Force Gauges - Page 24

Manufacturer: Jonard Brand: Jonard Tools Model: GPP-1

The GPP-1 Push-Pull Force Gauge is a precision, compact tubular-type mechanical force gauge whose slender shape permits its use in confined areas to measure push-pull forces.

Manufacturer: Nextech Global Company Limited Brand: Nextech Model: DFS-H1

Handle for Mounting on Nextech Brand 's DFS-Series Force Gauge

Manufacturer: Shimpo Brand: Shimpo Model: FG-M6SPO10U

The Shimpo M6 thread test stand grip is an accessory for Shimpo force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread.A choice of grip styles is available. The small-pin grip attachment (also called pin grip attachment) has a 22 lb. (11 kg) capacity and is for gripping wires and filaments. The fine-point grip attachment is for gripping fine- to medium-gauge wire, ribbon tape, and paper. The spring-loaded film grip attachment with serrated jaws has a 100 lb. (45 kg) capacity. The spool grip attachment has a 100 lb. (45 kg) capacity and is for anchoring hard-to-hold items such as thread and filaments. The wedge grip attachment has a 100 lb. (45 kg) capacity and has jaws that close on the specimen and tighten as tension is applied for testing wires, strip material, plastic tape, or film. The Jacobs chuck grip attachment has a 100 lb. (45 kg) capacity and is for testing low-gauge wire and rigid rods. The flat chuck grip attachment with serrated faces has a 100 lb. (45 kg) capacity for tensile testing. The tape grip attachment with self-tightening action has a 100 lb. (45 kg) capacity for testing rubber, tape, and paper.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, lev...

Manufacturer: Nextech Global Company Lmited Brand: Nextech Model: DFS5

DFS-Series digital force gauges are cost-effective tension and compression testing tools. Metal housings with large back-lit graphics LCD, these units fit perfectly in your hand. The display can be inverted, for a viewing that suit your testing position. Unit of measurement can be toggled by one simple key. Three modes of operation are easily selectable: Track mode displays live readings, Peak Compression and Peak Tension mode records the maximum reading sensed during the test. The gauge is ready to work without any setup. For a little more advance setup, the plain English language menu provide for simple setup of the instrument to your requirements. In Pass/Fail mode, programmable limits provide visual and audible indication if a test passes or fails. An analog bar graph provides perspective of current reading in comparison to the full scale range. The instruments can log up to several hundred readings at the push of a button. The data can be later viewed on screen, or sent to a computer through USB port. An easy to setup free windows based software program, with USB cable, are provided. DFS-Series are available from 1.1 to 6,600 lb ranges, providing a large testing capacities for various applications. This is an advance force gauge that suit both simple and professional application.

Manufacturer: Checkline Brand: Checkline

The LP-99 Lexan Safety Shield is a safety shield that offers protection to the operators of motorized test stands. Access to the test stand controls is still available through the front of the shield. Made of 1/4" lexan, it is virtually unbreakable and will contain the debris from destructive testing. Helps to prevent accidental injuries. Fits all Imada motorized vertical test stands. Dimensions 16.5" x 15.75" x 31.5"

Manufacturer: Mark-10 Brand: Mark-10 Model: M2-10

Series 2 digital force gauges are designed for basic tension and compression force testing applications up to 100 lbF (500 N). Peak tension and compression readings are reliably captured via the gauges’ ±0.5% accuracy and 500 Hz sampling rate. A backlit graphic LCD displays the current, peak tension, or peak compression reading. The gauges are overload protected to 150% of capacity. An ergonomic, reversible aluminum housing allows for hand held use or fixture mounting, rugged enough for applications in both production and laboratory environments. Series 2 gauges are directly compatible with Mark-10 test stands and grips.

Manufacturer: Shimpo Brand: Shimpo Model: MF-1KG

The Shimpo MF series peak-hold analog force gauge measures tensile (pull) or compression (push) forces in quality control and process control applications. This analog dial gauge shows measurements in kilograms (kg) and can display the present force measured in real time or the maximum (peak) force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has an overload capacity of 75 kg. A push button on the gauge resets the peak reading for repetitive testing applications. The gauge comes with one hook, one chisel, one flat head, one notched head, one cone head, one large hook, and one large V-hook attachment that screw onto the sensor shaft for conducting tests on a variety of devices. It also comes with an extension rod for increasing the reach of the gauge's sensor. The gauge's body is constructed from die-cast aluminum, which resists wear. The meter measures 9.06 x 2.36 x 2.05 inches (230 x 60 x 52 mm, H x W x D, where H is height, the vertical distance from lowest to highest point; W is the width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back) and can be held in one hand during use. It comes with a carrying case that helps protect the gauge during transport and storage.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used i...

Manufacturer: Jonard Brand: Jonard

ASIN: B002E7XBKS Product Name: Dynamometer Gauge, Dial, 10-100g Manufacturer: Jonard Brand Name: Jonard

Manufacturer: Mark-10 Brand: Mark-10 Model: G1070

General purpose vise, for a wide range of tension and compression testing applications. Self-centering, replaceable jaws can be field-modified to improve sample gripping characteristics.

Manufacturer: Mark-10 Brand: Mark-10

6" [150 mm] travel, 0.0005" [0.01 mm] resolution, SPC output for automated data collection. Requires travel stops kit. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter. Note: continuous data output rate is limited to 2 Hz.