Pressure Probes & Sensors - Page 63

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors Dip,Dual Radial Barb 10mBar Differ,3.3V

Manufacturer: SanitGrasp Brand: SanitGrasp Color: Stainless Steel, Brushed Finish

The SanitGrasp SG-101 Hygienic Door Handle allows your patrons to open restroom doors without actually touching them! The US & internationally patented design makes it easy for any user to slip their arm into the opening and pull. Their hand never comes into contact with the door handle, and so never touches any germs that may be residing on that handle.

Manufacturer: Aircraft Tool Supply Brand: Aircraft Tool Supply

The Model 2EM Differential Cylinder Pressure Tester combines the features of our popular 2E tester and a Master Orifice into one tool. Now you can conveniently check your engine s leakdown rate against a calibrated standard in accordance with Continental s Service Bulletin SB03-3. Includes hose, plug adapter, and complete instructions. Comes with complete instructions. Includes hose and spark plug adapter. Factory calibrated. Letter of certification available upon request. Note: For use with engines of 5" Bore Diameter or smaller per AC43.13 REV 1B. For larger engine bores, see p/n 2EM-60. Protective form-fitted hard case included

Manufacturer: ANALOG DEVICES Brand: ANALOG DEVICES

ANALOG DEVICES ADM812RARTZ-REEL7 SUPERVISOR CIRCUIT, MPU, #1, SOT-143-4

Manufacturer: APG Brand: APG

The PG7 digital pressure gauge is environmentally sealed with an IP67 rating. This rugged gauge can be used both indoors and out, and is designed to handle a beating.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FSG2J20

This Square D Pumptrol 9013FSG2J20 electromechanical pressure switch with 20-40 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 15-30 psi and the cut-out range is 20-65 psi. The cover is black. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FSG52J25M4

This Square D Pumptrol 9013FSG52J25M4 electromechanical pressure switch with 60-80 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 20-30 psi and the cut-out range is 25-80 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FSG52J33M4

This Square D Pumptrol 9013FSG52J33M4 electromechanical pressure switch with 50-70 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 20-30 psi and the cut-out range is 25-80 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Automation Components Inc. (ACI) Brand: Automation Components Inc. (ACI)

A/R-PUP | ACI | Pressure Sensor Transducer Pickup Ports

Manufacturer: Automation Components Inc. (ACI) Brand: Automation Components Inc. (ACI)

A/R2-PUP | ACI | Pressure Sensor Transducer Pickup Ports