Infrared Thermometers - Page 54

Manufacturer: COLE-PARMER Brand: Testo

Ideal for quick, uncomplicated core temperature checks for use in food-related industries such as catering, hotels, restaurants, and supermarkets. Meter is designed to provide fast measurements without leaving visible penetration marks, by using a special thin but robust food probe. Features an audible and visual limit alarm, hold button, on/off switch, auto off, °F/°C selection, and a waterproof IP67-rated case. (Most features can be enabled or disabled on demand.). Whats Included: waterproof case, holding clip, and two lithium batteries Compact, practical, and always ready for use Monitors limit values

Manufacturer: Permanent Deal Brand: Shemya Model: AU1211005-MN04

* Temperature Range: - 50C - 650C (-58 F - 1202F) * Accuracy: +-2% or +-2C * Distance Spot Ratio: 12:1 * Emissivity: 0.95 * Response Time & Wavelength: 500ms & (8-14)um * Repeatability: +-1% or+-1C * Resolution: 0.1C or 0.1F * Storage Temperature: -20-50C (-4-122F) * Operating Temperature: 0-50C(32-122F) * C/F Selection * Data Hold Function * Laser Target Pointer Selection * Backlight Display Selection * Auto Power Shut Off * Low Battery Indication

Manufacturer: Extech Instruments Brand: Extech Instruments Model: IR201 Color: Green

This pocket size infrared thermometer measures the surface temperature of objects without touching them. It's ideal for measuring hot spots in electrical panels and equipment as well as other materials which are difficult to reach or unsafe to touch. A built-in laser pointer improves aim, and in-process temperature measurements are provided. Other features include measurements in ?F or ?C, a 6:1 field of view (at 6" distance measure 1" target), data hold, max hold, and visual overrange indicator.

Manufacturer: wef Brand: General Motors

Accuracy: ±1.5% / or ±1.5C. Resolution: 0.1C or 0.1F. Wavelength: 8-14um. Distance Spot Radio: 12:1. Response Time: 500ms (0.5 second). C/F unit selectable. Backlight ON/OFF selectable. Emissivity: 0.95Preset Laser Target Pointer ON/OFF selectable. Low battery indication. MAX, MIN, AVG, DIF Reading. Automatic data hold function. High/Low Tempterature alarm setup. Data Store/Recall Function. (12 Data Store/Recall) Auto Power Shut Off in 7 Seconds without any operation. Measurement Temperature range: -50°C-700°C ( -58°F-1292°F ). DC 9V battery operation (Battery not Included). Backlight selection, enable you see the temperature display at night.

Manufacturer: Etekcity Brand: Etekcity

Laser Infrared ThermometerSimple Operation - Point and Click!This Etekcity non-contact IR temperature gun is easy to operate. It turns on and begins reading the temperature with one press of the trigger. Clear text displays the measured temperature in either Celsius or Fahrenheit. A laser light aids in aiming, and can be turned on or off. In addition, the readout display features a backlight which can be turned on if neededNOTE:1. The measuring surface is about 2cm below the infrared aiming point.2. For best accuracy, the distance between the thermometer and object of measurement shold approximately be 14.17inches (36cm)SpecificationsTemperature Range:-58℉～1022℉(-50℃～550℃)Accuracy:±2% or 2℃Distance Spot Ratio: 12:1Emissivity Adjustable: 0.95(fixed)Response Time and Wavelength: 500ms and (5-14)umRepeatability:±1% or±1℃Resolution: 0.1℃ or 0.1℉Package Contents1x Etekcity Lasergrip 1080 IR thermometer1x 9V DC battery1x User's manualLaser Distance MeasurerVersatile BuildWhether used for interior design, construction, real estate, landscaping, or sport, the Etekcity HLD40 is engineered to meet your measuring needs with six calculation functions: Area, Height (Pythagorean Theorem), Volume, Area Summation, Addition/Subtraction, and Stake Out FunctionNote: It may result "Measure Error" when background brightness is too high,which may always happen using outdoorsSpecificationsMeasuring Range:0.05-50mMeasuring Tolerance:±2.0mmMaximum Measuring Tolerance:±3.0mmLaser type: 620-690nm,

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-39643-00

The Oakton WD-39643-00 Palm-Sized infrared thermometer measures surface temperature from a safe difference for use in food preparation, field measurements, and mechanical maintenance and troubleshooting. The thermometer measures temperature from - 33 to 250 degrees C (-27 to 482 degrees F), with an accuracy of + or - 2% of the measurement or 2 degrees C/3.6 degrees F, whichever is higher. The thermometer has an 8:1 distance-to-spot measurement ratio with laser sighting for pinpointing the measurement area. A lock function allows for continuous measurements without having to hold down a button. A 90% accurate measurement is available in 1 second, allowing rapid measurement of moving parts. The unit's memory stores minimum/maximum measurements and the unit has a hold function and selectable auto-off. The Oakton WD-39643-00 is used to measure the temperature of hot and cold food products, electrical connections, engine parts, and other surfaces.SpecificationsTemperature range-33 to 250 degrees C (27 to 482 degrees F)Accuracy+ or - 2% or 2 degrees C (3.6 degrees F)Resolution1 degree C/1 degree FDistance-to-spot ratio8:1Power supply(2) 3V CR2032 battery (included)Dimensions (H x W x D)4.5 x 2 x 0.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in ear thermometers, or dangerous to be near, as in the case of industrial equipment.Oakton Instruments manufactures scientific instruments for resear...

Manufacturer: SAMPO Brand: Sampo

Features:Noncontact measuring, Inside laser aimer, White backlight LCD, D:S=10:1Auto-data hold and auto-turn off (Auto turn off after 15sec,when release the button)A great many of emissivity symbolsCan be used for food, safety-inspect£¬fire inspect, power vehicle and diesel engine, plastic factory etcSpecifications:Resolution: 0.5¡ãC(0.5 Degrees F)Measuring Range: -30 to 520 Degrees C(-22 to 960 Degrees F)Response Time: 0.5secSpectral Response: 8 to 14¦ÌmEmissivity: 0.99/0.95/0.89/0.85/0.79/0.75Power Supply: 1*9V battery (not included)Measuring Precision: -30 to 520 Degrees C, ¡À(1.5%+1 Degrees C)¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡-22 to 960 Degrees F, ¡À(1.5%+1 Degrees F)Ambient Operating Range: -10 to 40 Degrees C(14 to 104 Degrees F)Relative Humidity: 10 to 80%RHSKU: X1IN10191Package includes:1 * Non-Contact IR Infrared Digital Thermometer1 * User Manual

Manufacturer: PSG Controls, Inc. Brand: PSG Controls, Inc.

Thermometer, digital pocket, Kwik-Therm® pad, -50°F to 300°F A digital temperature indicator that has a swiveling head which makes it easy to read at any angle. It has 0.1° resolution and 1%. It updates every 15 seconds automatically and has a 1 second instant update button. Uses a standard #393 battery (included). Temperature range: -50°F to +300°F

Manufacturer: Neiko Brand: Neiko Color: Multi

Neiko INFRARED THERMOMETER Non-contact IR Temperature Laser Target 1022°Non-contact Infrared Thermometer; Pistol Type* Measurement Range: -30C To 550 C Or -4 F To 1022 F* Accuracy: +- 4 F(+- 2% +- 2 C)* Response Time: 500 MSECOND; 95%* Emissivity: 0.1- 1.0 Adjustable* Laser Pointer* Power: 9 V Battery Included* Pouch Included

Manufacturer: CEM Brand: CEM

DT-8830/8831/8832/8833 Professional InfraRed Thermometers with Type K input 8830/8831/8832/8833 Professional InfraRed Thermometers provide fast, easy and accurate readings for most surface temperature measurements with Type K Input and 20 Points Memory.