Temperature Probes & Sensors - Page 37

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: B1TM25K1SG2.5

Metal sheathed thermocouple assembly. Chromel alumel type thermocouple. 316 Stainless steel sheath material. Single element assembly. Grounded junction. Thermocouple assemblies with connection head. Spring loaded (used with thermowell). Welded stem. Made in the USA.

Manufacturer: CARLO GAVAZZI Brand: CARLO GAVAZZI

CARLO GAVAZZI IA08BSF15POM5 IND PROX SS M8 DC PNP NO PLUG

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 4005

The 4005 Thermistor Pipestrap probe works with any Cooper-Atkins 10K thermistor instrument. The probe will fit any pipe size diameter from 1/8" to 1 3/8".

Manufacturer: Amprobe Brand: Amprobe Model: THWD-5

The THWD-5 Relative Humidity and Temperature Meter with wet bulb and dew point is a microprocessor-based psychrometer is designed for HVAC and plant maintenance engineers and technicians. Easy and quick access to wet bulb and dew point values as well as relative humidity and temperature. The THWD-5 is equipped with an extended probe for easy target access, a large dual LCD display, and is tripod mountable.

Manufacturer: Reed Brand: Reed Instruments Model: LS-181

This type-k male thermocouple connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-181 is rated up 425°F (250°C) and is color coded according to ANSI thermocouple identification standards.

Manufacturer: Texas Instruments Brand: Texas Instruments

TEXAS INSTRUMENTS LM75AIM/NOPB IC, TEMPERATURE SENSOR 9BIT, 2°C 8-SOIC

Manufacturer: Uxcell Brand: uxcell Model: a15063000ux0338

Features with 3 meters long, 7.7mm thread diameter, 200mm probe Length thermocouple. A thermocouple is a device consisting of two different conductors (usually metal alloys) that produce a voltage proportional to a temperature difference between either end of the pair of conductors. Grounded Type is more sensitive to temperature, can help to measure temperature easterly. K Type thermocouple with flexible spring built in. 2 terminals for easy connection. Temperature measurement range is from 0 Celsius to 400 Celsius degree. Widely used for industrial or laboratory to Test equipment's temperature.  

Manufacturer: Tenergy Brand: Tenergy Model: 01005

Accessories Included * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses Smart Charger Specification * FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY * Input: AC100-240V * Output: 6-12V 0.9or1.8A Operation Instruction * Connect battery pack to output connector and plug AC power source. * Make sure battery polarity is connected correctly (Red wire is positive) * Charger will detect battery voltage automatically, Red LED will be on during charging * When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on * Battery will be charged at 0.9A or 1.8A constant current, * Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery. * The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun. * Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh. * Battery pack must be made by high drain current cell. * Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. Caution * The charger is designed for indoor use only. Don't leave the charger unattended during charging. * The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep it away from flammable explosive goods. * Don't cover the charger when charging, ambient temperature shall not be more than 40oC * Don't touch the plug. * Don't leave the abtteries and chargers on wood surface or carpet. * Cut off the power supply before connect or disconnect the charger with batteries. * Don't try to disassemble the charger, High voltage inside, danger!

Manufacturer: Procon Technology Ltd

Item Description Operating Temperature -200~2300 ℉ Probe Material Stainless Steel Probe Diameter 0.2 inch Probe Length （front before bend） 3.2 inch Probe Length （after bend） 1.2 inch Threads Size 1/8" NPT Threads Lock Adjustable Pressure Lock (Adjustable Length) Cable Length 6.6 feet Cable External Shielding Stainless Steel Braiding Cable Internal Insulation Fiberglass Type Ungrounded Connector Mini K Type Connector

Manufacturer: Uxcell Brand: uxcell Model: a12032000ux0410

A thermocouple is a device consisting of two different conductors (usually metal alloys) that produce a voltage proportional to a temperature difference between either end of the pair of conductors. This thermocouple is designed with 3 fork terminals and 150mm Length probe for accurate measurement. Widely used in science and industry applications including temperature measurement for kilns, gas turbine exhaust, diesel engines, and other industrial processes.