Pressure Probes & Sensors - Page 86

Manufacturer: Icstation Brand: Generic Model: HX711

Manufacturer: IP Brand: Industry Park

Specification: The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, and particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization and bipolar processing which provide an accurate, high level analog output signal that is proportional to the applied pressure. In addition, with an offset specifically at 2.5V instead of the conventional 0V, this new series allows to measure pressure up to 7kPa through each port for pressure sensing but also for vacuum sensing (refer to the transfer function in the data sheet for more detailed information). Features: -2 to 2 kPa (-0.3 to 0.3 psi) 0.5 to 4.5 V Output Weight: 0.1oz; 4g Please see it to know more:http://code.google.com/p/ardupilot-mega/wiki/Airspeed Package Content: 1Pcs*Differential Pressure Sensor Board 1Pcs*Free cables

Manufacturer: Icstation Brand: IS Model: 100kg Pressure Sensor Resistor Film

This is a single-zone Force Sensing Resistor optimized for use in human touch control of electronic devices such as automotive electronics, medical systems, and in industrial and robotics applications. It has a 10mm/0.39" diameter active area(FSR) to converter the presure into the resistance then output. Higher the pressure, lower the resistance it will output with 100kg measuring range widely used in the biomimetic robot, mechanical gripper arm,smart wearable devices. Specifications: Overall Length: 1.89" Overall Width:0.63" Sensoring Area Diameter: 0.39" Sensoring Force Range: 0-100kg Package Included: 1X 100kg Thin Film Pressure Sensor

Manufacturer: Panasonic Brand: Panasonic

Board Mount Pressure Sensors 34.3kPa 0.35kgf/cm Pressure Sensor

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FHG2J27

This Square D Pumptrol 9013FHG2J27 air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 100 psi. The switch has a 1/4" NPSF internal fluid connection and is suitable for use with a lower-horsepower motor with 1.5 hp power or less. The non-adjustable differential is 20 psi, and the adjustable cut-out range is 40-100 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a 2-way pressure release valve. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FSG9J24

This Square D Pumptrol 9013FSG9J24 electromechanical pressure switch with 40-60 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPT external fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 15-30 psi and the cut-out range is 20-65 psi. This switch includes slip-on connectors (line and load terminals). The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FSG9J21M4

This Square D Pumptrol 9013FSG9J21M4 electromechanical pressure switch with 30-50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPT external fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 15-30 psi and the cut-out range is 20-65 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: MULTICOMP Brand: Multicomp

MULTICOMP PSF109S-81-330 PRESSURE SWITCH, VACUUM -2.9 TO -11.9PSI

Manufacturer: Euroswitch Brand: Euroswitch

Euroswitch 2111122TL-L0 Pressure Switch, 1/8" NPT

Manufacturer: Dwyer Brand: Dwyer

HVAC Differential Pressure Switch, 0.08 to 1.20" w.c. Adjustable SetPoint Range, SPDT Switch Type, 1.5A @ 250VAC Rating, 20 x 1.5 Cable Strain Relief Electrical Connection, Auto Reset, 2 Static Probes and 7ft. PVC Tubing