Manometers - Page 7

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: PS106

PS106: Differential Pressure Manometer (6psi) with 11 Measurement Units. High Resolution is ideal for field, manufacturing or lab/R&D use. Manually store/recall 99 readings, Max/Min recording and Relative time stamp. Large LCD display with backlighting, Data Hold and Auto power off with disable. Complete with six AAA batteries, two connection hoses and hard carrying case. Zero function for offset correction or measurement. Complete with six AAA batteries, two connection hoses and hard carrying case

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1230-12-D

SERIES NO. 1230 MANOMETERS (wall mounting type), Have mounting holes for easy installation. They may also be used as portable manometers and can be hung or attached to any vertical steel surface by magnetic mounting clips. All parts are fully visible and readily accessible for cleaning.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: Z300DGC-5

Migration: no migration; zero leakage from high to low port. First marking on the scale: 15 percent of FSD. Sensing element: diaphragm. Wetted parts: diaphragm, body material, SS spring, ceramic magnet. Case material: engineered polymer. Dial size: 2.5 (square), 4.5" (round). Mounting: direct, front flange, 2" pipe and surface mounting. Maximum working pressure: 1500 psi / 100 Bar. Maximum process temperature: 200 degree F. Seals: Buna-N. Lens: Plexiglass (acrylic). Connection: 1/4" NPT(F) Std. Porting: In-line. Over range protection: Up to the maximum from high and low side. Protecting for gauge and switch: NEMA-4/IP65. Applications includes: Filter monitoring, pump performance, level measurement, Flow, flow direction, pressure monitoring, Flow rate, strainer monitoring, condition monitoring of heating/cooling system, Air filter and collector/bag filter monitoring, collector/bag filter monitoring, blower performance.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1230-20-D

SERIES NO. 1230 MANOMETERS (wall mounting type), Have mounting holes for easy installation. They may also be used as portable manometers and can be hung or attached to any vertical steel surface by magnetic mounting clips. All parts are fully visible and readily accessible for cleaning.

Manufacturer: Test Products International, Inc Brand: TPI Model: 665

Temperature compensated to ensure repeatable measurements. -14.5 to 100 PSI range, 0.1 PSI resolution. Over-pressure compensated to 145 PSI. Rugged extruded aluminum housing. Measure positive and differential pressure. Seven units of pressure: inH2O, mbar, kPa, PSI, mH2O, mmHg, inHg. Differential input with +/-100psi range. Data Logging - Record test data with time stamp and display with option-al software. PC Communication: IR to USB Interface and PC Application software. Printing - Print test results directly to the optional A740 IR printer. 5 Digit Dual line LCD with backlight display. Differential 1/4" NPT input type. 0.01 psi (0.001 bar) (0.1 inH2O) resolution. 0.2 percent accuracy. 0.1 percent repeatability. 0.1 percent mean temperature coefficient. 5000 Data, 1sec to 24 hour data logging. 16 data points data storage. IR to USB Interface and PC Application software communication. AA(1.5V) x 2 alkaline battery. 600hour battery life. 20 minutes auto power off.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 840082C

Ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Portable, and weighing only 5 oz. (150 g) including the battery, these meters are convenient for use in the lab, field or factory. Reads gauge, and differential min/max, hold, and auto power off functions. The RS232 port enables communication with a computer. High accuracy of ±0.3% fs at 25ºC, repeatability: ±0.2% (max ±0.5%) FSO, and combined linearity and hysteresis: ±0.2 (Max ±1.0%) FSO. All Sper Scientific Manometers come ready to use with connection hose, instructions, and a 9V battery, in a hard shell carrying case. Comes with a N.I.S.T. traceable certificate of calibration. Dimensions: 7⅛" × 2¾" × 1" (182 × 72 × 30 mm) Weight: 5 oz. (150 g).

Manufacturer: COLE-PARMER Brand: Cole-Parmer

These manometers are for use with noncorrosive gases and air only, not liquids. What's Included: connection hose, 9 V battery and hard shell carrying case. Read gauge and differential pressure in 11 units of measure! Ideal for measuring low differential pressure in clean rooms, test and balance, HVAC, pneumatic systems, and computer peripherals Large backlight LCD, maximum, minimum, hold, and auto power off functions Built-in RS-232 port downloads information to your PC Order cable and software separately from Accessories below

Manufacturer: Sper Scientific

15 PSI Certified Manometer Includes: Connection hose Instructions 9V battery Hard shell carrying case N.I.S.T. traceable certificate of calibration Applications: Low differential Pressure in clean rooms Test and balance Medical equipment HVAC Pneumatic systems Computer peripherals Features: The RS232 port enables communication with a computer. All read gauge, and differential Pressure in up to 11 units of measure Large backlight display Max-min Hold Auto power off functions Portable, and weighing only 5oz (150g) including the battery, these meters are convenient for use in the lab, field or factory. High accuracy of 0.3% fs at 25 C Repeatability: 0.2% (max 0.5%) FSO Combined linearity and hysteresis: 0.2 (Max 1.0%) FSO. 1 Year warranty

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 251-AF

Dwyer Durablock Series 250-AF Gages are precision machined 1" thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002" to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by "O" rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions.

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Window, Manometer, 300 Mm Dps