Multi Testers - Page 74

Manufacturer: ARKSEN Brand: ARKSEN Color: Red

The A/C Manifold Gauge Set is designed to test automotive air conditioning systems (using R134A refrigerant only) by comparing the "high side" and "low side" pressure reading to the vehicle manufacturer’s A/C system specifications. This A/C Manifold Gauge Set can be used to test, evacuate and fill automotive air conditioning systems.Feature:Automotive AC A/C Manifold Gauge SetHeavy Duty Aluminum housingIncludes 3 color-coded 5 FT. long service hose with storage attachmentExtra large sight glassQuick disconnect couplers for high/low fittings includedLarge easy-to-grip knobsR134a aluminum manifold is a standard manifold kitThe extra large sight glass is for a visual refrigerant checkThis comprehensive standard manifold kit makes A/C jobs fast and efficientEach coupler have a shut off valve to prevent loss of refrigerantNote: Item is meant to be used with 10+ gallon tanks, if you want to use it for cans, please note that the adapter is not includedSpecificationsApplication: R134A RefrigerantGauge Reading: PSIBurst Pressure: 3000PSIMax Working Pressure: 600PSIBlue Gauge (low): 2-1/2" diameter, 0-120 PSI with 0-40 VACRed Gauge (high): 2-1/2" diameter, 0-500 PSIRed & Blue Hose: ( 1/4" FFL x 60"inch with knurled fittings)Yellow Charging Hose: (1/4" ACME x 60" with knurled fittings)Carrying Case Included: YesPackage IncludeManifold Gauge R134A2 x R134a Couplers AdaptersRed High Side HoseBlue Low Side HoseYellow Service HoseBlow Molded Case

Manufacturer: MegaBrand Brand: MegaBrand Model: 16HDM001-A100HA-06

Main Functions: On/off switch: power on and off H key: hold the reading Zero function: reset the readouts Specification: Range: 0-100HA Resolution: 0.5HA Accuracy: no more than ±1% Power:1.5 cell Working temperature: 0- 40 ℃ Flat cone point: 0.79mm diameter Pressure needle top cone angle: 35° Total measure force: 8.1N Durometer dimension: 3 1/4"L x 2 1/4"W x 1"H Package Content: 1x Digital shore A hardness durometer 1x Plastic box with foam 1x Button cell battery (installed)

Manufacturer: Smart Meter Brand: Smart Meter

Basic Features ■3-3 / 4 digits 4000 count ■0.7% best accuracy ■Range hold ■Auto power off (15min.) ■Low power ohm (input voltage 0.4V) at continuity range ■Power saving design Display : numeral display 4000 Sampling rate : 3 times / sec. AC frequency bandwidth : 40〜400Hz Clip adapter : CL-11, CL-15a Notice: The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.Thanks for your support!

Manufacturer: Amprobe Brand: Amprobe Model: IR-450

The Amprobe IR-450 pocket infrared thermometer is an infrared thermometer for measuring temperature from a distance for use in HVAC/R, fire safety and protection, industrial maintenance, and auto maintenance. The thermometer has a distance-to-spot ratio (D:S) of 8:1 and measures temperature from -30 to 500 degrees C (-22 to 932 degrees F). The unit has an LCD that displays the temperature and degrees C or F. It is safety rated to European Standards (EN) 61010-1 and 60825-1. The thermometer is powered by one AAA battery, which powers the unit for up to 100 hours of tests. The IR-450 is designed for use by auto mechanics, industrial mechanics, fire safety and protection technicians, and HVAC maintenance workers. Specifications Power supply AAA battery (one) Distance-to-spot ratio (D: S) 8:1 Temperature range -30 to 500 degrees C/ -22 to 932 degrees F Weight (including battery) 0.11 lb./1.13kg Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 and 60825-1 Dimensions 3.94 x1.1 4 x 0.79 inches/100 x 29 x 20mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meter choice includes the electrical properties to be measured and the anticipated range of results, and should have a rati...

Manufacturer: Supco Brand: Supco Model: EM20 Color: Multicolored

The Supco EM20 digital vane anemometer measures air velocity in m/s, fpm, knots, mph, km/h, and Beaufort scale, and air temperature in degrees C and F; and has maximum, minimum, and hold functions for analyzing air flow. Maximum and minimum function displays the highest and lowest readings since the meter was powered on or reset, and hold function freezes a reading on the display to aid documentation. The LCD shows velocity and temperature readings simultaneously and a backlight provides visibility in low light. The meter has an auto power-off mode that shuts it down after 20 minutes of non-use to conserve battery life and has a low-battery indicator. It has European Conformity (CE) marking. This anemometer is used for monitoring air flow and temperature in ductwork, spray booths, and exhaust hoods, among other applications. SpecificationsAir velocity range0.4 to 20 m/s; 80 to 4,000 fpm; 0 to 39 knots; 0 to 45 mph; 0 to 72 km/h, 0 to 8 Beaufort scaleAir velocity resolution0.1 m/s; 1 fpmAir velocity accuracy+ or - (2% of reading + 0.3 m/s, + 60 fpm)Air temperature range-10 to +50 degrees C/14 to 122 degrees FOperating environment14 to 122 degrees F at up to 80% relative humidityPower(3) AAA batteries (included)Dimensions (H x W x D)157 x 60 x 30 mm/6.2 x 2.4 x 1.2 inchesWeight180 g/6.3 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other properties. The most common types of anemometer are cup, vane, hot-wire, and Pitot tube. Cup and vane anemometers calculate air velocity based on the number of rotations of the cups or vane. Hot-wire anemometers calcula...

Manufacturer: SainSmart Brand: SainSmart

Overview: SainSmart DMT Digital Multimeter series is a practical tool for electricians, hobbyists, and general household use. DMT100 functions as 3 in 1: datalogger, multimeter and temperature meter. It is easy to operate and have various functions such as ohmmeter, voltmeter, resistance testing, etc. Features:    ● High-quality professional multimeter of the top class with 3 main functions: real-effective value measurement (True RMS, 40-400 Hz), data logger and temperature measurement.    ● Free app for Android smartphones with Bluetooth 4.0 (operating system Android 4.3 or higher)    ● Simultaneous coupling of 2 multimeters is possible    ● Display graphics and tables    ● Recorded data can be saved as ".csv" file    ● Automatic or manual range selection Specification:    ● DC voltage: 0-250V (± 0.8%)    ● Alternating voltage: 0-250 V (± 1%)    ● DC: 0-20 A (± 1.2%)    ● Alternating current: 0- 20 A (± 2%)    ● Resistance: 0-60 MΩ (± 2%)    ● Capacitance: 0-4000 μF (± 3%)    ● Frequency: 10 Hz-10 MHz (± 0.8%)    ● Temperature: -50 to + 400 ° C (± 2.5%)    ● Duty Cycle: 0.1- 99.9% (± 2.5%)    ● 3 5/6-digit display with 22 mm digit height    ● Analog bar graph (61 segments)    ● Max / Min values    ● Data Hold function    ● Auto-off function    ● "Low Battery" indicator    ● Operation with 2 AA batteries (not included) Pack List:    ● 1x Multimeter    ● 2x Measuring test leads    ● 1x Instructions

Manufacturer: China Brand: UNI-T UT58E Modern Manual Range Digital Multimeter Model: UNI-T UT58E Modern Manual Range

UNI-T UT58E Modern Manual Range Digital Multimeters w/ Frequency Temperature test

Manufacturer: ProGrip Brand: Progrip

TIE-DOWN RATCHET 1.5X16

Manufacturer: General Tools Brand: General Tools Model: SAM990DW

General Tools SAM990DW Psychrometer displays wet bulb, dew point, humidity and temperature with no twirling or charts necessary. It features a large digital display, wet and dry bulb temperature, min/max memory reading for fahrenheit or celsius.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Manufacturer: Smart Meter Brand: Smart Meter

UT18D can provide AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD Test, single pen measurement (can determine the zero line or wire), self checking and other functions. Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. More detailed product information, please refer to the English manual. Features: Auto Range LCD Backlight Date Hold RCD Test Phase Rotation Test Single Lead (L2) Voltage Detection Self-inspection Polarity Detection High Voltage Indication Low Battery Indication Auto standby Silent Mode Work Light Specifications: AC/DC voltage range: 12/24/50/120/230/400/690V Phase rotation test operating voltage: 100V~690V, frequency: 50Hz~ 60Hz Single lead (L2) voltage detection operating voltage: 100V~690V, frequency: 50Hz~ 400Hz Continuity Test: 0~100K? RCD test operating voltage: 230V(50Hz?400Hz) Power: 1.5V AAA Batteries * 2 (not included) LCD Size: 70 * 35 mm Product Color: Red and Grey Product Net Weight: 264g Product Size: 272mm * 85mm * 31mm Package Information: Package Size: 35.4 * 17.4 * 4.8cm / 13.9 * 6.9 * 1.9in Package Weight: 408g / 14.39oz Blister Package Package List: 1 * UNI-T UT18D Voltage and Continuity Tester 1 * English Manual