Data Loggers - Page 9

Manufacturer: Supco Brand: Supco Model: VLT4115

The VLT Loggers are feature packed, strip recorder/alarm devices. Models with 1 to 4 channels to monitor temperature, humidity or switches with programmability for each. The Large digital display, PC Interface without additional software. Monitoring, logging, alarms and printing in real time. Up to 4 input channels of temperature, humidity and switches. Reading intervals from 1 to 120 minutes, 1 minute increments. Over and under alarms plus delay setting for each channel Operating and setting by means of 6 function keys. Printed help and instruction messages on request during unit setup 1 channel printing in auto scale graph mode, including alarms. 1 to 4 channel printing full reports in 3 text modes, including alarms. On line display/minimum or maximum on request. Exporting real time data thru RS-232 PC portno software needed. F or C degrees. Battery back up. Low battery, chart end and probe error indicators and alarms buzzer. Remote alarm output via relay contacts of 0.5A, 115V. Remote probes 33’ (10 meters) cable length, extendible up to 100. Data and settings retained after power failure. Base unit operating humidity: 0 to 95 percent RH, non-condensing. Measuring options: Any combination of temperature and switches up to 4 channels. Operating Temperature Range: 32 to 140 degree F (-0 to 60 degree C) with alkaline battery, 0 to 150 degree F (-18 to 65 degree C) with lithium battery. Operating humidity: 0 to 95 percent RH, non-condensing. Storage temperature: -40 to 150 degree F (-40 to 65 degree C). Battery back-up: 9 volt. Clock battery: 3.6 volt lithium. Input: 115 VAC. Measures 8-3/16" length by 5-19/64" width by 2-11/16" height. Weight: 2.6lbs (1.8 kg).

Manufacturer: Reed Brand: REED Instruments Model: SD-4214

This SD series datalogging thermo-anemometer measures air velocity, air temperature and has a built-in contact thermometer. The SD-4214 features user selectable sampling rates from 1 to 3600 seconds. Using an SD card (max 16Gb) a user can select a desired sampling rate and quickly generate an Excel file without the use of software. Optional accessories include a tripod and AC adapter for continuous long-term monitoring. Optional PC software also allows a user to track live measurements.

Manufacturer: Sichiray Technology Co., Ltd. Brand: Sichiray

OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked. Power up this device and it will start logging any received serial data at 9600bps. Sending Ctrl+z three times will drop out of logging and in to command mode. 'new' will create a new file. 'md' makes a directory. '?' brings up the list of commands. OpenLog doesn't do a lot, but it does log serial streams extremely well. Features: Log to low-cost microSD FAT16/32 cards up to 16GB Simple command interface Edit config.txt file from a computer to change baud rate and other system settings Three modes: NewLog creates a new log every power up and immediately starts logging SeqLog appends a file called "SeqLog.txt" at every power up and immediately starts logging Command mode starts OpenLog at a command prompt at power up Configurable baud rates (2400 to 115200bps) Configure unit through config file or the menu system Power, ground, and RX-I are the minimum connections Reprogrammable ATmega328 using the Arduino IDE Two LEDs indicate writing status Input voltage from 3.3V to 12V 2mA idle, 6mA at maximum recording rate Dimensions: 0.16 x 0.6 x 0.75" (4 x 15 x 19mm) Documents: Example Arduino Sketches Command Set Datasheet Datalogger comparison Schematic

Manufacturer: LabJack Brand: LabJack

The Digit-TL is a battery powered temperature logging device, which collects data in a remote location, and stores it to internal memory. When finished, the data can be downloaded via the convenient USB connector. Traditional applications include shipping, weather monitoring, agriculture, and refrigeration. The miniature size makes it convenient for logging temperature on-the-go. Take it backpacking, or throw it in the glove box to see how temperature changes over time. Every data point is given a timestamp, so it is possible to see when temperature changes occur, and with 7 different log intervals, it is easy to customize how frequently data points are collected. Use the 2 programmable alarm thresholds to detect if temperatures exceeded permissible boundaries, such as in a refrigerator. On connection to USB, the red LED will illuminate if there was a problem, and the green LED will illuminate if there were no problems. One unique feature to this data logger is the included ambient light sensor. Although not a calibrated light measurement instrument, it can be used to detect the time of sunrise/sunset, lights on/off, or even open/closing the refrigerator door.

Manufacturer: Omega Brand: Omega

The Type K High-Temperature Stainless-Steel Probe offers a 30cm (12) 304 stainless-steel probe only 0.5cm (3/16) in diameter mounted on a 2.5cm (1") handle with spring-type strain relief and a full 1.8m (6 foot) 19-AWG cable with isolated thermocouple color-coded for type K (yellow) thermocouples according to the ANSI standard. With a stated response range of 0C to 900C (32F to 1650F) this probe is rated up to 1235C (2282F) for one-hour exposures.

Manufacturer: DENT Instruments Brand: DENT Instruments Model: TOUL-4G

The SMARTlogger series of instruments are designed to monitor the on-off status and total time of use data. SMARTloggers provide the operating schedule for energy-consuming devices or systems. Models are available for lighting systems, motor loads, or virtually any electric load generating at least .25 amps. Professional installation is not required to use these small, robust loggers. Each one provides powerful data for superior energy management.The new TOUL-4G Lighting Logger is an ultra small, battery powered, portable logger used for lighting energy audits. It has a built-in photocell to monitor lighting and a sensitivity adjustment to eliminate daylighting and ambient lighting. On/Off transition times are recorded and stored in the TOUL-4G. Incredibly small (6.3 x 3.8 x 1.9 cm (2.5 x 1.5 x .75") comes with integrated earth magnets to hold the units in place. Never needs charging, comes with a built-in battery.

Manufacturer: Lascar Brand: Lascar Model: EL-USB-4 Color: Black

This data logger measures and stores up to 32, 000 current loop readings over a 4-20mA D.Sc. measurement range. The data logger features a pair of screw terminals and is supplied complete with flashing red and green LEDs. The user can easily set up the logging rate and start time, and download the stored data by plugging the module straight into a PCs USB port and running the purpose designed software under Windows 2000, XP, Vista & 7. The data can then be graphed, printed and exported to other applications.

Manufacturer: Onset Computer Corporation Brand: Onset

The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The HOBO UX90-001 State Logger is available in a standard 128 KB memory model (UX90-001) capable of 84,650 measurements and an expanded 512KB memory version (UX90-001M) capable of over 346,795 measurements.

Manufacturer: Onset Computer Corporation Brand: Onset

The HOBO Motor On/Off data logger records motor on and off conditions within an AC magnetic field with its internal sensor, or mechanical contact closures from external sensing devices. This logger is ideal for tracking the usage & runtimes of motors, pumps, compressors, and other equipment. The HOBO UX90-004 Motor On/Off Logger is available in a standard 128 KB memory model (UX90-004) capable of 84,650 measurements and an expanded 512KB memory version (UX90-004M) capable of over 346,795 measurements.

Manufacturer: Lascar Brand: Lascar Model: EL-USB-1-PRO Color: Silver

The EL-USB-1-PRO data logger measures and stores up to 32, 510 temperature readings over the -40 to +125ºC (-40 to +257ºF) measurement ranges. The logger is housed in a stainless steel case to protect the logger from corrosion, impact and moisture (to IP-67). A long life lithium battery is included which allows logging for up to 3 years.