Pressure Transmitters - Page 32

Manufacturer: APG Brand: APG

General purpose pressure sensor that offers reliable and accurate measurements under harsh conditions.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: K17M0242C13000#

The Ashcroft K1 is a proven and versatile pressure Transmitter incorporating polysilicon thin film technology. Modern low-pressure chemical vapor deposition methods provide simple, stable molecular bonds between the metal diaphragm and a polysilicon strain gage bridge. There are no epoxies or bonding agents to contribute to signal instability or drift. The integral metal diaphragm and polysilicon bridge are virtually unaffected by shock, vibration or mounting. These transmitters are offered in many standard pressure ranges with either current or voltage output signals. Transmitter performance is directly traceable to the National Institute of Standards and Technology. A calibration test certificate is available with each transmitter

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Dwyer® Series 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X stainless steel general purpose housing or cast aluminum conduit housing. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in ranges of vacuum, compound to 5000 psi with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

Manufacturer: Linear Brand: Linear

This item is brand new

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Transducer Range 0 to 100 psi Accuracy +/-0.5% Full Scale Output 4 to 20 mA at 12 to 30VDC Power Required 9 to 36VDC Process Connection 1/8 NPT Male Electrical Connections 1/2 Conduit Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 200 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 634ES-0

Series 634ES Transmitters sense a single pressure for air, compatible gas or liquid and provide 4-20 mA output signal. Positive pressure can be measured within an accuracy of ±0.5% of span. The Series 634ES uses an isolated piezoresistive pressure sensor to produce a resistance change across a wheatstone bridge. Convenient 2-wire operation simplifies installation. Zero and span adjustments are fully protected inside a rugged die cast aluminum housing with durable gray polyurethane finish. Enclosure is designed to meet NEMA 4X requirements.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: A4SBM0242D0100#G

The Ashcroft A4 pressure transmitter is ideal for a broad spectrum of pressure sensing requirements where Intrinsically Safe or Non-Incentive hazardous location ratings are required. The Ashcroft A4 is designed and manufactured to provide the user with accurate, reliable, and stable output data. This is accomplished through the use of an on board microprocessor, that is programmed during a unique digital compensation process, to provide extremely linear and precise performance over the entire specified pressure and temperature range.

Manufacturer: Winters Brand: Winters Model: LE360

Applications: suitable for all process and automation control, hydraulics and pneumatic sensing, pump and compressor monitoring, refrigeration and HVAC. Specifications- output signal: standard 2-wire: 4-20 mA/Vs = 8-32 Vdc. Accuracy: +/-0.5 Percent FSO. Permissible load: 2-wire: rmax = [(Vs - Vs min)/0.02] Ohm, 3-wire: rmin = 10 kOhm. Influence effects: supply: 0.05 Percent FSO/10 V, load: 0.05 Percent FSO/kOhm. Response time: 2-wire:

Manufacturer: ROSEMOUNT Brand: Rosemount

ROSEMOUNT 1151GP4S22B2 SMART -40-100IN-H2O PRESSURE TRANSMITTER D515255

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 621-1000-1-1-2-6

The NOSHOK series 621 pressure transmitters combine the reliability and long life of diffused semiconductor and sputtered thin film strain gage sensors with safe electronics for outstanding performance and value. These transmitters were designed for applications that require pressure measurement in hazardous environments. All wetted parts are made of stainless steel and elgiloy welded with no internal O-rings, gaskets or seals. Units undergo extensive testing during the manufacturing process to ensure that the highest performance is achieved in the demanding environments found in today's applications. The transmitters are available with a standard threaded connection as well as a flush diaphragm configuration and are factory mutual approved. Models incorporate significant levels of RFI, EMI and ESD protection. Ideal for hydraulic and pneumatic systems, pumps and compressors, test equipment and systems, HVAC systems, power generation, water and wastewater, refrigeration equipment, laboratory and test equipment, chemical/petrochemical, marine, pipeline gas compressors, oil field and offshore applications. Accuracy: +/-0.25 percent full scale (BFSL). Hysteresis: less-than equal to +/-0.1 percent full scale. Repeatability: less-than equal to +/-0.05 percent full scale. Stability: less-than equal to +/-0.2 percent full scale for 1 year, non accumulating. Load limitations: less-than equal to (VPower-10)/0.020 Amp for 4 mA to 20 mA. Zero/Span offset: less-than equal to +/-0.5 percent full scale. Response time: less than 1 ms (between 10 percent and 90 percent full scale). Durability: greater-than 100,000,000 full scale cycles. Housing material: 316 stainless steel. Environmental rating: NEMA 4x (IP67). Electrical rating: Reverse polarity, over-voltage and short circuit protected. Shock: 1000 g's according to IEC 770 for mechanical shock. Output Signal: 4 mA to 20 mA 2-wire. Power Supply: 10 Vdc to 30 Vdc unregulated. Load limitations: