Temperature Controllers - Page 64

Manufacturer: COLE-PARMER Brand: love

These controllers are ideal for on/off control applications where a digital display and an adjustable deadband are needed over a limited temperature range. Use with packaging equipment, food cooling and chilling equipment, wine cellars, and more! Each controller has a tactile front keypad that lets you program 12 different parameters, including set point, deadband, cycle time and ambient probe adjustment. Programmable password protection prevents accidental changes to settings. The bright red, 3-digit LED display is easy to read even in dim areas. What's Included: 1-1/2"(4cm) thermistor probe (100 ohm at 25°C) with 5-ft cable, fitting clips for panel mounting, and manual. Digital display and adjustable deadband for a very economical price Powerful 16 A, SPST relay can run up to a ¾ hp compressor Feature password protection and error messages Include thermistor probe with 5-ft cable

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 862E

Explosion-proof, heavy duty, the Model 862E Thermostat is designed for hazardous-location temperature control. It is the most dependable, smallest, lightest and most durable thermostat available. The 862E is designed to control heating, cooling, or ventilation systems and features an adjustable set point knob for easy and convenient setpoint adjustment. The thermostat incorporates reliable snap action switch operation in SPDT configuration rated to 480 VAC max.

Manufacturer: Titan Controls Brand: Titan Controls

All in one digital lighting timer for use with trigger cord activated lighting systems;Set the preferred lighting schedule for a 24 hour period, then dial in the high temp limit and you're set to go!;Comes with a battery back-up in case of power failure;20 minute delay to avoid 'hot starts' that could damage your bulb;6 foot temperature probe is accurate to within 2Ã'°F

Manufacturer: RANCO Brand: Ranco

' Line Voltage Thermostat, Electronic Temperature Control, Switch Type 2 SPDT, Switch Action Open/Close on Rise, Number of Switches 2, Sensor Type Thermistor, Hardware, Software or System Problems and Displays Different Error Codes for Easy Troubleshooting, EPROM Memory Retains Control Settings During Power Outage, Replaces Most Electromechanical and Electronic Temperature Controls, For Use With Heating, Cooling, Refrigeration, Color Gray '

Manufacturer: Standard Plumbing Supply Brand: Robertshaw Model: ETC-212000-000

The ranco etc is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the etc is one of the most versatile temperature controls available. Unlike many electronic controls, the etc is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. The etc line includes both one and two stage models. On two stage controls, each stage can be set independently thus eliminating the bothersome task of calculating interstage temperatures. And two stage models can be set up with overlapping heating or cooling stages. The etc is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Every etc model is equipped with diagnostic programs that check for hardware, software or system problems and display different error codes to indicate where the trouble is. The etc also has a keypad lockout switch to prevent tampering with the control settings by unauthorized personnel. The etc display temperature may not be calibrated in the field.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-61

The Fluke 61 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -18 to +275 degrees C (0 to 525 degrees F) with an accuracy of + or -2% of the reading or + or - 2 degrees C (+ or -3.5 degrees F), whichever is greater from -1 to +275 degrees C (30 to 525 degrees F) and + or - 3 degrees C (+ or -5 degrees F) outside this range. It has an 8:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-18 to +275 degrees C (0 to 525 degrees F)Infrared sensor accuracyFrom -1 to +275 degrees C (30 to 525 degrees F): + or - 2% of the reading or + or - 2 degrees C (+ or - 3.5 degrees F), whichever is greater; From -18 to -1 degree C (0 to 30 degrees F) + or - 3 degrees C (+ or - 5 degrees F)Display resolution2 degrees C / 5 degrees FDistance-to-spot ratio8:1Power Supply9V or NiCd batteryWeight227g / 0.5lb.Dimensions184 x 45 x 38mm / 7.25 x 1.75 x 1.5 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricit...

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The SERIES 16G, 8G, AND 4G Temperature/Process Loop Controllers allow for monitoring and control of temperature or process conditions. The controller features two independent control outputs for dual loop control using on/off, auto-tune or self-tune PID, fuzzy logic, or manual control methods. RS-485 interface is included with Modbus® communication protocol, for easy bench-top configuration or integration with a PLC or data control system. (Picture shows standard model).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The SERIES 16G, 8G, AND 4G Temperature/Process Loop Controllers allow for monitoring and control of temperature or process conditions. The controller features two independent control outputs for dual loop control using on/off, auto-tune or self-tune PID, fuzzy logic, or manual control methods. RS-485 interface is included with Modbus® communication protocol, for easy bench-top configuration or integration with a PLC or data control system. (Picture shows standard model).

Manufacturer: Autonics Brand: Autonics USA, Inc

Temp Control, DIN W96XH48mm, 1 Alarm,SSRP Voltage Output1, Relay Contact Output 2, 100-240VAC

Manufacturer: Autonics Brand: Autonics USA, Inc

Temp Control, DIN W96XH48mm, 2 Alarm+PV transmission, Relay Contact Output, 100-240VAC