Temperature Indicators - Page 36

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 414-130F-054C

When the recorded temperature reached is a question of one point only or space is at a minimum, Wahl Single-Position Temp-Plates provide history at a glance. Easy-to-read recording positions at 130°F (54°C) is simply either " off" (light gray) or " on" (black) at one temperature point only. Perfect for warranties and critical process points.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 414-320F-160C

When the recorded temperature reached is a question of one point only or space is at a minimum, Wahl Single-Position Temp-Plates provide history at a glance. Easy-to-read recording positions at 320°F (160°C) is simply either "off" (light gray) or "on" (black) at one temperature point only.  Perfect for warranties and critical process points.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 414-350F-177C

When the recorded temperature reached is a question of one point only or space is at a minimum, Wahl Single-Position Temp-Plates provide history at a glance. Easy-to-read recording positions at 350°F (177°C) is simply either " off" (light gray) or " on" (black) at one temperature point only. Perfect for warranties and critical process points.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 441-391F

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. These Micro sized labels are our smallest Four-Position models, with temperature points at 390°, 410°, 435° and 450°F. Careful selection of temperature points will allow detection and recording of most overheat occurrences.

Manufacturer: Miljoco Brand: Miljoco Model: B309965-2

3" Bimetal thermometer, glass lens, 1/2 NPT CBM, 2.5" stem, 150 to 750°F/C, 300 series stainless steel case, ring and stem.

Manufacturer: Embedded Data Systems Brand: Embedded Data Systems

The OW-TEMP-B3-12RA temperature probe is designed for wide temperature range applications requiring sensor submersion and/or excellent chemical resistant properties. The 3" probe is resistant to acids, alkalis, ketones, esters, aliphatics, aromatics, and outdoor exposure. It is constructed of 304 Stainless Steel making it both durable and water resistant. The 12' cable used is constructed of Teflon based materials for both the outer jacket and inner conductor insulation. It is particularly suited for harsh environments, and offers excellent resistance to high and low temperatures, oil, gasoline, and sunlight exposure. All of this results in a robust sensor which can be submerged beyond the top of the steel probe. The sensor is equipped with a DS18B20 1-Wire temperature sensor embedded into the probe. In manufacturing the temperature probe a special process is used which insures the internal sensor is thermally coupled to the steel tube wall; this helps insure rapid thermal response to changing conditions. The probe is designed to make the installation process as fast and error free as possible. It is the first 1-Wire probe to automatically identify whether external power is being supplied to the VDD pin and then configure the sensor appropriately. Furthermore, it is terminated with a RJ12 plug which commonly makes installation much easier. The probe is directly compatible with all Embedded Data Systems and Maxim 1-Wire bus masters as well as the freely available TMEX drivers. For complete documentation on the embedded DS18B20 sensor, please refer to the manufacturer's spec sheet.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 240-435F

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. Careful selection of temperature points allows detection and recording of most overheat occurrences. This Fahrenheit label has temperature positions at 435°, 450°, 465° and 490°F.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 240-351F

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. Careful selection of temperature points allows detection and recording of most overheat occurrences. This Fahrenheit label has temperature positions at 350°, 400°, 450° and 500°F.

Manufacturer: Palmer Wahl Instrumentation Group Brand: Wahl Instruments Model: 101-6-215C

Irreversible Temperature Sensitive Labels from Wahl Instruments, Inc. This Mini Six size is smaller than our standard label, and has six "positions" - perfect when our four position Temp-Plates provide too few recording positions. Each position turns permanently and irreversibly black when the indicated temperature is reached, creating a permanent record of overheat. Response time is less than 1 second when measured in water. Pressure sensitive adhesive backing is rated to 500°F on smooth, clean, dry surfaces. The amber colored Kapton material is designed to withstand exposure to high heat in demanding applications. When properly installed, labels are resistant to solvents, fuels, grease, oil, water, and steam. Wahl Temp-Plates have a two year minimum shelf life when stored in their original container at an ambient temperature of 60 to 80°F and a relative humidity of 50%. NIST Traceable labels have a lot code in the back of each box; accuracy calibration records are on file at Wahl. Rectangular Label is .38" High x 1.16" Wide x .013" Thick (10mm High x 38mm Wide x .330mm Thick). One Year Warranty. Sold in recloseable boxes of 10 labels. Made in the USA.

Manufacturer: Embedded Data Systems Brand: Embedded Data Systems

The OW-TEMP-SF-12 temperature sensors are designed for general-purpose temperature measurement applications in the temperature range of -55 to 125 ºC. It is constructed of 8-18 Stainless Steel for durability and is adhesive backed for attachment to flat surfaces or pipes. The OW-TEMP-SF-12 has good chemical resistance properties to acids, alkalies, ketones, esters, allphatics, aromatics, and outdoor exposure. The cable used is constructed of Teflon based materials for both the outer jacket and inner conductor insulation.  It is particularly suited for harsh environments, and offers excellent resistance to high and low temperatures, oil, gasoline, and sunlight exposure. The sensor should not be immersed in liquid, as it is not waterproof. The probe is directly compatible with all Embedded Data Systems and Maxim 1-Wire bus masters, as well as the freely available TMEX drivers. For complete documentation on the embedded DS18S20 sensor, please refer to the Maxim Integrated's DS18S20 spec sheet. The bare lead color coding is as follows: Blue - 1-Wire Signal White - Common (GND)Orange - Ext. Power (VDD) Our standard OW-TEMP-BF-12 sensor has a 12 foot long cable.