Bore Gauges - Page 34

Manufacturer: INSIZE Brand: INSIZE Model: 6313-27H32

Setting ring, 27/32 inch dia.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-2D4

Setting ring, 2.4 inch dia.

Manufacturer: TTC Brand: TTC

Manufacturer: INSIZE Brand: INSIZE Model: 2827-6

Bore gage, 2-6", graduation 0005".

Manufacturer: Fowler Brand: Fowler

Features All supplied in a high quality aluminum case. Setting Device Base anvil: 2.750" x .80" (2) Adjustable anvils: 2.375" x .375" Internal capacity: 0 ~ 6" (0 ~ 150mm) Depth capacity: 0 ~ 1" (0 ~ 25mm) Centralizer capacity width: 2.625" (66.7mm) Quick-release holder for fast adjustment. Economy Gage Block Sets 36 Piece Inch Model Tolerance: ±.00005" Certificate of Calibration to N.I.S.T. 33 Piece Metric Model AS-2 grade. Certificate of Calibration to N.I.S.T

Manufacturer: Starrett Brand: Starrett Model: 84Z-134-5J

The Starrett 84Z-134-5J Dial Bore Gauge has a measurement range of 3 to 5.1875" and gradient spacing of 0.0005". Two centralizing plungers provide accurate tool alignment within the bore. This direct-measuring gauge uses a two-point contact system for detection of geometry problems such as ovality and taper. Contact points are made of hardened tool steel contact points for wear resistance and are spring-loaded for sensitivity. The housing and knurled handle are made of aluminum for a lightweight feel and good balance. Dial indicators have jewel bearings for sensitivity and the gauge is furnished in a finished wood case.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads . True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20321, 3-Point Bore Gage Heads, Head Size 1.968-2.362"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-303

The Mitutoyo 511-303 bore gage has a measurement range of 250 to 400 mm, with + or - 5 micrometers of accuracy. The micrometer head travels 50 mm, and the probe depth is 250 mm. There are two 50 mm anvil extensions for the micrometer head. These interchangeable anvils attach to the micrometer head for accurate dimensional setting, and to expand the measurement range. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What’s in the Box? Mitutoyo 511-303 bore gage Two 50 mm anvils

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-255-310-0

The Fowler Inch Series XT Holemike Bore Gauge has a ratchet stop for consistent measuring and non-removable anvils. This direct-measuring gauge uses a three-point contact system and tungsten carbide contact points above 0.5". Setting rings are included. Each gauge is individually serialized.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: INSIZE Brand: INSIZE Model: 7350-E24

Anvil for bore gages.