Bore Gauges - Page 29

Manufacturer: INSIZE Brand: INSIZE Model: 6313-0D552

Setting ring, 552 inch.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-15H32

Setting ring, 15/32 inch dia.

Manufacturer: ABS Import Tools Brand: HHIP

.0001 GRADUATION | DIAL INDICATOR | 2~6" Range | For closer tolerance measurements of holes, taper and roundness. | Self centering. | Gages are supplied with AGD Group II dial indicator. | Easy setting with micrometers or ring gages. | Fitted case with an

Manufacturer: ABS Import Tools Brand: HHIP

.0001" / .001MM RESOLUTION | Zero reset allows absolute or comparative measurements | Extra large LCD, 360°rotation | Dual display: digital and electronic scale | Power supply: 3V CR2032 lithium battery | True inch/mm conversion | One button easy calibrat

Manufacturer: Flexbar Brand: Flexbar

Calibrated Cylindrical Grinding Comparator for MicroinchTM Comparator Plates. Comparator Plates feature: surface roughness (texture) comparison standards made of solid electroformed nickel; the largest variety of standards available for assessing and specifying, by Symbol, the degree of roughness of machined parts, including every machining method known.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-702

The Mitutoyo 511-702 Bore Gauge without Indicator has a measurement range of 35 to 60 mm. The grip reduces the influence of heat from the operator's hand during use to retain high-accuracy measurement. This gauge uses a two-point contact system for the detection of geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. This gauge is for use with Mitutoyo dial indicators (sold separately).Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Fowler Brand: Fowler Model: X Class

Features X Class Used for accurate setting of internal measuring instruments Made from oil-hardened, non-shrinking gage steel, hardened and tempered to Rockwell 62C Subzero treated at minus 80 C for dimensional stability Actual size etched on each master ring

Manufacturer: Starrett Brand: Starrett Model: 690-4Z

The Starrett 690-4Z Hole Gauge Dial Bore Gauge has a measurement range of 0.230 to 0.330" and gradient spacing of 0.001". The gauge can be pressed down on a flat surface and checked so the size reads the same as the set number stamped on the back of the indicator. The balanced design makes for easy one-handed operation and all ground surfaces are made of hardened tool steel for durability.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads And Setting Rings. Model No. 20309, Triga-BoreTM Pistol Grip Style Bore Gage Handles, Accepts Heads: .630"/16mm - .784"/200mm . All Handles Accept 3/8" Indicator Stems/Probes - 8mm Stem Bushing Is Included

Manufacturer: Starrett Brand: Starrett Model: 82C1

The Starrett 82C1 Head for Dial Bore Gauge has a measurement range of 0.560 to 1.565" and gradient spacing of 0.0001". This indicator is for use with Starrett 82 probes (sold separately). Measurement readings are in inches. This direct-measuring gauge head is useful for controlling approach to tolerance without removing the workpiece from a machine.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.