Temperature Controllers - Page 34

Manufacturer: Thomas Scientific Brand: Thomas Model: 4130

Controller turns any piece of equipment on or off when temperature rises above high set point or falls below low set point. Wide measurement range of -4 to 140 degree F and -20 to 60 degree C, and setting range of 32 to 140 degree F/0 to 60 degree C permits measuring, and maintaining temperatures above or below ambient. Control heating elements, cooling blocks, hot plates, heating mantles, cooling systems, or incubators to an accuracy of +/-1 degree C. Controller may be set in 1 degree increments. Display reads in degree F and degree C with a 0.1 degree resolution. Unit accepts standard, three-pronged plug and controls equipment rated to 1800 watts, 15 amps. Brilliant, 1/2" high LCD shows the temperature and time of day to the exact second. Red LED status light indicates on/off mode of attached equipment. Uses the same microchip and software that control sophisticated plant operations. May also be programmed to turn equipment on and off at any minute of any day. Always-remember memory permits programming three different pairs of on/off time switchings per day. Memory chip and display are powered by two AAA batteries. Simple commands are a joy to use. Display walks you through steps. Set high and low temperatures or schedule timer on/off settings in just seconds with press of a few buttons. Manual override permits equipment to be switched on or off instantly without disturbing temperature or timer settings. Traceable to NIST for accuracy: To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability for temperature only to standards provided by NIST. Both controller and relay are 2-3/4" x 5-1/2" x 1-1/4" and weight is 1 pound. May be used with equipment to 115 VAC, 1800 watts, 15 amps. Temperature sensor cable is 3-1/2 feet in length. Unit is supplied with batteries and a Traceable Certificate.

Manufacturer: Honeywell Brand: Honeywell Model: L480G1044

Used to limit or control temperature in air conditioning systems or Refrigerated enclosures.

Manufacturer: Autonics Brand: Autonics USA, Inc

Temp Control, DIN W72XH72mm, 1 Alarm,Relay Contact Output1, Current or SSR Drive Output2, 100-240VAC

Manufacturer: Autonics Brand: Autonics USA, Inc

Temp Control, DIN W96XH48mm, 1 Alarm,Relay Contact Output1, Current or SSR Drive Output2, 100-240VAC

Manufacturer: Gerbing Brand: Gerbing Model: gerb-tcpbd Color: Black

Temp-Controller - Portable - Dual

Manufacturer: Autonics Brand: Autonics USA, Inc

Temp Control, DIN W96XH96mm, 2 Alarm+PV transmission, Relay Contact Output, 100-240VAC

Manufacturer: Watlow Brand: Watlow

From our inventory we are selling a New In Box Watlow SD4C-HKKA-AARG Temerature Controller, Supply: 100-240VAC. Specifications: Model #: SD4C-HKKA-AARG More Information: New In Box Temerature Controller Supply: 100-240VAC DIN Size: 1/4 DIN Control Type: PID Control Output 1 and 2: Solid-State Relay Form A, 0.5 Amp Display Colors: Red Green

Manufacturer: Tempco Brand: Tempco

Temperature Controller, Analog, J Sensor Type, Input Voltage 120/240 VAC, Length 3.37 In, Width 3.37 In, Depth 2.56 In, Control Mode Proportional, Control Period 20 Sec, Dial Setpoint, Deviation Meter Display, DIN Type 1/4, Hysteresis 1% of Span, Proportional Band 2.2% of Span, Setting Accuracy Plus/Minus 2% of Span, Output Relay 5A, Power Consumption 5VA, 50 to 850 F, Standards CE Analog Temperature ControllersProportioning controls feature dial/potentiometer setpoint. 5A output relay. 20-sec. cycle time. Temp. range: 50 to 850 F.UL Listed, CSA and CE Certified.

Manufacturer: Autonics Brand: Autonics USA, Inc

Temp Control, DIN W96XH48mm, 2 Alarm,Relay Contact Output1, Relay Contact Output 2, 100-240VAC

Manufacturer: OMRON Brand: Omron

NEW OMRON E5CSV-Q1T-F 100-240V-AC TEMPERATURE CONTROLLER D536088