|
|
-
3.5 of 5.0 with 20 Reviews
SALE PRICE: $122.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613755-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613755-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Jo...
-
3.5 of 5.0 with 2 Reviews
SALE PRICE: $125.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 615105-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 615105-531
|
The Mitutoyo grade 0 square wear gage block is made of tungsten carbide, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke bloc...
-
3.5 of 5.0 with 42 Reviews
SALE PRICE: $129.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613201-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613201-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement o...
-
3.5 of 5.0 with 41 Reviews
SALE PRICE: $134.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611174-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611174-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
3.5 of 5.0 with 38 Reviews
SALE PRICE: $136.80
Manufacturer: Agilent Technologies
Brand: Agilent Technologies
Manufacturer: Agilent Technologies
Brand: Agilent Technologies
Agilent Rectangular cell OG 1mm 350uL open. 1/pk - 58
-
3.5 of 5.0 with 4 Reviews
SALE PRICE: $142.90 2% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4101-0610
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4101-0610
HHIP radius cylindrical jaw pair is rectangular gage block accessories. Size is 0.0787".
-
3.5 of 5.0 with 11 Reviews
SALE PRICE: $148.80
Manufacturer: HHIP
Brand: HHIP
Manufacturer: HHIP
Brand: HHIP
Pro-Series Precision 1/4 X 6" 9 Pair Parallel Set With No Holes ~ Comes with a statement of certificate of accuracy, tolerance & hardness. ~ Made from fine quality, precision ground and hardened, alloy tool steel that has been stress relieved against distortion. ~ Each parallel size clearly marked. ~ Case hardened RC 52 to 58. ~ Complete with fitted wood case. ~ Total parallelism within the entire length to .0002". ~ Flatness or straightness to .0002". ~ Height dimensions are + or - .0002". ~ Width/thickness to + or - .005". ~ Squareness to the adjacent sides with each other is .002 to.004".
-
3.5 of 5.0 with 26 Reviews
SALE PRICE: $219.70
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Features Made from high-grade alloy steel, hardened and ground from 1/32" stock with 2 holes in each parallel. 10 pairs, 6" length, 1/32" width. 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2" .0001" Paired in height: .0001" Hardness: 50 HRC
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $22.95
-
3.0 of 5.0 with 3 Reviews
SALE PRICE: $22.99 1% OFF
Manufacturer: HardwareFactoryStore.com
Brand: HardwareFactoryStore.com
Manufacturer: HardwareFactoryStore.com
Brand: HardwareFactoryStore.com
Product description Size within +/- .0001" Flatness and parallelism within .0001" Accuracy and squareness on all sides within .0001"-.0002" Pairs are matched to a tolerance of 0.0002" Product application Used for set-up. layout and inspection jobs Product features Has 23 holes with 5 holes tap to 3/8-16 threads for clamping and 18 untapped holes Made of hardened tool steel and precision ground on all six sides Cross drilling design allows efficient use of lower weight with maximum strength Heat treat and hardness 56 to 60 RC 2 pieces per set Weight: 2.1 Lbs
|
|