Temperature Probes & Sensors - Page 17

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: T198482

FLIR iSeries thermal imaging car charger. Re-charge anywhere at your convenience. Suitable for any FLIR iSeries IR camera.

Manufacturer: Sensor Scientific Inc. Brand: Sensor Scientific Inc.

RTD / Pt probe 1000 Ohm , 0.25 inch O.D. stainl. steel housing , 3" long , four leads 24 AWG , twisted Teflon 96 inches lg , CONNECTOR:MOLEX #50-57-9404 ( can be removed if not needed)

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD3 40C 6W Break

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: HS-411

The microprocessor based Series HS Humidity Switch provides control for humidifying or dehumidifying. Relative humidity, output status, and error messaging can be viewed on the bright green LED. The switch features 9 user defined parameters including setpoint, hysteresis, control type, cycle time, and probe adjustment. Access to programming parameters can be locked for security purposes using the password protection feature. The Series HS includes a fitting clip for panel mounting, gasket, rear terminal cover, and instruction manual.

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.125 diameter with an adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: OPTEK TECHNOLOGY Brand: OPTEK TECHNOLOGY

OPTEK TECHNOLOGY OPB822SD PHOTO INTERRUPTER, TRANSMISSIVE, 2.286MM

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, includingââ'¬Â¦ but not limited toââ'¬Â¦ Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.187 diameter (4.75 mm) with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.