Temperature Controllers - Page 55

Manufacturer: Veris Brand: Veris

Insertion RH/Temp Sensor, 4-20mA Output, 2% Accuracy, 1uA/C Linetemp, 5 Year Warranty

Manufacturer: HONEYWELL Brand: Honeywell

NEW HONEYWELL T7067B1006 TRANSMITTER 55-85F 20V-DC TEMP CONTROLLER D510004

Manufacturer: iPower Distributor L&G Brand: Titan Controls Model: 702852

The Saturn 6 give you the control of your temperature (day & night), humidity and CO2 PPM levels with digital accuracy. It comes with a 15 foot remote sensor which also features a photocell. The photocell ensures daytime only CO2 enrichment and the ability to control a 'night only' device. The LCD display and push buttons allow you to easily change the settings. It has min/max data logging capabilities. Plastic enclosure protects internal components from dust, rust and moisture. 15 Amps/120 Volts/60 Hz. 3 year warranty.

Manufacturer: Icstation Brand: Generic

This is a mini digital thermostat with black case and waterproof NTC(10k 0.5%) temperature sensor probe supporting -20℃-100℃(-4℉-212℉) measuring range.On-board 3 digit dual LED display the setting upper and lower limit temperature.On-board DC 12V one channel relay control the power on/off ideal for DIY temperature control system use. Specifications: Measuring Range: -20℃-100℃(-4℉-212℉) Mesuraing Accuracy:±0.1℃ Backlash Precision:0.1℃ Refresh Frequency:0.5s Temperature Sensor Type:10K0.5% NTC Working Temperature:-10℃-60℃(14℉-140℉) Compatible Load: 20A 125VAC, 20A 14VDC Power Supply: DC12V Module Size: 48 X 29mm/1.89 X 1.14inch(L*W*H) Package Included: 1X Mini Digital Thermostat Working Principle 1.cooling mode(set the start temperature>stop temperature):when detecing the ambient temperature is over the start temperature, the relay close the cooling device will start work, when the ambient teperature is below the stop temerature, the relay open, the cooling machine stop working.2.heating mode(set the start temperature < stop temperature):when detecting the ambient temperature is below the start temperature, the relay close, the heating device will start working, whent the ambient temperature is over the stop temperature, the relay open, heating machine stop working. Setting Insturctions:Short press the "SET" key to set the up and down temperature limit values, the up and down LED dispaly will flash, then press"+" and "-" to regulate the value. After setting and wait 5s the module will save the parameter automatically Long press the "SET" key step into the current temperature measuring and working mode checking interface. The up LED display the current temperature and the down LED display the working mode(C represent cooling mode, H represent heating mode, OFF represent stop)

Brand: Morning Star

Manufacturer: Hotset America Brand: Hotset America

This Hotset 4010822 Hotrod 230V, 315W cartridge heater has a 6.5 mm diameter, is 80 mm long, and is suitable for use with packaging machines, extruders, casting machines, cutting knives, and other industrial tool-heating applications that require a heat source. It has a maximum watt density of 65W/sq. cm (419W/sq. inch) and a maximum Underwriters Laboratories (UL)-rated watt density of 57W/sq. cm. Its leads are mounted internally and sealed with ceramic. The heater has a European standard 1.4541 stainless steel sheath for resistance to corrosion and is filled with an NiCr (nichrome) 8020 heating conductor for high-temperature stability. The sheath has a maximum temperature rating of 750 degrees C (1,380 degrees F). The heater is rated for a maximum of 480V and has a maximum UL-rated voltage of 250V. It has an Ingress Protection (IP) rating of IP67 for protection from dust and from water when immersed to a depth of 1 m for up to 30 minutes. It is Verband der Elektrotechnik (VDE) certified for electrical safety and is Underwriters Laboratories (UL) and Underwriters Laboratories of Canada (cUL) Recognized for quality assurance. A press fit is recommended for this heater. This cartridge heater is suitable for a wide range of tool heating applications in the packaging, textile, and paper industries, among others.SpecificationsHeater diameter6.5 mmHeater length80 mmPower rating315WSheath materialEuropean standard 1.4541 stainless steelHeating conductor materialNiCr 8020Maximum sheath temperature750 degrees C (1,380 degrees F)Maximum voltage480V, UL rated to 250VDiameter tolerance-0.02 to -0.06 mmMaximum watt density65W/sq. cm (419W/sq. inch), UL rated to 57W/sq. cmIP ratingIP67Wattage tolerance-10 to +10%High voltage test1,500 VAC at an operating voltage of more than 24V; 500V at operating voltages less than or equal to 24VInsulation resistanceGreater than or equal to 5 megohms at 500 VDCLeakage currentLess than or equal to 0.5 mA at 253 VACLength tolerance-1.5 to +1.5% maximum, -1 to +1 mm minimumStandards metVDE cert...

Manufacturer: Current USA Brand: Current USA

Replacement Current USA Temperature Controller for 1/15 HP Chillers Model 2680 (version 1). Current Part# 2869.

Manufacturer: Dwyer Instruments, Inc. Brand: love

The Series TS3 Digital Temperature Switch is the ideal control for on/off heating or cooling applications. This generation of controls has field selectable engineering units and temperature probe types in order to reduce the combination of parts that need to be stocked. A built-in real time clock is used for HACCP logging of temperature alarms caused by temperature outside of their set limits or loss of power. For refrigeration applications, the defrost cycle can be initiated based on time or using the front panel keys. For programming multiple units, the model TS2-K configuration key can be used to quickly download parameter settings.

Manufacturer: CHROMALOX Brand: Chromalox

NEW CHROMALOX 042-051744-015 HEATER ELEMENT 120V-AC 192W D533596

Manufacturer: Gerbing Brand: Gerbing

Gerbing's Single/Permanent Temp Controller allows you to universally control the temperature of your Gerbing's Heated Apparel. Note: This is best suited for riders controlling 1 heated article. If you plan to eventually get both a jacket, glove, pant etc. we suggest that you purchase the Dual Temp Controller for a better warming experience. Dial in your level of comfort. Digital controller insures that your heated clothing uses only as much power as requested. Wires are UL listed and completely safe, in all weather conditions. Three-Year Warranty. All components except dial and indicator light hidden when mounted. Installs on any accessible panel (some drilling required) Includes complete mounting instructions.