Pressure Probes & Sensors - Page 42

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FHG33J52X

This Square D Pumptrol 9013FHG33J52X air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 125 psi. The switch has a 3/8" NPSF internal fluid connection and is suitable for use with a higher-horsepower motor with 2 hp or greater. The non-adjustable differential is 30 psi, and the adjustable cut-out range is 70-150 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a 2-way pressure release valve. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Panasonic Brand: Panasonic

Board Mount Pressure Sensors 200 kPa 5 mm Pressure Sensor DIP

Manufacturer: SQUARE D Brand: Square D

' Pressure Switch, Factory On/Off Setting 135/175 psi, Differential 40 psi, Range 60 to 200 psi, Port Type 4-Port 1/4 In. FNPS, Manual Switch Action Auto/Off, Contact Form DPST, Action Standard, Application Air Compressor, Unloader 1/4 In. Compression, NEMA Rating 1, Series 9013FHG, HP @ 1 Phase - 120V 1-1/2, HP @ 1 Phase - 240V 2, HP @ 3 Phase - 240V 3, HP @ 3 Phase - 480V 1, Temp. Range -22 Degrees to 257 Degrees F '

Manufacturer: ROHM Brand: Rohm

ROHM BD5227G-TR VOLTAGE DETECTOR, 800NA, 10V, SOT-23-5

Manufacturer: Siemens Brand: Siemens

The Flush Mount Room Temperature Sensor provides sensing of room temperature to the Siemens room controller products. The sensor¡¯s resistance varies with the actual room temperature being measured. The sensor connects to the controller via a 2-wire pigtail connection. The Metal Flush Mount Room Temperature Sensor incorporates a temperature-sensing element (10K Ohm Type II thermistor, 100K Ohm thermistor, or 1000 Ohm RTD) behind a blank, stainless steel switch cover plate. The Flush Mount Room Temperature Sensor is designed for those applications in which a covered room temperature sensor is not acceptable. Features: Tamper-proof screws Can be painted after installation Designed for mounting to a 2 x 4 electrical box Brushed stainless steel finish Note: Image may not be actual representation of item.

Manufacturer: MICROCHIP Brand: MICROCHIP

MICROCHIP TCM810JVNB713 IC, RESET MONITOR, 4.00V, SOT23B

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors 0 to 100psig 5VDC UNAMP GAGE 4.1 kOhm

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1910-0

Our most popular series combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, Series 1900 switches have set points from 0.07 to 20" WC (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved.

Manufacturer: Honeywell Brand: Honeywell

Industrial Pressure Sensors PRESSURE SWITCH

Manufacturer: Honeywell Brand: Honeywell

Industrial Pressure Sensors PRESSURE SWITCH