Accessories - Page 7

Manufacturer: INSIZE Brand: INSIZE Model: 7381-T14

Measuring tips for screw thread micrometer, 13-9tpi/2-3mm.

Manufacturer: INSIZE Brand: INSIZE Model: 7392-T2

MULTIFUNCTIONAL POINTS, spherical, pair.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 905691

Applicable gauges: all calipers without absolute encoder height gauge 570-2XX, 192-6XX, 192-67X indicators 575-XXX, 543-6XX, 543-2XX, 543-4XX depth gauges 547-21X, 547-25X, 571-2XX Scale Unit 572-XXX thickness gauges 547-3XX, 547-4XX.

Manufacturer: Starrett Brand: Starrett

End Measuring Rod, Dia. 1/4 In., Range 6 In., For Use With 7 In. Micrometers, Includes Insulating Rubber Handle End Measuring RodsUse for checking and setting micrometers of 2" capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-184-9996 is a fitted, wooden case for Series 44, 0" to 12" outside micrometer sets. The case is made of wood for durability and is fitted to hold multiple micrometers plus accessories. It has a piano hinge that attaches the lid to the body of the case and two latches that provide secure closure. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: INSIZE Brand: INSIZE Model: 7392-T6

MULTIFUNCTIONAL POINTS, knife-edge, pair.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA interchangeable thread inserts for TESA AC series micrometers are an accessory for use with the Brown & Sharpe TESA Micromaster AC or Isomaster AC micrometer. The V-anvil and conical spindle tip pair have a 60-degree flank angle and are sized in inch units for measuring the pitch diameter of screw threads conforming to the Unified Inch Standard, including UN, UNC, and UNF series. The thread inserts are made of hardened steel for durability.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 234MA-450

Starrett 234MA-450 End Measuring Rod with Insulated Handle and Spherical Ends, 450mm Length. Starrett 234 End Measuring Rods or “standards” are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA interchangeable thread inserts for TESA AC series micrometers are an accessory for use with the Brown & Sharpe TESA Micromaster AC or Isomaster AC micrometer. The V-anvil and conical spindle tip pair have a 55-degree flank angle and are sized in inch units for measuring the pitch diameter of Whitworth screw threads. The thread inserts are made of hardened steel for durability.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.