Pin Gauges - Page 19

Manufacturer: CME Brand: CME Tools

Description: 36 pcs/set steel space block set,round gage block set Work face hardened to 57-60 HRC Supplies with one hex wrench and 4 connecting screws. Each block clearly marked for size 9 blocks: .101" - .109" in .0001" steps 15 blocks: .050" - .109" in .10" steps 9 blocks: .20" - .1" in .10" steps 12 blocks: .0625" - .125" 1 extra 1.000" block Fitted in heavy duty and precision made box.

Manufacturer: INSIZE Brand: INSIZE Model: IST-2W-2K5C

Open end head.

Manufacturer: Fowler Brand: Fowler

Fowler .251-.500 Pin Gage Handle 53-885-002

Manufacturer: General Tools Brand: General Tools

Made of heat treated heavy gage steel, machined and ground to close tolerances;Number size drills 1 to 60;Hole sizes and decimal equivalents are permanently marked on the face;6-1/2 x 2-1/2 wide;Conform to government specifications GG-G-86b;Stainless steel

Manufacturer: AR Specialties LLC Brand: AR Specialties LLC

The GO gauge is used to measure the minimum allowable, safe chamber headspace. If the bolt does not close on a Go gauge, it is considered unsafe. The NO-GO gauge is used to measure the Maximum recommended chamber headspace. If the bolt closes on a NOGO gauge, it is out of the new or recomended good condition range.

Manufacturer: Vermont Gage Brand: Vermont Gage

These economical general purpose Vermont pin gages make quick and accurate measurements and can be used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. Packaged with a rust preventative features, these pins maintain an indefinite shelf life.

Manufacturer: Vermont Gage Brand: Vermont Gage

These economical general purpose Vermont pin gages make quick and accurate measurements and can be used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. Packaged with a rust preventative features, these pins maintain an indefinite shelf life.

Manufacturer: Vermont Gage Brand: Vermont Gage

These economical general purpose Vermont pin gages make quick and accurate measurements and can be used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. Packaged with a rust preventative features, these pins maintain an indefinite shelf life.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: HHIP Brand: HHIP Model: 4103-0156

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".