Anemometers - Page 28

Manufacturer: Think Safe Inc. Brand: First Voice Model: TS-URX-BUNDLE

Get a Life Saving Mobile First Aid Interactive Instruction Guide plus a 6-pack of Urgent Rx Relief Powder To-Go. These ingenious packets are credit card sized and offer 2.5 times faster relief plus don’t require any liquids for administering! They are perfect for anyone on the go. Plus, First Aid course can be accessed with any mobile device or PC and is self-paced and meets national first aid science guidelines. The completion of full interactive course and written test (allows retakes until pass achieved) grants person a 2 year certification. Don’t be left unprepared for everyday or unexpected emergencies. This on-the-go solution easily solves life’s little emergencies.

Manufacturer: Fluke Corporation Brand: Fluke Model: BP120MH

Battery pack as replacement battery in the Fluke 120 series ScopeMeters and in the Fluke 43 and 43B power quality analyzers. The BP120MH is a Nickel-Metal-Hydride battery pack, made specifically to support the ScopeMeters and power quality analyzers mentioned. The battery capacity is 3000 mAh, this is 50 percent more than that of the original BP120. As a results, the instrument-user will benefit from a much longer 'up time' than with the original NiCd battery, at the same volume and weight. The BP120MH is more environmental-friendly than the NiCd battery used before, as it contains no heavy metals. Just as before, the battery pack can be charged while installed in the instrument, using the PM8907 power adapter/charger. Nominal voltage: 4.8V. Capacity: 3000 mAh.

Manufacturer: Fluke Brand: Fluke Model: 4542300

Li-Ion Battery for Fluke Battery Analyzers with 7.4V, 3000mAh.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMC-108-SSV

The Dwyer Rate-Master series RMC flowmeter is a 10" scale air flow meter that has 1/2" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 2% of full scale for precise readings. An integral flow guide stabilizes the float throughout the range for consistent readings. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Models are available for measuring air flow in scfm or scfh. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow. Hardware is included for panel or surface mounting. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices.SpecificationsScale length10"Accuracy+ or – 2% of full scaleConnections1/2" female NPT inlet and outletPressure rating100 psi/6.9 barTemperature rating54 degrees C/130 degrees FWetted materialsBody: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve); float (varies by range): black glass, nickel/copper alloy, stainless steel, or tungsten carbideDimensions (H x W x D)39.05 x 5.72 x 6.35 mm/15-3/8 x 2-1/4 x 2-1/2 inchesWeight1,105.6 g/39 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow wi...

Manufacturer: Fluke Corporation Brand: Fluke Model: 3460387 Color: Yellow

Fluke IR Windows are the most rugged on the market, with a heavy duty aluminum housing and arc-flash resistance to increase safety when conducting thermal inspections. Engineered and tested to withstand electric-arcs up to 50 kA for 30 cycles. Certified by UL and CSA for Type 3/12 (outdoor) environments in North America, these C-Range windows are tested to withstand the long term aging effects of UV exposure. Certified by SIRA Certification IP65 (outdoor) environments in Europe. The CLIRVU coating-exclusive to Fluke IR Windows-seals the optic prior to assembly to protect against moisture degradation. The Quadraband optic is IR-Fusion compatible, allowing the thermographer to see potential problems in visual light and thermographic mode. Each C-Range window is delivered with an identification plate attached for unique, on-site numbering for rapid location confirmation and faster repairs. Each infrared window comes complete with a security access key, installation instructions and self-adhesive drilling template. Maximum temperature: 659 degrees C. Warranty: lifetime replacement against manufacturing defects.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3822018

Fluke sensor cable. 20-feet length.

Manufacturer: Amprobe Brand: Amprobe Model: HD110C

The Amprobe HD110C IP67 digital multimeter is an average-sensing, manual-ranging meter for measuring current, voltage, and resistance in electrical testing applications with high voltage and harsh environmental conditions. The meter measures alternating current (AC) and direct current (DC) to 2 amp, AC voltage to 1,000 volts (V), DC voltage to 1,500V, and resistance to 20 megaohms. The meter comes with a set of detachable high-voltage test leads and two threaded alligator clips for connecting to high-voltage conductors. The meter's molded plastic case is made from flame-retardant thermoplastic to help protect against fire, chemicals, grease, falls, impacts, and abrasions. The case is sealed to prevent water and dirt from entering and it has an ingress protection rating of IP67, meaning it provides complete protection against dust and is waterproof when submerged up to 1 meter. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is a manual-ranging meter and requires that the operator choose the appropriate operating range. The meter has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 1,000V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The meter...

Manufacturer: CAMPELIFY Brand: CAMPELIFY

Specifications: - Wind Speed Measuring Range: 0~30m/s -Wind Volume Measuring Range:0 to 999900㎥/min. - Wind Speed Accuracy:±1%±0.1 - Wind Speed Units: m/s, km/h, knots, mph,ft/min -Wind Volume Units:CMM/CFM - Wind Speed Resolution: 0.01m/s - Temperature Measuring Range: 0~45℃ - Temp. Resolution: 0.1℃ - Data Storage:500 groups - USB Data Connection - Current/Average Measuring;Min&Max Measuring - Range Bar Graph - Celsius/ Fahrenheit Selection - Auto/Manual Power Off;Battery Indication; Backlight Display - Data Hold Function

Manufacturer: UEi Brand: UEi Test Instruments Model: DAFM3

UEi Test Instruments designed the DAFM3 Digital Airflow Meter as a multi-purpose tool to measure Air Velocity, Temperature and Relative Humidity and to calculate Air Volume (CFM, CMM), Dew Point, and Wet Bulb. The critical sensor is carefully housed in the fan and protected by a removable cap. A large LCD display makes the UEi DAFM3 easy to read, the Auto Power Off feature protects battery life and UEi designed the DAFM3 to be easy to use. The UEi DAFM3 is designed to measure up to eight values for Air Velocity and to calculate the Minimum, Maximum, and Average of these readings. The UEi DAFM3 enables the user to solve real-world problems by calculating Air Volume (CFM, CMM) for supply or return air flow using area measurement entered by the user.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530843

Fluke smart battery pack for handheld vibration tester.