Torque Gauges - Page 38

Manufacturer: Mountz Brand: Mountz

Mountz TLS 1360 F/H (10-120 lblf.in)

Brand: Tohnichi

Analog handheld torque gauge for measuring and tightening in low torque ranges. Additional models also available in equivalent range with different units of measure: 600ATG-S (60~600 kgf.cm.) Metric Unit Model ATG6CN-S (0.6~6 cN.m) SI Unit Model

Manufacturer: AWS Brand: AWS

The AWS RDFA-600 600 Lb-ft Rundown Fixture 3/4 inch Drive is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.

Manufacturer: Mark-10 Brand: Mark-10 Model: AC1036

This calibration kit is designed to permit the field calibration of any Series CTA cap torque tester. The kit contains a complete set of attachments required to mount the tester to a bench, as well as the necessary brackets and cable to mount weights,

Manufacturer: Mountz Brand: Mountz

Mountz CS 50 Torque Sensor (5 - 50 N.m)

Manufacturer: Tohnichi Brand: Tohnichi Model: BTG60Z-S

Analog torque gauge for testing low torque values

Manufacturer: Cedar Brand: Cedar

The DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output , 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range is a torque measuring manual screw driver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software. The DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output , 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range is a Torque Screwdriver that has an accuracy of +/- 0.5% F.S., +/-1 LSD and has programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Built-in ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.The DID substantially reduces scrap and rework costs by eliminating over and undertightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.

Manufacturer: Mountz Brand: Mountz

Mountz QTC 12 Torque Analyzer

Manufacturer: Mark-10 Brand: Mark-10 Model: MR52-10Z

Series R52 smart sensors measure bi-directional torque for a wide variety of applications across virtually all industries. Calibrate torque tools, or use these sensors as components of a torque testing system. Tapped holes on every surface allow for easy mounting to a work bench or fixture. Capacities available from 10 ozFin to 100 lbFin [7 to 1150 Ncm]. Compatible

Manufacturer: Checkline Brand: Checkline

The TSN125 Cam-Over Wrench (1/2" Sq Dr.) is a preset torque wrench that's ideal for maintenance and production applications where over-torque conditions are not tolerated. The use of cam-over wrenches takes the operator influence out of the torque equation and offers more accurate and repeatable results than a standard click type wrench.