Temperature Indicators - Page 45

Manufacturer: VKmaker Brand: VKmaker

Descripition: Parameters: Control range: -50*-110 degrees CelsiusResolution: the -9.9-99.9 of 0.1 degrees Celsius, 1 degrees Celsius temperature section of the otherAccuracy of temperature: 0.1 degreesThe control accuracy: 0.1 degrees CelsiusReturn difference accuracy: 0.1 degrees CelsiusThe refresh frequency: 0.5sHigh temperature protection: 0-110 degrees CelsiusInput voltage: DC 12VMeasurement of the input: NTC (10K 0.5%) waterproof type sensorThe output range: 1 10A relayEnvironmental requirements: -10-60 degrees Celsius, humidity: 20%-85%Size: 48*40mmDisplay type: 0.28 inch three digital tubeMethod of use: Connect the power supply and the negativeCan provide power supply controller for temperature measurement, displayed, press the SET key once, display temperature scintillation,Press +- to set the desired temperature, the setting is finished, press SET as confirmed return,This controller according to the set to automatically perform the relay on-off. The temperature controller output for the 10A relay, to meet a variety of high power load, please ensure that the wiring is correct.Indicator lights, digital tubes state description:Indicator: put out the said relay disconnected, ofen light said the relay is closed,display HH for exceeding the measurement range,the thermostat will force disconnect relay;display - for high temperature protection.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 240-061C

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. Careful selection of temperature points allows detection and recording of most overheat occurrences. This Celsius label has temperature positions at 32°, 37°, 43° and 48°C.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 101-4-202F

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. This mini size has indicators is convenient for smaller spaces. Careful selection of temperature points will allow detection and recording of most overheat occurrences.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 240-087C

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. Careful selection of temperature points allows detection and recording of most overheat occurrences. This Celsius label has temperature positions at 32°, 37°, 43° and 48°C.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 240-072C

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. Careful selection of temperature points allows detection and recording of most overheat occurrences. This Celsius label has temperature positions at 32°, 37°, 43° and 48°C.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 240-132C

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. Careful selection of temperature points allows detection and recording of most overheat occurrences. This Celsius label has temperature positions at 132°, 137°, 143° and 148°C.

Manufacturer: Elitech Brand: Elitech

There are five temperature ranges, please note us which one do you need while placing the order. -7℃~0℃ / 1℃~6℃/ 2℃~8℃ / 18℃~24℃ / 25℃~30℃ Elitech TI-20 temperature indicator is a user friendly device with push-button start of a break-tab start. Like Elitech temperature loggers, this indicator come in a food grade plastic package. It conforms to the FDA & CE quality standards. This temperature indicator is designed to offer convenient and efficient cold supply management. With its LED alarm indication, users don't have to unpack the temperature indicator. Again, every Elitech temperature indicator has a protection grade IP67 and 180 day service cycle. With multiple options of temperature ranges, Elitech temperature indicator can be used in numerous industrial applications. These include cooler boxes, vaccine, fresh food, fresh food lockers, containers, cooler bags, incubators, laboratories, etc. In their manufacturing process, Elitech strives to reduce cost of operation, data acquisition and monitoring. A reason why Elitech temperature indicators are still the best alternative. Operating Instruction: 1.After breaking Elitech Ti-20, the green Led will light about 1 sec. The indicator is switched on successfully. 2.When the indicator is on, the green Led will flash once every 10 min. 3.When the indicator is on, it default measuring interval is 30 sec. If users need, it can be customized to 1 min. 4.When the measured ambient temperature is beyond the temperature range cumulatively for 30 min or 4℃(including 4℃), the red Led alarm indicator will flash once every 10 sec, and the green LED indicator will not flash at 10 min interval. 5.Once the indicator is switched on, the button will be disabled. If the button is pressed at this time, the red or green indicator will not flash. Package: 1x Elitech TI-20 temperature indicator

Manufacturer: Shenzhen Tonglixing Technology CO.,Ltd Brand: Hankcares Model: WB-176

Features: Simultaneously display current temperature, humidity and time with big digit number Automatically memorize MAX & MIN measuring value Alternative12-hour / 24-hour time display mode ºC/ºF selectable temperature readout Clock & Calendar function (month and date) Hour chime and daily alarm function with buzzer reminder Desk-top placing by stand or wall Hanging with back side hanging hole Specifications Measuring Range: 0°C~70°C(32°F~140°F)/ 20%RH~99%RH Accuracy: ±1°C(2°F)/ ±5%RH Resolution: 0.1°C(0.2°F)/ 1% RH Power: 1.5V Battery: AAA 1.5V* 1pc Body size: 110*100*20mm Net Weight:155g

Manufacturer: Alloet Brand: Alloet

Specifications: Temperature range: -50 to 550℃(-58℉-1022℉) Resolution: 0.1℃ or 0.1℉ Repeatability: 1% of reading or 1℃ Response time: 500 mSec, 95% response Spectral response: 8-14 um Emissivity: 0.95 preset Distance to spot size: 12 : 1 Operating temperature: 0 ~ 40℃ (32 ℉~ 104℉) Operating humidity: 10 ~ 95 % R.H. Storage temperature: -20 ~ 60℃ (-4℉ ~ 140℉) Power supply: 9V Alkaline or NiCd Battery (not included) Size: approx. 162 x 95 x 41mm /6.37 x 3.74 x 1.61inch Net Weight: approx. 148g Note:please allow 1-3mm error due to manual measurement and there will be different color as different display, please understand. Thanks. Package Information: 1 x Digital Temperature Thermometer Device( batteries not included)

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The KS Series Irreversible Temperature Labels are the ideal solution to monitor and verify temperature specific operations such as climate conditions during storage and transit. The labels are produced in a variety of temperature points and sizes and permanently darken when exposed at or above the indicated temperature point. The labels are self-adhesive and resist oil, water, and steam, which allows them to be placed on any smooth surface quickly and easily. (KS-0205 pictured)