuracy: 600mV/6V/60V/600V ±(0.5%+3), 1000V ±(0.5%+3) AC Voltage Range snd Accuracy: 6V/60V ±(0.8%+3), 600V/750V ±(1%+10) DC Current Range snd Accuracy: 60μA/60mA/600mA ±(0.8%+3), 20.00A ±(1.2%+3) AC Current Range snd Accuracy:60mA/600mA ±(1%+3), 20A ±(1.5%+3) Resistance Range snd Accuracy: 600Ω/6KΩ/60KΩ/600KΩ/6MΩ ±(0.8%+3), 60MΩ ±(1.2%+3) Capacitance Range snd Accuracy: 6nf/60nf/600nf/6uf/60uf/600uf/6MF ±4.0%+360MF ±5.0%+3 Frequency Range snd Accuracy: 0/600/6k/60k600k/6m/10Mhz ±1.0%+3 Display: 6000 counts Data hold: √ Back light: √ Auto power off:√ Diode test: √ Triode test: √ Continuity: √ Transistor:√  Live Line testing:√ Over load protection:√ Short-circuit protection:√  General Specifications: Power Supply: 4 x 1.5V AA Battery (Included) Dimensions: 7.6 x 3.62 x 2.17 inch Safety Rating: CE, EN61010-1-2-030 CAT III 1000V CAT IV 600V EN61010-2-033, ROHS  Package Includes:  1 x Janisa PM18 Digital Multimeter  1 x Test Leads (1 pair)  1 x User's Manual 4 x 1.5V AA Battery NOTE:Please read relevant informations carefully and observe all the warnings and notes strictly.

Manufacturer: General Tools & Instruments Brand: General Tools Model: CMM880

Ideal for accurate measuring and monitoring of temperature and humidity in a wide range of professional and industrial applications such as: film processing, printing, hospitals, and laboratories. Includes batteries, protective cap, pocket clip, user's manual and 1-Year Limited Warranty.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Manufacturer: American Standard Brand: Honeywell Model: V8043E1079 Color: Multicolored

This Honeywell V8043E1079 Motorized Low Voltage Normally Closed Zone Valve includes am actuator motor and valve assembly used to manage the run out of hot water and is a 1 inch two-way, straight-through sweat valve with a Cv of 8.

Manufacturer: MASTECH Brand: Mastech Model: A5PL60038

Large Dual LCD Display Resolution: 0.1°C, 0.1°F, 0.1K Built-In Ambient Temperature Compensation Auto Power Off MAX/MIN/AVG and Data Hold USB Interface and Analysis Software ●Measurement range K: -200.0C to +1372C / -328.0F to +2501F ●Measurement range J: -210.0C to +1200C / -346.0F to +2192F ●Measurement range T-250.0C to +400C / -418.0F to +752F ●Measurement range E: -150.0C to +1000C / -238.0F to +1832F ●Measurement range R: 0C to +1767C / 32F to +3212F ●Measurement range S: 0C to +1767C / 32F to +3212F ●Measurement range N: -200.0C to +1300C / -328.0F to +2372F ●Display Resolution: 0.1C / 0.1 F / 0.1K ●Accuracy: K J T E: + / - (0.2% + 0.5C); R,S: +/-(0.2% + 1C); N: +/-(0.2% + 0.5C) Temperature scale: ITS-90 Applicable standards: NIST-175 Package included: • MS6514 bare thermometer machine • 2 x K type temperature probes • Operation Manual • 1 x 9V Battery • Data cable • Software CD