Layout Tools - Page 33

Manufacturer: Starrett Brand: Starrett Model: C616R-6

C616R-6 6" Spring-Temper

Manufacturer: Swanson Tool Brand: Swanson Model: IBX480 Color: Silver

SWANSON I-BEAM LEVEL Lenth : 48 1-Level, 2-Plumb Advanced structural aluminum frame Rubberized end caps to protect against shock Heavy duty I-Box frame offers superior durability Super-Shock end caps for superior shock absorption Diamond bumpers prevent scratching and marring Durable block vials are accurate to 0.029 degrees Multi-ring vials indicate 2 and 4 degree grade for drainage pitch. The Swanson I-Box 48-Inch Level features rubberized end caps protect against shock when dropped or bumped. An advanced structural aluminum frame provides this level with maximum durability. It includes an impact-resistant solid block vial and comfort grips for ease of handling. This silver level comes with Swanson's 1-year limited warranty.

Manufacturer: Mitey Miter Brand: Mitey Miter Model: 73-00044 Color: Stainless Steel

Q: Why was the Mitey Miter Tool developed? A: The Mitey Miter Tool was developed to offer a tool that simplifies miter cuts. By using the Mitey Miter Tool you will save time, money, and reduce wasted material. Q: What does the Mitey Miter Tool do? A: The Mitey Miter Tool measures and divides any angle achieving an accurate fitting miter joint without using math or calculations. Q: What is a Miter Joint? A: A miter joint is the most common joint between two pieces of material that meet at an angle, in which each piece of the butting surface is cut into two equal halves. Q: Who can use the Mitey Miter Tool? A: Homeowners, Re-modelers, Contractors, Deck Builders, Metalworkers, Finish Carpenters, Tile/marble installers, and Framers (anyone who needs to measure and divide an angle). Q: Why should I use the Mitey Miter Tool? A: The purpose of the Mitey Miter Tool is to provide an accurate fitting miter joint. Even if you can figure out an angle without using the Mitey Miter Tool, odds are you will be measuring an object that is not square or level such as a wall, a floor, deck, picture frames, etc. which can cause your calculations to be off resulting in wasted time, and materials. The Mitey Miter Tool is just the tool to take away the frustration and guesswork of finding an accurate fitting miter joint each and every time. Q: How will I measure an angle? How do I divide a miter? What degree will it be? A: Who cares! Just cut on the line created by your Mitey Miter Tool!!! Don't Wait - Click "Add To Cart" Now!

Manufacturer: Guilin GemRed Sensor Technology Co., Ltd Brand: Gemred

GemRed 82112 digital levelMechanical specifications Color: silverlength:400mmmagnet: YES. Built in the bottomProtection grade: IP50 The length of work area: (total length-16) Electrical feature: EMC2 level Sensitivity: 30 +-10 Points. Angle error: 2mm/m Maximum permissible error of zero: +-1.1mm Stabilization time of bubble: less than 8s.Technical data: Resolution: 0.1?? Accuracy: 0.2?? Measuring Range: 4*90°(0°~360°) Weight(Incl. battery): Approx 330g Work temperature: + 5 degree~+50 degree Work humidity: < =85%RH Power: 2 *LR03(AAA) battery(Included) Battery life: Approx 100 hoursPackaging Details: Paper box packing, 1 product +paper box +2 batteries +manual.

Manufacturer: Yongkang Lison Industry and Trade Co. , Ltd Brand: AMYAMY

Specification model:X40 Measurement accuracy :+/-2mm Measuring units:m/in/ft Measuring range(Non reflecting plate):0.03-40/50/60/70/80/100m Measuring time:0.1-3s Laser class:II*** Laser type:635nm,15,000 measurements Weight:80g Operating temperature range:0¡æ~40¡æ Storage temperature range:-25¡æ~60¡æ *Under the condition of poor measurement(Such as ambient light is too strong,diffuse feflectivity of the measured point is too large or too small)Measurement accuracy will have a greater error ¡À1mm+400PPM **Under the strong sunlight or the measurement target reflection is not good,please use the baffle-board.

Manufacturer: Marshalltown The Premier Line Brand: MARSHALLTOWN The Premier Line Model: HT54

MARSHALLTOWN Standard Drywall T-S

Manufacturer: Agile-shop Brand: Agile-shop

Need to 3V CR2032 Lithium manganese battery(Do not include) Up to 600mm ruler measurement range Digital display measures 1" wide by 1/2" high Scaled at 1/32" imperial intervals on one side and 1mm metric on the other High resolution of 0.1° and easily transfer miter angles with no calculations Stable locking function, lock measurement at any angle Useful to applications such as automobile, tools, constructions, boating, woodworking and machining Package content : 1 x Meter Protractor Ruler

Manufacturer: PEC Brand: PEC

Made of hardened and tempered steel. Satin Chrome Finish. Made in USA by PEC Tools. 16R graduation shows 32nds, 64ths, 50ths, 100ths.

Manufacturer: Yongkang Lison Industry and Trade Co. , Ltd Brand: AMYAMY

Specification model:X40 Measurement accuracy :+/-2mm Measuring units:m/in/ft Measuring range(Non reflecting plate):0.03-40/50/60/70/80/100m Measuring time:0.1-3s Laser class:II*** Laser type:635nm,15,000 measurements Weight:80g Operating temperature range:0¡æ~40¡æ Storage temperature range:-25¡æ~60¡æ *Under the condition of poor measurement(Such as ambient light is too strong,diffuse feflectivity of the measured point is too large or too small)Measurement accuracy will have a greater error ¡À1mm+400PPM **Under the strong sunlight or the measurement target reflection is not good,please use the baffle-board.

Manufacturer: Starrett Brand: Starrett Model: ASE-96

Aluminum Yardstick or Meterstick is a parallel, accurate and flexible rule made of anodized Aluminum.