Indicator Stands & Bases - Page 14

Manufacturer: Flexbar Brand: Flexbar

3 Piece Inspection Tool Kit includes One Each of the following: 0-1" Micrometer With .0001 Reading, Carbide Tips and ratchet stop. 6" stainless steel Dial Caliper With .001 Graduations,100 revolution and covered rack. 6" 4R Scale: reads in 1/8ths, 1/16ths, 32nds and 64ths. Fitted Plastic Case.

Manufacturer: Starrett Brand: Starrett Model: 57S

STARRETT Nos.57S Series Unive

Manufacturer: Flexbar Brand: Flexbar

Model No. 18518,Lifting Lever Attachment for Model Numbers 18318 & 18319.

Manufacturer: Mark-10 Brand: Mark-10 Model: ESM301-003

Mark-10 manufactures force and torque measuring instruments for automotive, textile, pharmaceutical, and medical industries. The company, founded in 1979, is headquartered in Copiague, NY.

Manufacturer: Flexbar Brand: Flexbar

Flexbars On Weighted Bases . Made In U.S.A. Instant Positioning - Instant Locking Universal Holder/Positioners For All Agd Indicators And Electronic Sensors (Lug Backs Too!). The Heavy Duty Flexbar Is Completely Flexible; Lets You Reach Over, Under, Around, Instantly And Surely. Elimination Of The Large Assortment Of Rods, Swivels, Clamps And Other Hardware Necessary To Reach And Measure In Obstructed Areas. Cuts Set-Up Time As Much As 75% To 90%. Flexbar Sets And Locks With A Simple Twist Of The Lever. Top Mounting Clamp: (Telescopic Action) Grips Objects From .125" Up To .510" Diameter. Cable And Swaged Fittings Are Stainless Aircraft And Mil Spec Grade. Locked By Tensioning Of Cable, Incredible Rigidity Is Achieved By This Design. (No Movement Once Locked). Cam Action Locking. Now, Universal And Off-The-Post Style Flexbars Are Available Mounted On Heavy Duty 6" Dia. Weighted Base. Ideally Suited For Benchtop And Laboratory Uses.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-580-109-0

The Fowler 52-520-109 dial indicator with hydraulic-arm magnetic base has an American Gage Design (AGD) Group 2, 2-1/4" dial face with a continuous dial, a 0.40" measuring range, 0.001" graduations, a revolution counter, and tolerance markers, and is designed to measure surface variations in fractions of an inch. The indicator is dustproof, waterproof, oil-proof, coolant-proof, and shockproof. The 0-100 continuous dial with revolution counter has a total measuring range of 0.40" and 0.001" graduations, with each revolution equal to 0.1". An adjustable bezel and dial sets the zeros the reading at any location. Tolerance markers allow operators to observe limits at a glance. The magnetic base has a 75lb. pull and a hydraulic arm that eliminates vibration and movement during use, and can be micro-adjusted on two ball sockets. An on/off lever releases the magnet.The set includes a dial indicator and granite-base stand. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. SpecificationsDial face type and diameter AGD Group 2, 2-1/4" diameter face Dial type and reading Continuous 0-100 Range and graduations 0-1" Graduations 0.001" Revolutions Up to 10 revolutions, each revolution equal to 0.10" Base material Granite Base dimensions 2 x 6 x 6 inches (H x W x D) Column height 8" Specifications AGD Group 2H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measuremen...

Manufacturer: Sterno Brand: Sterno

Pop-Up Chafer SetFold-down frame for easy, space-saving storage. Includes water pan, 2 food half-pans, 2 cans of 2-hour gel chafing fuel, utensils, and folding rack.Hazardous MaterialChafer Set, Overall Dimensions 12 3/4 In. x 20 3/4 In. x 5 1/2 In., Material Aluminum, Includes Water Pan, Two Food Half Pans, Two Cans of 2-Hour Gel Chafing Fuel, Utensils, Folding Rack, Package Quantity 4

Manufacturer: Starrett Brand: Starrett Model: 670B

The Starrett 670B hole attachment is used with any dial indicator made to American Gage Design (AGD) standards to measure the inside of holes of other recessed areas. The attachment has a 0.375"/9.5mm diameter stem and a 0.5625"/14mm measuring range for hole depths up to 1.6875"/42mm. The contact point on the end of the swivel arm which contacts the workpiece has a 1/8"/3mm diameter.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 657P

Starrett 657P Magnetic Base indicator holder is compatible with indicators from Starrett and other manufacturers, has a push-button on/off switch, a V-step, grips three ways, and measures 1-15/16 x 1-5/8 x 1-7/8 inches/50 x 40 x 48 mm (H x W x D). (H is the vertical distance from lowest to highest point; W is the horizontal distance from left to right; D is the horizontal distance from front to back.) The base has three precision-ground, magnetic contact points to grip horizontally, vertically, and upside-down, and a push-button on/off switch for one-handed operation. A V-step holds the base to arbors, shafts, and other cylindrical items. The base has an additional 1/4-20 tapped hole on one side for mounting the post. The magnetic base has a non-skid, black wrinkle finish on all non-working surfaces. For use with all Starrett test, back-plunger, dial, AGD, and miniature-dial indicators, as well as similar indicators from other manufacturers. Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators, and are also used in other fields, such as optics. Magnetic bases can assist the user with setting up a workpiece in a milling machine, surface grinder, or other machine tool. The vertical post and rod in a magnetic base connect using swiveling connectors, or snugs. This allows free motion of the arm so that the dial indicator can be moved into position on the workpiece. Many magnetic bases have a V-step, which is a V-shaped notch in the base for holding the base to arbors, shafts, and other cylindrical items. The magnetic base has a circular hole through the center. A round permanent magnet is inserted into this hole, and a handle or button is attached to allow the user to rotate the magnet. Rotating the magnet turns the base on and off as this causes the position of the magnetic field to rotate as well. In the on position, the iron is acting as an extension of the magnet, while in the off position, the magnet is acting as a keeper, preventing the magnetic field from extending throug...

Manufacturer: Fisso Brand: Flexbar

Flexbar Made in America Magnetic Base and Magnetic Base Stands. Flexbar Magnetic Bases are manufactured, Machined, powder coated and assembled in the U.S. from start to Finish. Our goal is to Produce a Superior AmeriCan-Made Precision tool. Flexbar bases have 180 pounds of pulling force, all metal part construction, and are made to precision ground tolerances.