Hardness Testing Equipment - Page 27

Manufacturer: Rex Brand: Rex

The RX-CLW-OO Constant Load Weight for OO and OOO Durometers is designed to slide onto the lower barrel of the gauge to give it a wider foot, and raise the mass of the gauge to the suggested 1k.A common error when using a durometer is to imbed the foot of the gauge into the specimen by pressing down with excessive force. This standard states that for types A, B, and O the gauge should be pressed onto the specimen with a load of 1 kg. The Constant Load Weight for gauges with an 822g springload (types A, B, O) slides onto the lower barrel of the gauge, gives it a wider foot, and raises the mass of the gauge to the suggested 1kg. With the load weight on the gauge, all the user has to do is set the gauge on the test specimen - no further pressure is necessary. Thus the Constant load weight eliminates the human error that would otherwise occur due to users pressing on excessive or inconsistent force. Constant Load Weights are precision CNC machined from stainless steel and are polished and calibrated by skilled craftsmen. in the USA. As stated above, a common error when using a durometer is to imbed the foot of the gauge into the specimen by pressing down with excessive force. All Rex instruments are made in accordance with ASTM D-2240. This standard states that for types OO and OOO the gauge should be pressed onto the specimen with a load of 400g. The Rex Constant Load Weight for the type OO and OOO gauges screws onto the top of the gauge and raises the mass of the gauge to the suggested 400g.

Manufacturer: GSS Brand: GSS

GSS Original Tablet hardness tester Lab Equipment (Advance)

Manufacturer: Tathastu Brand: Tathastu

Tathastu Original Tablet hardness tester Lab Equipment (Advance)

Manufacturer: Rex Brand: Rex

The TBK-D Type D Durometer Test Block Kit is designed to give the user the ability to develop the proper "feel", and, while they are not to be used for calibration purposes, they enable the user to perform a quick check for proper durometer operation. A large variation would indicate the need for recalibration of the durometer being utilized. This should be done in accordance with the methods indicated in ASTM D-2240. The kit consists of color coded test blocks each of which measures " x 2" x 2". The kit is supplied in a sturdy foam-fitted carrrying case with the true readings for each block on the inside cover of the case. At an additional cost, a certificate of conformance is also available for users who need documentation of tracibility to NIST. Single test blocks for other durometer scales are also available.

Manufacturer: HHIP Brand: HHIP Model: 8902-0151

C Diamond Penetrator for 8902-0150 Hardness Tester ~ 120 Degree ~ Fits part #8902-0150.

Manufacturer: Markal Brand: Markal Model: 96243 Color: 12 Black

TRADES-MARKER has the marking versatility of a paper-wrapped grease pencil combined with simple push-button advance that helps reduce waste. This refillable, all-surface marker leaves a wear-resistant mark and is safe for all surfaces.

Manufacturer: COLE-PARMER Brand: Rex Gauge

These durometers are available in type A for use with soft rubber plastics and elastomers; type D for use with hard rubber and plastics such as thermo plastics and flooring; and type micro A for materials as thin as 0.03". Models are also available with NIST certificate. Pocket Durometers are unbreakable, lightweight, and easy to carry around the plant for on-site testing. The sliding vernier scale is easy to read and has no cams, gears, or levers to wear out. The scale is divided into 5 point increments from 0 to 100. Scale holds maximum reading making it ideal for testing hard-to-reach areas. Measure 1/2"W x 4-1/2"H. Did you know... Type A has a flat cone point 35° included angle. Type D has a sharp cone point 30° included angle. Type Micro A has a sharp cone point 30° included angle. An easy way to test hardness of rubber, plastic, and other nonmetallic materials

Manufacturer: HH

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Description HLX-AC rubber hardness test rack is dedicated to support the LX-A, LX-C hardness tester, the test principles of science, compact structure, reasonable, so that the stability and accuracy of the test had been further improved. And the use of high hardness metal platform instead of the traditional glass platform, effectively avoids the disadvantages of the fragile glass platform Technical parameters Model : LX-A hardness tester Maximum range(mm):0-100 Recommended testing range(mm):10-90 Size(mm):115x60x25 Pressure needle stroke(mm):2.5 Size of pressure pin head:Φ5mm Weight:0.5kgs Model:test stand Size(mm):100*212*250 Weight(kgs): 10 NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: tereninstruments Brand: tereninstruments

We use DHL and Fedex. Generally, it only needs 3 days to arrive America from China. The lead time is about 1-3 business days.Applications: Used to determine the indentation hardness of materials ranging from cellular products to rigid plastics. Features: Use "USB data output" and "RS-232 data output" to connect with PC. (Optional) Provide "Bluetooth TM data output" choice. Model Informations: Model C: Indenter: 0.79 Truncated (Frustum) Cone Tested Materials: Plastics and Middle Hard Rubber Materials Hardness Value: Above 90 B, Below 20 D Parameters: Parameters Displayed: Hardness Result, Average Value, Max. Value Measurement Range: 0 ~ 100 H Measurement Deviation: less than 1% H Resolution: 0.1 H Battery Indicator: Low Battery Indicator Operating Conditions: Temperature: 0 ~ 40 Degree; Humidity: 10 ~ 90 %RH Power Supply: 4 x 1.5 V AAA Size (UM-4) Battery Dimensions: 162 x 65 x 28 mm Weight: 170 g Package includes: 1* Main Unit 1* Carrying Case 1* Operation Manual 1* Pin Length Test Block Optional Accessories 1. Rubber Hardness Test Block (A / D Type ) 2. USB, RS-232C data cable with software 3. Bluetooth data out put with software

Manufacturer: Phase II Plus Brand: Phase II Plus Model: MET-U1A

Ultrasonic Contact Impedance is a hardness testing method based on the measurement of the frequency shift of a resonating rod caused by the essentially elastic nature of the finite area of contact between the indenter and the test piece during the penetration. Described as a hardness testing practice using a calibrated instrument by pressing a resonating rod with a Vickers style Diamond indenter with a fixed force against the surface of the part to be tested.