Carpentry Squares - Page 35

Manufacturer: safedeals365 Brand: Safedeals365

Size: 12" (300mm) Application: In use, the body is aligned against the one edge of the object and the blade is presented to the end or body of the object. If the end is being checked, then a strong light source behind the square will show any mismatch between the blade of the square and the end of the object. The purpose of this action is to either check for squareness or to mark out the body of the work piece.

Manufacturer: CR Laurence Brand: CR Laurence

Overall Length: 48 in (1219.2)Length: 48" (1219 mm)2" (51 mm) Wide Aluminum BladeEasy to Read MarkingsThis superior T-Square has markings that are clear and easy to read. One edge has markings graduated in 1/8ths of an inch, and the other edge is in 1/16ths. The body is 2" (51 mm) wide and .081" (2 mm) thick aluminum.

Manufacturer: Swanson Tool Brand: Swanson Model: AD124

This adjustable drywall square stores easily thanks to its fully adjustable head, while high-grade aluminum construction means it resists utility knife nicks and scratches. This unique tool allows the user to easily make angle marks and transfer & match angles, which are permanently impressed at 30°, 45°, 60°, and 75°, on plywood or drywall. The Swanson 48-Inch Adjustable Aluminum Drywall Square has a fully adjustable head. This heavy-duty drywall square is built a with 1/4-inch thick blade with thermo-bonded gradations. It comes with Swanson's 1-year limited warranty.

Manufacturer: iGaging Brand: iGaging

This premium square features a 12 Inch blade, a cast iron center finding head, a cast iron 180 degree protractor head and a cast iron square/miter head with 45 degree and 90 degree precision ground faces. The adjustable heads may be locked securely in any position along the precision ground satin chrome finished steel blade. The protractor head can be moved in both directions. The blade features etched, machine divided graduations in 1/8 Inch and 1/16 Inch on one side and 1/32 Inch and 1/64 Inch on the other. The square/miter head incorporates a spirit level and hardened scriber. The square comes packaged in a padded plastic storage case.

Manufacturer: Grizzly Brand: Grizzly Model: G8072

All the essentials for determining plumb and square. 45deg and 90deg square head, center head, bubble level and scribe at a terrific, low price. This 12" square offers both metric and fractional graduations on its hardened steel blade. Center and square are finished in a durable baked enamel finish. A pinpoint scribe with a knurled head is housed in the square for quick access.

Manufacturer: Swanson Tool Brand: Swanson Model: T0111 Color: Grey

The gray Swanson Speedlite Level Square combines a rafter/framing square, protractor, try/miter square, and saw guide into 1 tool. Manufactured from lightweight, high impact polystyrene, the 8-inch Speedlite Level Square won't scratch surfaces and has a built-in block level that is easy to read from all angles. It also features a center line guide for locating the center of round stock, and comes with a 1-year limited manufacturer's warranty. The gray Swanson Speedlite Level Square combines a rafter/framing square, protractor, try/miter square, and saw guide into 1 tool. Manufactured from lightweight, high impact polystyrene, the 8-inch Speedlite Level Square won't scratch surfaces and has a built-in block level that is easy to read from all angles. It also features a center line guide for locating the center of round stock, and comes with a 1-year limited manufacturer's warranty.

Manufacturer: Alvin & Company, Inc. Brand: Alvin Model: W24

Economically designed for academic use. Seasoned hardwood construction with practical, attractive natural finish and smoothly finished edges for precise drawing. Fixed head secured with epoxy plus metal fasteners.

Manufacturer: Kapro Brand: Kapro Model: 309-12 Color: Stainless-Steel

Kapro has developed a simple way to make everyday carpentry jobs easier. The 309 Ledgend has a unique, ergonomic handle with a support ledge that holds the work surface, so it stays square – hands-free – when you need to mark or reach for other tools. A pencil-notch on the support ledge is designed as a reference point. And the hardened, tempered stainless-steel ruler is chemically etched with all the angles you'll ever need. Just mark two points and draw a line.

Manufacturer: Swanson Tool Brand: Swanson Model: SVC133

The SAVAGE Combination Square is great for laying out lines for ripping, crosscutting, mitering, and making notches. The head, with fences at 90 and 45 degrees, slides along the blade and locks, allowing you to transfer a distance accurately and hold it while you draw a line with a pencil. The Combination Square is right up there with the claw hammer, pencil, and tape as tools that every carpenter carries all the time. Small enough to fit in your back pocket this tool is indispensable. This tool is also great for a general contractors inspecting a job for plumb corners, and perfect angles.

Manufacturer: Johnson Level & Tool Brand: Johnson Level & Tool Model: 1926-1000

10" Professional Carbonized Bamboo T-Bevel Bamboo is harder than most woods used today and you don't have to cut down any trees go get it. How To Use a Sliding T Bevel The sliding T-bevel can be used to either originate an angle or trace and transfer a current angle. Listed are the steps necessary in order to use the sliding T bevel. To make a new angle: -Loosen the wing nut adjustment so that the blade is free to rotate. -Swing the blade until the desired angle between the handle of the bevel and the blade side is made. This may be best achieved by placing a protractor on the inside of the bevel itself (so that the protractor is resting on the wing nut) and measuring out the desired angle. -Lock the T bevel into place by tightening the wing nut. -Lay the T bevel on your working surface and draw the angle by tracing along the inside of the T bevel blade and handle. -Cut away! To transfer an existing angle: -Loosen the wing nut adjustment so that the blade is free to rotate -Lay the T bevel against the surface of the angle cut to be copied. -Rotate the inside edge of the blade to the existing angle until it matches the angle being transferred. -Tighten the wing nut until it locks the blade and handle in position. -Place the T bevel on the working surface and transfer the angle. -Draw out the angle by tracing along the bevel on the inside edge of the blade and handle.