Anemometers - Page 25

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530862

Fluke sensor magnet mount for handheld vibration tester.

Manufacturer: Ohaus Brand: Ohaus Model: 80000005

The Harvard Trip balance is carefully engineered to provide the accuracy necessary in comparative weighing.

Manufacturer: Brecknell Brand: Salter Brecknell Model: AWT05-506155

The Brecknell SBI-521 digital indicator is housed in a heavy duty stainless steel enclosure rated at IP65 and may be used in a wide variety of applications including bench, floor scale and check weighing.

Manufacturer: CAS Brand: CAS Model: FW500-C(30LB)

FW500 Series brings a whole new standard to the weighing industry by offering a unique design for wash down portion control scales. Perfect for fish markets, food processing plants, and restaurant kitchens where accuracy and dependability matter most.

Manufacturer: Testo AG Brand: Testo Model: 0560 4170

The high quality bearings in the testo 417 yield nearly "friction-free" rotation for direct measurement of air velocity with an NTC sensor used to determine air temperature. The vanes cover all the measured area - no airflow is lost between the vane and outer ring. The 4" head averages true flow over its entire area, not just responding to local stray eddies. Just input the duct cross-sectional area (from 0.2 sq. in. to over 100 sq. ft.) to see accurate, real-time CFM calculations. Simply toggle between velocity, CFM, and temperature readings on the clear, backlit display. Flow direction is indicated by an arrow in the display. timed or multi-point averages are easily accomplished with all parameters and calculations. Mn-Max values can also be displayed. The"Hold" function freezes current readings in the display making data recording easy. Real-time or average CFM, velocity, temperature. True velocity measurement - no air density correction required. Simple one hand operation. Easy to carry and operate. Adjustable A(K) factor (open area of grille). Required for proper systems commissioning. Long battery life. Built-in 3.93" diameter vane. -40 to 185 degree F storage temperature. 32 to 122 degree F operating temperature. 9V battery. 50 hours of battery life. Weight 8 oz. Measures 11" length by 4" width by 1.8" height. ABS housing material. Probe type NTC. 32 to 122 degree F measuring range. Accuracy: +/- 0.9 degree F. Resolution: 0.1 degree F.

Manufacturer: Fluke Corporation Brand: Fluke Model: 709H/TRACK

Fluke Corporation introduces the Fluke 709H Precision Current Loop Calibrator with HART Communications, an affordable, easy-to-use tool with a user-friendly interface and HART capabilities that reduces the time it takes to measure or source, voltage or current, and power up a loop. With its best-in-class accuracy at 0.01 percent reading, the Fluke 709H is ideal for process technicians who need a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool. The Fluke 709H supports a select set of HART universal and common practice commands. In the communicator mode, technicians can read basic device information, perform diagnostic tests, and trim the calibration on most HART-enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with a HART modem. It also features a built-in, selectable 250-ohm resistor to tune the loop for HART communications. The 709H and non-HART 709 models feature an intuitive interface with dedicated buttons, a Quick-Set rotary encoder knob, and simple two wire connection for quick, easy measurements. The dedicated 0-100 percent span and 25 percent step buttons make for quick and easy testing. Ramping and auto-stepping enables technicians to perform tests remotely and be in “two places at once.” The optional 709H/TRACK software with communication cable can document milliamp measurements and HART transmitter parameters and upload to a PC.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700-IV

4-20mA Current shunt. Very accurate current shunt to use for verification and calibration of process control loops. Can be used with accurate voltmeters for calibration purposes. Can be used with Fluke 74X series in mA/mA applications (74X will display mA/mA automatically). 1 year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: MA190

Kit includes 50 ohm BNC insulated feed through terminator, 50 ohm BNC terminator with 10:1 signal attenuation, 1 ohm current shunt for current measurements, safety-designed BNC cable, 1.5m (5'), insulated BNC (f) to 4mm-banana plug adapter, dual 4mm banana receptacles (1 red, 1 black). The MA190 accessory set enables interconnection of the Fluke ScopeMeter 190 series for use in the field of medical imaging and video systems.

Manufacturer: Fluke Corporation Brand: Fluke Model: I1010

The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.

Manufacturer: Fluke Corporation Brand: Fluke Model: I1010-KIT

Kit included i1010 1-600A AC rms, 1-1000A DC current clamp, zippered vinyl carry case with moveable divider. Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.