|
|
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $24.48 30% OFF
Manufacturer: Winters
Brand: Winters Instruments
Model: TBM30060B6
Manufacturer: Winters
Brand: Winters Instruments
Model: TBM30060B6
|
A general purpose, versatile stainless steel 304 thermometer. Bi-metallic sensing element for reliable readings. Fixed centre back connection. Anti-parallax dial that reduces operator reading errors. 5 Year warranty. Welded stem. Application: industrial process, heating and air conditioning, ventilation and wastewater. Dial 3" aluminum with black markings, dish-shaped. Case: stainless steel 304 AISI. Recalibrator: standard. Ring: stainless steel 304 AISI. Sensing element: bi-metallic coil. Pointer: aluminum, painted black. Maximum operating pressure: 125 psi (861 kPa). Operating temperature: 75 percent of full scale value (recommended maximum). Ambient temperature: -58/248 degree fahrenheit. +/- 1 Percent accuracy. Enclosure rating IP68. Lens: Glass standard, hermetically sealed. Re-zero adjustment screws are standard on the 3" dial. Connection: 1/2" NPT standard. Temperature ranges: 0 degree F to 200 degree F and -20 degree C to 90 degree C. RoHS Compliant.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $24.85 9% OFF
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: S551S
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: S551S
This general purpose thermometer features a red reading, non-toxic spirit-filled tube. The 5" scale is easily read against the wide front magnifying glass tubing. Rugged and economical, this industrial thermometer meets most specifications for the general construction industry. Common applications are hot-water boilers, refrigeration lines, light-duty steam service and chillers. Thermowell: Brass, 1/2" NPT, with 1-1/2" immersion length for pressurized systems. Accuracy: +/-1 scale division. Ambient temperature: -40 to 140 degree F (-40 to 60 degree C).
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $25.00 25% OFF
Manufacturer: Reed
Brand: Baker Instruments
Model: 312FC
Manufacturer: Reed
Brand: Baker Instruments
Model: 312FC
The Baker 312FC surface thermometer is specifically designed to be used on horizontal or ferrous surfaces. It features two alnico magnets that act as the thermometer’s base and hold it in place and the Bimetallic sensor is a specially processed alloy that is preconditioned and pretested for permanent calibration and maximum stability. The sensor is located in a draft shield and is in virtual thermal contact with the surface to be measured which means a relatively quick response time and it reaches sensing equilibrium (stability) within three minutes. It is designed for applications such as: hot plates; griddles; die-cast dies; foundry core boxes; annealing ovens; weld preheats; motors; generators; engines; bearings; boilers, tanks, and drums. Please note you may receive a "REED" branded product which will be the exact same product as shown in this listing.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $25.00 25% OFF
Manufacturer: Reed
Brand: Baker Instruments
Model: 314FC
Manufacturer: Reed
Brand: Baker Instruments
Model: 314FC
The Baker 314FC surface thermometer is specifically designed to be used on horizontal or ferrous surfaces. It features two alnico magnets that act as the thermometer’s base and hold it in place and the Bimetallic sensor is a specially processed alloy that is preconditioned and pretested for permanent calibration and maximum stability. The sensor is located in a draft shield and is in virtual thermal contact with the surface to be measured which means a relatively quick response time and it reaches sensing equilibrium (stability) within three minutes. It is designed for applications such as: hot plates; griddles; die-cast dies; foundry core boxes; annealing ovens; weld preheats; motors; generators; engines; bearings; boilers, tanks, and drums. Please note you may receive a "REED" branded product which will be the exact same product as shown in this listing.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $25.00
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
The Series CBT Clip-On Thermometers are designed to monitor the temperatures of products while they are cooking. The Series CBT thermometers give accurate readings by clipping onto the side of a pot in order to keep the temperature probe away from the bottom and sides. These thermometers are conveniently available in 11 ranges and two stem lengths to fit various sized pots or kettles. The Series CBT Clip-On Thermometers are constructed of durable stainless steel for years of reliable service. The Series CBT can be used when preparing candies, soups, and deep fried foods.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $25.83 1% OFF
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: V2036
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: V2036
|
Miljoco vapor dial thermometers are manufactured to the highest standards for a wide range of uses and may be fitted into almost any temperature reading application. These instruments are ideal for obtaining readings from remote locations. Being vapor actuated, they are not subject to any ambient temperature variations along the tube system and give excellent readings both above and below ambient. Vapor instruments have progressive graduations and are best read in the upper two-thirds of the range. Front flange thermometers are designed to be installed in a panel using three screws from the front. Miljoco thermometers are listed by NSF for use in the food service industry. Flush mount - front flange case. Rear outlet. Accuracy: +/-1 scale division. Capillary tubing: 60" tin-plated copper (standard). Connection: plain. Sensing bulb: nickel-plated copper bulb, 7/16" diameter. Ambient temperature: -40 to 140 degree F (-40 to 60 degree C).
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $27.87 64% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DBTA3901
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DBTA3901
The Series DBT Digital Solar-Powered Bimetal Thermometer takes the guesswork out of temperature measurement. The 3-1/2 digit LED display is easy to read and provides resolution to 0.1°F. The adjustable angle can be mounted in virtually any position. The engineering units can be selected in the field by removing the back cover
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $28.05
Manufacturer: Taylor Thermometers
Brand: Taylor Precision Products
Model: 6215J
Color: Silver
Manufacturer: Taylor Thermometers
Brand: Taylor Precision Products
Model: 6215J
Color: Silver
Ensure your meals are cooked evenly at the proper temperature range with this Superior Grade 2-inch Dial Thermometer from Taylor. The 2-inch dial features a black pointer making it easy to read. This thermometer measures a temperature range of 0 degrees to 220 degrees Fahrenheit with a degree division of 2 degrees Fahrenheit to ensure accurate readings. Three-point calibration provides +/- 2 degree accuracy of the entire temperature range. The 8-inch stem is constructed of stainless steel for a great look and corrosion resistance. The large dial features bold black numbers and a black pointer for ease of reading.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $28.05 1% OFF
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: V2036
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: V2036
|
Miljoco vapor dial thermometers are manufactured to the highest standards for a wide range of uses and may be fitted into almost any temperature reading application. These instruments are ideal for obtaining readings from remote locations. Being vapor actuated, they are not subject to any ambient temperature variations along the tube system and give excellent readings both above and below ambient. Vapor instruments have progressive graduations and are best read in the upper two-thirds of the range. Front flange thermometers are designed to be installed in a panel using three screws from the front. Miljoco thermometers are listed by NSF for use in the food service industry. Flush mount - front flange case. Rear outlet. Accuracy: +/-1 scale division. Capillary tubing: 60" tin-plated copper (standard). Connection: plain. Sensing bulb: nickel-plated copper bulb, 7/16" diameter. Ambient temperature: -40 to 140 degree F (-40 to 60 degree C).
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $29.05 64% OFF
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: V2036
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: V2036
|
Miljoco vapor dial thermometers are manufactured to the highest standards for a wide range of uses and may be fitted into almost any temperature reading application. These instruments are ideal for obtaining readings from remote locations. Being vapor actuated, they are not subject to any ambient temperature variations along the tube system and give excellent readings both above and below ambient. Vapor instruments have progressive graduations and are best read in the upper two-thirds of the range. Front flange thermometers are designed to be installed in a panel using three screws from the front. Miljoco thermometers are listed by NSF for use in the food service industry. Flush mount - front flange case. Rear outlet. Accuracy: +/-1 scale division. Capillary tubing: 60" tin-plated copper (standard). Connection: plain. Sensing bulb: nickel-plated copper bulb, 7/16" diameter. Ambient temperature: -40 to 140 degree F (-40 to 60 degree C).
|
|