Straight Edges - Page 21

Manufacturer: STAKF Brand: Starrett Model: 385-12

These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The No. 385 Series are beveled one edge, but not graduated. The No. 385 Series in sizes 36" and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently.

Manufacturer: Kimberly-Clark Professional Brand: Jackson Safety Model: 14786

A versatile tool that can be used as a dial degree utility level or, with attachments, for two-holding flange alignment. Constructed of cast aluminum with a protective housing containing an adjustable DSL. Fitted with a threaded, self-aligning conical spacer and conical nut and bolt units for fastening the Level to a pipe flange. Can be used on PVC pipe. One of the nut and bold units is stationary, while the other slides up to 5-1/2" along a slot in the level to accommodate various flange bolt hold spacings from 2" to 5-1/2".

Manufacturer: Starrett Brand: Starrett Model: 387-24

These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The No. 387 Series has one edge that is both beveled and graduated in 32nds of an inch. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently.

Manufacturer: iGaging Brand: iGaging Model: 36-024-KS

When it comes to Jointer setups, layout, drafting, lapping the sole of a hand plane, or checking lumber for warp, a precision straight edge is an essential tool for the shop. These premium straight edges are meticulously ground and lapped for straightness and Parallelism, and they feature a beveled edge with a precision 1/64 inch scale, which means they double as precision rulers. Available in 12", 24 inch and 36 inch lengths, they feature a hanging hole, and include a protective case If you prefer to store them in a drawer. Technical details: igaging precision straight edges are made of hardened steel. Accuracy: 0.001".thickness: 3/16". width: 1-9/16". satin chrome finish. All edges have true right angles. Bevel edge has 1/64 inch precision scale in us standard.

Manufacturer: Barwalt Brand: Barwalt Model: SE-8

Made of tempered aluminum to make them tough, yet light.Size:8.FT Long x 3" High x 7/8" Wide.

Manufacturer: Kimberly-Clark Professional Brand: Jackson Safety Model: 14772

Designed for use with the standard contour markers, the Adaptor simplifies handling and increases layout capacity. Permits use of all four sides of the contour marker and allows marking on small diameter pipe, over nipples, old weld or on wrapped pipe. Also provides layouts with compound angles using a single setting, or any degree of takeoff on elbows and turns up to 90 degrees. Use with #1 Contour Marker.

Manufacturer: Westward Brand: Westward

Edge Finder, Single End Type, Face Size 0.2 In, Length 4 In, Shank Dia 0.5 In, Steel, Find Edge Location Off Any Conductive Metal, Center Point 0.200 In, LED, R-5 Alkaline Battery, 6 Equally Spaced Light Ports, Includes Protective Sleeve

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-480-050-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-480-060-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Starrett Brand: Starrett Model: 387-18

These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The No. 387 Series has one edge that is both beveled and graduated in 32nds of an inch. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently.