Bore Gauges - Page 2

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-646-500-0

The Fowler 54-646-500-0 X-tender Dial Bore Gage Set has a measurement range of 1.4 to 6" and indicator graduation is 0.0001". A two-point contact system is used to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. The gage is self-centering and includes a 2” extension holder. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at various depths, while internal micrometers can only measure to the depth of their contact surfaces. Bore gages are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display it through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, indicating how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with repeatable results from one operator to another. Bore gages can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.What’s in the box: • Digital Bore Gage (with 2 measuring heads) • 1 2” extension • 4 anvil spacers • Instructions • Fitted case

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-752

The Mitutoyo 511-752 bore gauge is for performing close tolerance inside diameter measurements. The gauge (511-732) has a measurement range of 1.4 to 2.5", graduations of 0.0001", and an accuracy of + or - 0.0002". The dial indicator (2923SB-10) interface provides precise and easily readable measurements in inches. The contact points of this gauge are carbide-tipped for durability. This unit has a large, hollow-structured grip to reduce heat from the operator for accurate measurements. It comes with six anvils and four spacers for taking measurements, and a cover to protect the dial. The dial is balanced and has a reading of 0-5-0. The gauge has a measuring force of 4.0 Newtons (N) or less and a guide force of 6.0N or less.SpecificationsRange1.4 to 2.5"Graduations0.0001"Accuracy+ or - 0.0002"Range per revolution0.01"FaceDial, white face, shockproof, jeweled bearingDial reading0-5-0Measuring force4.0N or lessGuide force6.0N or lessStroke of contact point0.047"Probing depth6"Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-212

The Mitutoyo 511-212 Dial Bore Gauge for Small Holes has a measurement range of 0.24 to 4" and is accurate to + or - 0.0002". It is precise to 0.0001". This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and tape, and carbide-tipped contact points offer extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-205

The Mitutoyo 511-205 Dial Bore Gauge for Small Holes has a measurement range of 0.4 to 0.75" and a stem outside diameter of 0.375". This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and tape, and carbide-tipped contact points offer extended wear and improved abrasion resistance. This gauge is for use with Mitutoyo dial indicators (sold separately).Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 515-590

The Mitutoyo 515-590 bore gage zero checker allows zero adjustment of dial bore gages with a range of 18 mm (0.7") through 400 mm (16") using gage blocks (sold separately). It checks zero point for measurement quality assurance. The flatness of the parallel jaws is 0.5 micrometers, and the parallelism of the parallel jaws is 1 micrometer. The set includes a stand, three attachments, and two dedicated jaws. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display it through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, indicating how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What’s in the Box? Mitutoyo 515-590 zero checker stand Three attachments Two dedicated jaws

Manufacturer: PEC Brand: PEC

Blades are of a narrow design to permit their use in determining pitch for inside and outside screw threads. Sturdy steel protective case with a locking device at each end to secure the entire set.

Manufacturer: INSIZE Brand: INSIZE Model: 7350-E16

Anvil for bore gages.

Manufacturer: INSIZE Brand: INSIZE Model: 4206-1

Telescoping gage set, 5/16 ~ 6 inch.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-0D8

Setting ring, 8 inch dia.

Manufacturer: Williams Brand: Williams Model: 8G04W

The Williams Hydraulics 8G04W 4 inch Face Diameter Liquid Gauge has a thread of 1/4 inch to 18NPTF, a pressure range of 0 to 10,000 psi and a 0 to 700 bar, a major graduation of 2,000 psi (100 bar) and a minor graduation of 200 psi (10 bar).