Reference Gauges - Page 91

Manufacturer: ZFE Brand: ZFE

ZFE 1pc Metric Plug Thread Gage Gauge Size M48X2mm Product Name : Thread Plug Gage Class : 6H Thread Diameter: M48 Thread Pitch : 2mm Material : Steel Color : Black, Silver Tone Package Content : 1 x Thread Plug Gage

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Starrett Brand: Starrett Model: SD167GHZ

The set includes ranging from 0.010" - 0.025" ( 0.005" increment), 0.030" - 0.10" ( 0.010" increment), 0.120" - 0.300" ( 0.020" increment), 0.350" - 0.500" ( 0.050" increment), 26 gauges in set. Two slots are provided in the holder permitting gages to be held at 30 degree or 45 degree, either square in the slot or tipped to one side. The holder is 4" (100mm) long, providing good reach and balance. The set is furnished in an attractive case, providing complete protection and easy, instant selection of the right gauge size for the job.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-440-750-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: L.S. Starrett Brand: Starrett

Technical Specification Item Pin Gage Plus Set Shape Round Material Steel Measuring Range (In.) 0.751 to 0.832 Increments (In.) 0.001 Tolerance 0.0002 Length (In.) 2 Application Used to Determine Small Hole Sizes/Gage Slots/Find Hole Distances Includes Case Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-635-601-0

The Fowler-Wyler 54-635-601-0 Clinotronic Plus is an electronic level with unsurpassed versatility. It is economically priced, uses a specially designed microprocessor and the well-proven WYLER inclination sensor. Range of ± 45° with a capacity of 0 - 360°. 15 selectable measuring units. Take absolute or relative measurements. Uses 1 AA battery and will not loose calibration due to loss of power. Hard anodized housing. 4" x 3" x 1" with large LCD display This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: HHIP Brand: HHIP Model: 4103-0016

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0177

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".