Glass Thermometers - Page 36

Manufacturer: Miljoco Brand: Miljoco Model: SX93560 Color: Blue organic-filled glass tube

Industrial thermometer, 9" cast aluminum case, acrylic lens, blue spirit-filled liquid in glass, adjustable angle 3.5" aluminum stem with 1-1/4" 18 UNF brass coupling nut, 30 to 300°F temperature range.

Manufacturer: Thermco Brand: THERMCO

"ACCUTHERM" LABORATORY INSTRUMENT THERMOMETERS - SPIRIT Oven, 20/130C x 1.0C, Total Imm

Manufacturer: THERMCO PRODUCTS, INC Brand: THERMCO PRODUCTS, INC

PTFE Resin Coated Safety Thermometer, -20 to 110°C, 305mm Length, 76mm Immersion, White Backing - 1 Each

Manufacturer: NEWGATE Brand: i-mesh-bean

Operating Instruction Put in a 9V battery by opening the battery compartment cover using a screwdriver. The instrument requires Thermocouple probes to be inserted to measure temperatures.There are 4 probe sockets on the top and corresponding to T1 to T4 respectively. (The probe has + and - terminal and they need to be inserted into sockets with correct polarity) This instrument can't function with probe disconnected. This instrument is simple to use and please refer to below section for each key's function. Product Outlook and Functions 1.Probe socket and Thermocouple probes 2.LCD 3.Power ON/OFF button 4.HOLD - Suspend measurement and hold the current measurement data 5.UNIT - Switch among °C ; °F and K display unit 6.Backlit - Turn ON / OFF the display backlight 7.MAX - Turn ON / OFF the maximum temperature values 8.MIN - Turn ON / OFF the minimum temperature values 9.AVG - Turn ON / OFF the average temperature values from turning on the instrument till pressing AVG button. 10.Battery compartment Notes : The Thermometer is not a waterproof nor drop resistant instrument, so please take good care of it after use. Put it in a place where children cannot access. Package include(All packed in safe retail box): 1 x 4-channel K-type digital thermometer thermocouple sensor 1 x user manual (in english) 1 x original 9V battery 4 x probe sensor 1 x pipe clamp

Manufacturer: Boekel Scientific Brand: Boekel Industries Model: 1151

Thermometers are used to measure temperature for various applications such as education, general purpose QC labs and research lab testing, and for biological process monitoring.Boekel Scientific manufactures laboratory equipment such as incubators, shakers, rotators, and water baths. The company, founded in 1868 and headquartered in Feasterville, PA, meets International Organization for Standardization (ISO) standards 9001:2008 and 13485:2003.

Manufacturer: GLA Agricultural Electronics Brand: GLA Agricultural Electronics

The GLA M700 digital cattle and large animal thermometer is used the world over in cow-calf operations, feedlots, dairies, veal units, horse farms, race tracks, universities, game preserves, and zoos. The GLA M700 ships complete with thermometer body, 4 inch angled stainless steel thermal probe on 6-ft coiled cord, wall charger and user manual--everything you need to start taking large-animal temperatures, quickly and accurately. The easy-to-read LED display and the accuracy, speed, and durability you have come to depend on in a GLA livestock thermometer, are all featured in the M700. As are many of the extras including: peak temperature hold; Fahrenheit / Celsius switchable, automatic shut-off, continual recharging, a battery voltage display; and low battery warning. More GLA M700 Features: Accurate temperature readings in 8 to 15 seconds; Fahrenheit or Celsius; Large LED Display; Peak Hold Temperature Mode (indicated by PH); Peak Hold Temperature Mode indicated by flashing decimal point; Continuous Temperature Mode (indicated by CO); Calibration Check Position; Self re-setting fuse; Ambient light sensing display; Charging Indicator; Battery Voltage Indicator; Err1 Reading when probe is not attached or not reading properly; Err2 Reading when low battery is detected; Automatic shut-off after five minutes. The GLA M750 digital thermometer is also available on Amazon.

Manufacturer: Vee Gee Scientific Inc. Brand: VeeGee

This item is a red spirit-filled glass 76mm partial immersion thermometer with a total length of 12"/305mm with a white backing. LIQUID-IN-GLASS, W/ NON-ROLL FITTINGS, ACCURACY IS ± ONE SUBDIVISION, 76mm IMMERSION WITH WHITE BACKING. 305mm Total Length.

Brand: BSG Hand Craft

Economical triple-scale hydrometer measures in Specific Gravity, Balling (Brix) and Potential Alcohol (ABV). The packing tube can be used as a test jar and it includes instructions with temperature conversion chart. Able to be used with beer, wine and cider. Working Range: Specific Gravity: 0.990 - 1.170 (0.002 Resolution) Balling (Brix): 0 - 38% Sugar (0.05% Resolution) Potential Alcohol: 0 - 22% (1% Resolution) Calibrated Temperature: 60°F (instructions included for temperature adjustments) Item Includes: 1 - Glass Hydrometer 1 - Set of Instructions 1 - Plastic Storage Container and Cap How To Use A Hydrometer: Fill the test tube with enough liquid to float the hydrometer in it before fermentation begins. The reading is the number on the hydrometer that intersects with the surface of the liquid. Record this reading as your Original Gravity (a.k.a. O.G., Starting Gravity). This measurement also indicates the potential alcohol if all of the sugar is fermented. After fermentation is complete, measure another sample of the liquid to determine the Final Gravity (a.k.a.: F.G., Terminal Gravity). The difference displayed is the amount of sugar that has been converted to alcohol. To determine the actual alcohol content, subtract the percentage of potential alcohol that you recorded from the Starting Gravity from the percentage of potential alcohol that you recorded from the Final Gravity.

Manufacturer: Scientific Equipment of Houston Brand: SEOH

This thermometer is Blue Spirit filled with a temperature range of -20 to 110C. Total Immersion. Student grade. Total length is approximately 12 inches (300mm) with ring on top for suspension. Graduations are every 1 degree.

Manufacturer: Corning Brand: Corning Model: 7715

This Corning rubber thermometer holder has a 17mm O.D. and a 13mm I.D. and is designed for use with the No. 7711 mercury thermometer. It is a replacement part for organic chemistry kits Nos. 6949-6949K.