Torque Gauges - Page 27

Manufacturer: Tohnichi Brand: Tohnichi Model: 2400ATG-S

Analog Torque Gauge

Manufacturer: Mark-10 Brand: Mark-10 Model: MR50-50Z

Series R50 smart sensors measure bi-directional torque for a wide variety of applications across virtually all industries. Contain a Jacobs chuck for up to 0.5 in [12.7 mm] diameter samples, bits, or fixtures. The sensors can be used as hand held devices, or mounted to a test stand. Capacities available from 10 ozFin to 100 lbFin [7 to 1150 Ncm]. Compatible with Mark-10 model 5i and 3i indicators (sold separately) through unique Plug & Test technology.

Manufacturer: Cedar Brand: Cedar

The DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range is a torque measuring manual screw driver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software. The DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range is a Torque Screwdriver that has an accuracy of +/- 0.5% F.S., +/-1 LSD and has programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Built-in ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.The DID substantially reduces scrap and rework costs by eliminating over and undertightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.

Manufacturer: Schneider Electric Brand: Eurotherm

The Eurotherm Barber-Colman EA51 Medium Torque Actuator is a Non-Spring Return, Slidewire Feedback Actuator

Manufacturer: AWS Brand: AWS

The TT-QC-200z-1/4 Digital Torque Tester, Range 20 - 200 Oz-in, Drive Size 1/4" is a simple bench mount digital torque tester for quick tool verification. Our smallest and lowest cost bench mount torque tester to date, the TT-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metro logy grade tester. A unique rotating display (optional) and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations, and make switching between the two modes almost effortless. It is ideal for switching between pistol grip and inline tool checking. The TT-QC takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.

Manufacturer: AWS Brand: AWS

The TT-QC-25i-1/4 Digital Torque Tester, Range 2.5 - 25 Lb-in, Drive Size 1/4" is a simple bench mount digital torque tester for quick tool verification. Our smallest and lowest cost bench mount torque tester to date, the TT-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metro logy grade tester. A unique rotating display (optional) and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations, and make switching between the two modes almost effortless. It is ideal for switching between pistol grip and inline tool checking. The TT-QC takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.

Manufacturer: Cedar Brand: Cedar

The DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 110V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.

Manufacturer: Cedar Brand: Cedar

The Cedar DIS-IP200 Digital Torque Tester with Flanged Remote Sensor, Capacity 1740 lbf-in/ 145 lbf-ft/ 20 kgf-cm/ 200 N-m, 110V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.

Manufacturer: Shimpo Brand: Shimpo Model: TTC-I-50 Color: Blue

The TTC Digital Torque Tool Tester is a simple operation test instrument for quickly checking torque tool performance up to 800 N-m (590 ft-lb). The TTC Series provides exceptional accuracy for measuring torque on various products including torque wrenches, manual screwdrivers, electric screwdrivers, Pneumatic screwdrivers, and other torque controlled power tools.

Manufacturer: Mark-10 Brand: Mark-10

The Mark-10 TORQ-T-12 Digital Torque Tester for Hand Tools, Capacity 12 lb-in, 2200V is a simple yet accurate solution for testing torque screwdrivers, wrenches, and non-motorized torque tools. Applications exist in manufacturing facilities in virtually every industry. It features a solid aluminum housing, making it rugged enough for many years of service in production or laboratory use, while a universal receptacle with square drive and grooves accepts common bits and attachments. The TORQ-T captures peak torque in both clockwise and counterclockwise directions.