|
|
-
4.9 of 5.0 with 7 Reviews
SALE PRICE: $26.30 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0909
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0909
.1007" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
4.9 of 5.0 with 1 Reviews
SALE PRICE: $29.50 1% OFF
Manufacturer: ABS Import Tools
Brand: HHIP
Manufacturer: ABS Import Tools
Brand: HHIP
Grade AS-0 (2) | Each block is supplied with a manufacturer's certificate
-
4.9 of 5.0 with 28 Reviews
SALE PRICE: $36.79 1% OFF
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
-
4.9 of 5.0 with 45 Reviews
SALE PRICE: $48.25 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613119-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613119-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment...
-
4.9 of 5.0 with 4 Reviews
SALE PRICE: $52.99 1% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
-
4.9 of 5.0 with 28 Reviews
SALE PRICE: $55.00 1% OFF
Manufacturer: Federal Mogul
Brand: Federal Mogul
Manufacturer: Federal Mogul
Brand: Federal Mogul
From our inventory we are selling a New Federal Mogul 91660-001 Cabling for Inspection Gauges. Specifications: Model #: 91660-001  ST15-4-F
-
4.9 of 5.0 with 31 Reviews
SALE PRICE: $55.82 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614613-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614613-531
|
The Mitutoyo grade 0 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks...
-
4.9 of 5.0 with 48 Reviews
SALE PRICE: $62.49
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
Used for set-up, layout and inspection jobs. Supplied in matched pair. (5) 5/16"-18 tapped holes, arranged for holding down and conversion into angle plates.
-
4.9 of 5.0 with 10 Reviews
SALE PRICE: $64.04 15% OFF
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0962
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0962
6 piece Tanget bar and angle block set | Tangent bar is micrometric | Made of tool steel hardened and precision ground | Includes one tangent bar and one each of angle blocks 5, 10, 20, 30, 45°
-
4.9 of 5.0 with 10 Reviews
SALE PRICE: $75.90 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614626-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614626-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke...
|
|