Hardness Testing Equipment - Page 8

Manufacturer: Flexbar Brand: Flexbar

MicroinchTM; Comparator Plates. Surface Roughness (Texture) Comparison Standards Made of solid Electroformed Nickel. The Largest variety of Standards available for assessing and specifying, by Symbol, the Degree of Roughness. of Machined parts - including every machining method known. every obtainable value. 17 Different Sets available. Each value Size is 16mm x 25mm (or 5/8" x 1"). Overall dimensions of each plate 25mm x 128mm (or 2-1/16" x 5"). Light in weight - Can be carried in Pocket. Supplied in Plastic wallet. Model No. 16009, Surface Grinding Comparator Maching Method: surface Grinding No. of Specimens: 8 Range Ra µm: .025-3.2 Range AA µ": 1, 2, 4, 8, 16, 32, 63, 125 N Numbers: 1-8. Manufactured to ANSI-B-46.1-1985 . Each Set is supplied in rugged vinyl Case which contains a durable instruction card With valuable information in easily understood language. This enables the user to obtain best results when assessing Roughness or Finish by sight and touch. All 18 plates conform to S.A.E. and Mil specs.

Manufacturer: Flexbar Brand: Flexbar

MicroinchTM; Comparator Plates. surface Roughness (Texture) Comparison Standards Made of solid Electroformed Nickel. The Largest variety of Standards available for assessing and specifying, by Symbol, the Degree of Roughness of Machined parts - including every machining method known every obtainable value. 17 Different Sets available. Each value Size is 16mm x 25mm (or 5/8" x 1"). Overall dimensions of each plate 25mm x 128mm (or 2-1/16" x 5"). Light in weight - Can be carried in Pocket. supplied in Plastic wallet. Model No. 16014, Reaming/Drilling Comparator Maching Method: Reaming & Drilling. No. of Specimens: 8. Range Ra µm: 0.4-12.5 Range AA µ": 16, 32, 63, 125 Reaming, 63, 125, 250, 500 Drilling N Numbers: 5-10. Manufactured to ANSI-B-46.1-1985. Each Set is supplied in rugged vinyl Case which contains a durable instruction card With valuable information in easily understood language. This enables the user to obtain best results when assessing Roughness or Finish by sight and touch. All 18 plates conform to S.A.E. and Mil specs.

Manufacturer: Flexbar Brand: Flexbar

MicroinchTM; Comparator Plates. surface Roughness (Texture) Comparison Standards Made of solid Electroformed Nickel. The Largest variety of Standards available for assessing and specifying, by Symbol, the Degree of Roughness of Machined parts - including every machining method known. every obtainable value. 17 Different Sets available. Each value Size is 16mm x 25mm (or 5/8" x 1"). Overall dimensions of each plate 25mm x 128mm (or 2-1/16" x 5"). Light in weight - Can be carried in Pocket. supplied in Plastic wallet. Model No. 16010, Cylindrical Grinding Comparator. Maching Method: Cylindrical Grinding. No. of Specimens: 8. Range Ra µm: .025-3.2. Range AA µ": 1, 2, 4, 8, 16, 32, 63, 125 N Numbers: 1-8. Manufactured to ANSI-B-46.1-1985. Each Set is supplied in rugged vinyl Case which contains a durable instruction card With valuable information in easily understood language. This enables the user to obtain best results when assessing Roughness or Finish by sight and touch. All 18 plates conform to S.A.E. and Mil specs.

Manufacturer: Mineralab Brand: Mineralab Model: HD2

This tool is used in industry to determine the Hardness of a material according to the Mohs scale. The kit contains 8 different Mohs' Hardness Points, from Mohs 2 through Mohs 9. These points are used in a "scratch test" on the material. For example, if the number 6 point scratches a particular material, but the number 5 point does not, then your material has a Mohs' Hardness value of about 5.5. A common use of this tool is in Concrete Hardness Testing to guide the technician in selecting the optimal abrasive to use in the concrete polishing. Other examples of industrial use of this Mohs' Hardness Test Kit - on touch screens, faucet finishes, and countertop materials. This kit comes packaged in a rugged molded Plastic Case with permanent Instructions, along with a Mohs' Hardness Table of common natural and man-made materials.

Manufacturer: GSS Brand: GSS

GSS Tablet Hardness Tester Pfizer Type A handy,tough and direct dial reading MGSS 8

Manufacturer: TTC Brand: TTC

No need to bring materials to a hardness testing machine; just bring this file set to the piece that needs to be tested.

Manufacturer: TTC Brand: TTC

TTC Dial Shore Durometers Type: Shore D test harder materials such as rubber, acrylic, glass.

Manufacturer: Fowler Brand: Fowler

Includes plastic wallet Fowler's Hardness Tester File Set is an inexpensive, easy-to-use method for determining material hardness by sliding the file across the object's surface. Six color coded files indicate hardness from 40 to 65 HRC. Conveniently packaged in a leather-like case with a velcro lined flap, the files are approximately .157" in diameter and 7" in length (4.3 x 175mm). Testing Procedure Run the Black file (65 HRC) over test material. If it marks the material, the material is less than 65 HRC. Try the Blue file (60 HRC). If it does not mark the material, it indicates that the file is softer than the material and is between 60 and 65 HRC. If the Blue file (60 HRC) marked the material, continue testing with the Green (55 HRC), Light-Green (50 HRC), etc. until the material is not marked. The approximate hardness of the material is between the file that marks the material and the file that slides over the material. Included chart also shows the appropriate Vickers Hardness (HV).

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 0090-2000

Total Length 1-3/32"=28mm Length include the steps is 43/64"(17mm), shank= 25/64" (10mm) Exact and precise readings Unmatched quality Provides micro finish Free from errors High on performance Long working life Ensures reliable performance C SCALE MEASURE

Manufacturer: Baoshishan Brand: Baoshishan

Description LX-C hardness tester is used in measuring the hardness of oak model micro porous material which includes vesicant when the compression ratio is 50%, the stress above 0.5kg/cm2. It also can be used in other similar hardness materials.  Technical Datas Dial value: 0 ～ 100HA  *Needle stroke: 2.5 mm  *Measure range: 10 ～ 90HC  *Needlepoint size: SR 2.5 mm  *Weight: ～ 0.5 kg Note All products have been checked and packaged in good condition before shipping. After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution.