Digital Thermometers - Page 62

Manufacturer: Chang Bioscience Brand: CB

The handhold digital thermometer is idea for checking temperatures of oven, heated solution, water bath, incubation chamber, and reaction vessel. Temperature sensor is connected to display by a 1.3 m (4 feet) long cable.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: D010304WI

WIKA's TI.D01 solar industrial thermometer offers fast, accurate, and easy-to-read temperature indications. This thermometer features a totally adjustable case to permit viewing at any angle, and its bulb and socket are completely interchangeable with standard industrial glass thermometers. The solar industrial thermometer is switchable between Fahrenheit and Celsius, and offers a sensing range of -50 to 300 degree F and -50 to 150 degree C, resolved in tenths of a degree, with accuracy to within +/-1 percent of reading. Resolution: 1/10 degree between -19.9/199.9 degree F (-28/93 degree C). Lux rating: 10 Lux (one foot candle). 10 seconds Update. Ambient operating temperature: -30/140 degree F (-35/60 degree C). Humidity: 100 percent maximum. High-impact ABS Case. 3/8" Display; LCD Digits, wide ambient temperature range. Sensor: glass passivated thermistor. Stem material: aluminum. Available with reversible flange air duct stem. Limited one year warranty.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4521

Triple display constantly shows minimum/maximum, and current temperatures. Instantly view if freezer, water bath, or incubator is within temperature spec. Monitor temperature of any experiment when you’re not there-overnight, weekends. Range is -50 to 70 degree C. Resolution is 1 degree and accuracy is +/-1 degree C. Sensor and 10-foot cable may be placed under water, in refrigerator, or freezer. Small cable diameter (1/16") allows refrigerator doors to close on it with no effect. Unplugging the cable activates a sensor inside the unit for monitoring ambient room temperature. Simple, one-button operation resets the minimum/maximum memories. Probe’s wire-mounting bracket permits easy sensor placement. Low battery is signaled on the display. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Unit’s high-impact ABS plastic case has a flip-open stand, wall hanging hook, magnet and Velcro mounting tape. Measures 2.5" width by 2-5/8" height by 0.75" thick and weight is 1-7/8 ounces. Unit runs continuously for 1 year on the supplied battery.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: TRH158-0-8

Measure both temperature and humidity with the TRH158. It is wall or desk mountable and is F/C selectable.

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: DTK2 Color: Multicolored

The product is easy to use. The product is durable. True-RMS for accurate measurement in all applications.

Manufacturer: CONTROL COMPANY Brand: CONTROL COMPANY Model: 6425

Additional Bottle Remote Module, for refrigerator/freezer applications - 6425 - EACH

Manufacturer: Testo AG Brand: Testo Model: 0560 9055 Color: Multicolored

The Testo 0560 9055 Pocket Line penetration digital thermometer is a dual-range Type K thermocouple thermometer for use in monitoring short temperature measurements of electrical, mechanical, and HVAC equipment. It measures temperature from -50 to +350 degrees C (-58 to +660 degrees F), and short-term up to 500 degrees C (930 degrees F), with an accuracy of + or - 1 degree C (1.8 degrees F) from -50 to +99.9 degrees C (-58 to +212 degrees F) and + or - 1% of the reading outside this range. This thermometer has a 7.9" stem with a Type K thermocouple sensor in the tip for taking accurate measurements. The head swivels in all directions for visibility when reading temperatures at any angle. The unit operates on three AAA batteries and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with batteries, a belt clip, and instructions.SpecificationsTemperature range-50 to +350 degrees C (-58 to +660 degrees F) and short-term up to 500 degrees C (930 degrees F)Display resolution0.1 degree F (0.1 degree C)Accuracy+ or - 1 degree C (1.8 degrees F) from -50 to +99.9 degrees C (-58 to +212 degrees F) and + or - 1% of the reading outside this rangeResponse time10 secondsStandards metCE markPower supply(3) AAA batteriesWeight2.8oz.Dimensions10 x 1.5 x 1.4 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: D010301WI

WIKA's TI.D01 solar industrial thermometer offers fast, accurate, and easy-to-read temperature indications. This thermometer features a totally adjustable case to permit viewing at any angle, and its bulb and socket are completely interchangeable with standard industrial glass thermometers. The solar industrial thermometer is switchable between Fahrenheit and Celsius, and offers a sensing range of -50 to 300 degree F and -50 to 150 degree C, resolved in tenths of a degree, with accuracy to within +/-1 percent of reading. Resolution: 1/10 degree between -19.9/199.9 degree F (-28/93 degree C). Lux rating: 10 Lux (one foot candle). 10 seconds Update. Ambient operating temperature: -30/140 degree F (-35/60 degree C). Humidity: 100 percent maximum. High-impact ABS Case. 3/8" Display; LCD Digits, wide ambient temperature range. Sensor: glass passivated thermistor. Stem material: aluminum. Available with brass thermowell. Limited one year warranty.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: D010300WI

WIKA's TI.D01 solar industrial thermometer offers fast, accurate, and easy-to-read temperature indications. This thermometer features a totally adjustable case to permit viewing at any angle, and its bulb and socket are completely interchangeable with standard industrial glass thermometers. The solar industrial thermometer is switchable between Fahrenheit and Celsius, and offers a sensing range of -50 to 300 degree F and -50 to 150 degree C, resolved in tenths of a degree, with accuracy to within +/-1 percent of reading. Resolution: 1/10 degree between -19.9/199.9 degree F (-28/93 degree C). Lux rating: 10 Lux (one foot candle). 10 seconds Update. Ambient operating temperature: -30/140 degree F (-35/60 degree C). Humidity: 100 percent maximum. High-impact ABS Case. 3/8" Display; LCD Digits, wide ambient temperature range. Sensor: glass passivated thermistor. Stem material: aluminum. Available without brass thermowell. Limited one year warranty.