Dial Thermometers - Page 48

Manufacturer: G-Reindeer Brand: G-Reindeer Model: GS320

This infrared thermometer is used for measuring the temperature of the object's surface, which is applicable for various hot, hazardous or hard to reach objects without contact safely and quickly.This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.Widly Application : For instance, Hot/Cold water temperature, Freezer Refrigerating box,Tyre , The engine cylinder, Boiled Oil ,electrical connection, heating air conditioning, etc. Warning1) Do not point laser directly at eye or indirectly off reflective surfaces.2) Do not use this unit in the environment of explosive gas, steam or dusty. Specification : - Temperature range : -58 to 680F(-50 to +360C)- Accuracy: +-1.5% or +-1.5C(+-2.7F)- Resolution: 0.1C or 0.1F- Repeatability : 1% of reading or 1C- Response time : 500mS- Emissivity : 0.95 Preset- Distance to Spot size : 12:1- Operating Temperature : 32 to 104F- Operating Humidity : 10-90% RH- Storage Temperature : -4 to 140F- Power : 2Pcs*AAA Battery 1.5V- Typical battery life : Lase off : 12hrsPacking Content : - 1 x Infrared Temperature Gun- 2 x AAA Battery- 1 x User Manual

Manufacturer: Reotemp Brand: REOTEMP

Magnetic Dial Thermometer, Bimetal, Dial Size 2 In.Connection Location BackTemp. Range (F) 0 Degrees to 150 Degrees Accuracy +/-2 PercentCase Material AluminumWindow Material Plastic

Manufacturer: Thermco Brand: THERMCO

Thermco's BI-METAL Dial Thermometers feature quality construction and design with easy to read black scale on a white background. The accuracy of these thermometers is +/- 1% over the entire scale. All stainless steel case, stem, and bezel for superior shock protection, even in extreme conditions. The lens is made from unbreakable polycarbonate. An external nut provides for easy recalibration. Immersion is approximately 2" (50mm). Supplied with a convenient plastic stem case which has a pocket clip. This case can also be used as a handle for the thermometer.

Manufacturer: Industrial Grade Brand: Industrial Grade

Compact Thermometer, Temp Range 20 to 120 F, Scale Divisions 2 Degrees, Insertion Length 1.4 In, Stem Length 2 In, Stem Dia 0.5 In, Connection Size 1/2 In NPT, Connection Style Back, Fill Non-Toxic Blue Liquid, Accuracy +/-1%, Case Material Valox, Case Color Gray, Scale Material Aluminum, Scale Color White with Black Numbers, Window Material Glass, Includes Thermowell and Instructions

Manufacturer: Steridyne Corp. Brand: Steridyne Corp.

Digital Thermometer Probe Cover

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Measure the temperature of boilers, air ducts, motors, bearings, furnaces, or other surfaces with Series ST Surface Mount Thermometers. Dual magnet design allows easy mounting on any ferrous surface. Bi-metallic thermal sensing coil provides quick temperature measurement with ±2% full scale accuracy.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 50EI60E090XNHSG50/300F

This series has a hermetic seal and an external adjustment in the rear of the case. As with other Ashcroft industrial bimetal thermometers, it has a Maxivision dial which eliminates parallax by placing the pointer on the same plane as the graduations. The connection locations are rear, lower, and Every angle. The hermetic seal prevents entry of moisture into the casing, thus minimizing the possibility of icing or fogging inside the case. The window stays clear, and with the Maxivision dial, precise readings are certain.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Series BT Bimetal Thermometers offer accurate, reliable service even in the toughest environments. These corrosion resistant units are constructed from stainless steel and are hermetically sealed to prevent crystal fogging. The bimetal element directly drives pointer, eliminating gears and linkage. An external reset screw allows field calibration and easy-to-read aluminum dial minimizes parallax error. Choose back connection, lower connection, or adjustable angle for easy viewing and installation. Adjustable models can be rotated a full 360° and tilted over a 180° arc. NOTE: When using in pressurized applications, use a suitable thermowell.

Manufacturer: Industrial Grade Brand: Industrial Grade

Bimetal Thermometer, Back Connection, Stem Length 9 In, Temp Range 50 to 550 F, Dial Size 2 In, Stem Dia 1/4 In, Connection Size 1/4 In NPT, Coil Finish Silicone for Superior Time Response and Vibration Dampening, Full Scale Accuracy 1 %, Hermetically Sealed to Prevent Icing/Fogging Inside Case, Stainless Steel Case Material, Stainless Steel Stem Material, Calibration External Adjustment, Glass Face

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 33090D216G4

WIKA's industrial grade bimetal dial thermometer, TI.33 is an ideal choice where a weather-resistant, tamper-proof thermometer is needed. There is a 1 year warranty. Over Range: Temporary over or under range tolerance of 50 percent of scale up to 500 oF. (260 degree C). For ranges above 500 degree F, maximum over range is 800 degree F; continous. 1000 degree F intermittent. Connection: Material: 304 stainless steel enter back mount (CBM); 1/2" NPT connection. Stem Material: 304 stainless steel Diameter: 1/4" (6.35 mm). Measuring Element: Bi-metal helix. Dial: White aluminum, dished, with black. Case Material: 304 stainless steel Hermetically sealed Ingress protection IP 65. Pointer: Black aluminum. Standard Scales: Single: Fahrenheit or Celsius Dual: Fahrenheit (outer) and Celsius (inner). Window Gasket: Neoprene Silicone (-100 degree F and over 550 degree F). Window: Flat instrument glass. Dampening Inert gel to minimize pointer oscillation.